[Wed Feb 15 10:14:07 2012] Detection parameters:
  Position = (321.1, 464.0) = 5 34 29.41 22 11 33.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 232.7 +/- 24.5
  Background counts = 85.6
  Rate = 0.03 +/- 0.003

[Wed Feb 15 10:14:10 2012] Off-axis axis estimate = 12.12'
[Wed Feb 15 10:17:40 2012] Using EEF radius (= 12.49 ")to estimate initial spatial extent for simple fitting
[Wed Feb 15 10:17:40 2012] Initial guess for spatial extent in simple fitting = 12.49"
[Wed Feb 15 10:17:40 2012] source mask rpix=2.9, npix_max = 45, mask sum = 36, frac = 0.792
[Wed Feb 15 10:17:40 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 12.49"
[Wed Feb 15 18:03:41 2012] fullrun_mos1_xmm0412591501_pi300-10000_cl_pass0_src11.ximg exists
[Wed Feb 15 18:03:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591501_pi300-10000_cl_pass0_src11.csv
[Wed Feb 15 18:03:41 2012] fullrun_mos1_xmm0412591501_pi300-10000_cl_pass0_src11_1.ximg exists
[Wed Feb 15 18:03:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591501_pi300-10000_cl_pass0_src11.csv
[Wed Feb 15 18:03:41 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412591501_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412591501_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Feb 15 18:03:43 2012] fullrun_mos1_xmm0412591501_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Wed Feb 15 18:03:43 2012] fullrun_mos1_xmm0412591501_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Wed Feb 15 18:03:43 2012] Fit fullrun_mos1_xmm0412591501_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Thu Feb 16 00:44:17 2012] Warning, spatial fit 11 centroid is now closest to src. 30
[Thu Feb 16 00:44:17 2012] Warning: source 39 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 16 at 15.417891 pixels away
[Thu Feb 16 00:44:17 2012] Vigneting correction estimate = 1.000000
[Thu Feb 16 00:44:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Feb 16 00:44:17 2012] Assessing source extent using major
[Thu Feb 16 00:44:17 2012] Source does appear to be extended
[Thu Feb 16 00:44:17 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Feb 16 00:44:17 2012] Source is confused with source 15
[Thu Feb 16 00:44:51 2012] Using EEF radius (= 12.49 ")to estimate initial spatial extent for simple fitting
[Thu Feb 16 00:44:51 2012] Initial guess for spatial extent in simple fitting = 12.49"
[Thu Feb 16 00:44:51 2012] source mask rpix=2.9, npix_max = 45, mask sum = 36, frac = 0.792
[Thu Feb 16 00:44:51 2012] Giving source the simple spatial ID 11 for pass 1, mean size = 12.49"
[Thu Feb 16 09:35:07 2012] fullrun_mos1_xmm0412591501_pi300-10000_cl_pass1_src11.ximg exists
[Thu Feb 16 09:35:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591501_pi300-10000_cl_pass1_src11.csv
[Thu Feb 16 09:35:07 2012] fullrun_mos1_xmm0412591501_pi300-10000_cl_pass1_src11_1.ximg exists
[Thu Feb 16 09:35:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591501_pi300-10000_cl_pass1_src11.csv
[Thu Feb 16 09:35:07 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412591501_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412591501_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Feb 16 09:35:09 2012] fullrun_mos1_xmm0412591501_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Thu Feb 16 09:35:09 2012] fullrun_mos1_xmm0412591501_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Thu Feb 16 09:35:09 2012] Fit fullrun_mos1_xmm0412591501_pi300-10000_cl_pass1_tfrozen_src11 appears to have run properly
[Thu Feb 16 19:06:52 2012] Warning, spatial fit 11 centroid is now closest to src. 58
[Thu Feb 16 19:06:52 2012] Warning: source 35 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 16 at 15.417891 pixels away
[Thu Feb 16 19:06:52 2012] Source 16 is offset by -0.006778 and 5.764118 pixels which is larger than
2 X fitted extent = 2.875706 x 2.875706, not incorporating fit results
[Thu Feb 16 19:06:52 2012] Vigneting correction estimate = 1.000000
[Thu Feb 16 19:06:52 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Feb 16 19:06:52 2012] Assessing source extent using major
[Thu Feb 16 19:06:52 2012] Source does appear to be extended
[Thu Feb 16 19:06:52 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Feb 16 19:07:22 2012] XMMSAS src. selection expression = ellipse(27885.732300, 40321.106293, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Feb 16 19:07:22 2012] Writing source region out to fullrun_mos1_xmm0412591501_pi300-10000_pass1_cl_src16_src.reg
[Thu Feb 16 19:07:22 2012] Extracting stamp from image fullrun_mos1_xmm0412591501_pi300-10000_cl_sm2.00.img.gz, (284, 427) - (359, 502)
[Thu Feb 16 19:07:22 2012] XMMSAS bgd. selection expression = annulus(27885.732300, 40321.106293, 1087.500000, 2175.000000, X, Y) && !ellipse(28258.814000, 34447.251000, 9264.936267, 9264.936267, 0.000000, X, Y) && !ellipse(28313.246200, 39645.674000, 1985.776057, 1985.776057, 0.000000, X, Y) && !ellipse(27970.499420, 40841.696472, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27915.816437, 41625.073486, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28421.026031, 40053.211182, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27608.540400, 38507.269200, 822.192024, 822.192024, 0.000000, X, Y) && !ellipse(28006.334960, 42366.849600, 881.760025, 881.760025, 0.000000, X, Y) && !ellipse(27909.780460, 41218.106000, 2033.040059, 2033.040059, 0.000000, X, Y) && !ellipse(28115.764038, 43183.928802, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28465.317230, 40835.481049, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27732.654000, 38404.388000, 1850.888053, 1850.888053, 0.000000, X, Y) && !ellipse(28057.374634, 38062.852539, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27822.093903, 37706.051117, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Feb 16 19:07:22 2012] Writing fullrun_mos1_xmm0412591501_pi300-10000_pass1_cl_src16.gif
[Thu Feb 16 19:20:23 2012] Mean detx,y = (13064.66, -131.39) 
[Thu Feb 16 19:20:24 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Feb 16 19:20:39 2012] Binned source spectrum to 10 counts/bin
[Thu Feb 16 19:20:39 2012] Setting source spectrum file to fullrun_mos1_xmm0412591501_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Thu Feb 16 19:20:39 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0412591501_pi300-10000_pass1_cl_src16_bgd.pi.gz
[Thu Feb 16 20:50:20 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Feb 16 20:50:20 2012] rmf not generated due to insufficient counts
[Fri Feb 17 02:58:53 2012] Updating aperture counts using extracted products
[Fri Feb 17 02:58:53 2012] Error reading totcts from fullrun_mos1_xmm0412591501_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Fri Feb 17 02:58:55 2012] Calculating source flux in energy range 0.30-8.00
[Fri Feb 17 02:58:55 2012] Using photon index=1.80, rate=0.0279, arf fullrun_mos1_xmm0412591501_pi300-10000_pass1_cl_src16.arf
[Fri Feb 17 02:58:55 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Feb 17 02:58:55 2012] Updating source flux to 6.8e-13
[Fri Feb 17 02:59:01 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting