[Wed Mar 28 00:31:48 2012] Detection parameters:
  Position = (393.7, 344.8) = 5 34 6.81 22 2 50.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 822.0 +/- 39.3
  Background counts = 404.4
  Rate = 0.06 +/- 0.003

[Wed Mar 28 00:31:53 2012] Off-axis axis estimate = 7.68'
[Wed Mar 28 10:34:53 2012] Using EEF radius (= 10.27 ")to estimate initial spatial extent for simple fitting
[Wed Mar 28 10:34:53 2012] Initial guess for spatial extent in simple fitting = 10.27"
[Wed Mar 28 10:34:53 2012] source mask rpix=2.4, npix_max = 32, mask sum = 21, frac = 0.642
[Wed Mar 28 10:34:53 2012] Giving source the simple spatial ID 20 for pass 0, mean size = 10.27"
[Thu Mar 29 00:24:06 2012] fullrun_mos2_xmm0412591401_pi300-10000_cl_pass0_src20.ximg exists
[Thu Mar 29 00:24:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591401_pi300-10000_cl_pass0_src20.csv
[Thu Mar 29 00:24:06 2012] fullrun_mos2_xmm0412591401_pi300-10000_cl_pass0_src20_1.ximg exists
[Thu Mar 29 00:24:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591401_pi300-10000_cl_pass0_src20.csv
[Thu Mar 29 00:24:06 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412591401_pi300-10000_cl_pass0_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412591401_pi300-10000_cl_pass0_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 29 00:24:09 2012] fullrun_mos2_xmm0412591401_pi300-10000_cl_pass0_tfrozen_src20.ximg exists
[Thu Mar 29 00:24:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591401_pi300-10000_cl_pass0_tfrozen_src20.csv
[Thu Mar 29 00:24:09 2012] fullrun_mos2_xmm0412591401_pi300-10000_cl_pass0_tfrozen_src20_1.ximg exists
[Thu Mar 29 00:24:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591401_pi300-10000_cl_pass0_tfrozen_src20.csv
[Thu Mar 29 00:24:09 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412591401_pi300-10000_cl_pass0_tfrozen_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412591401_pi300-10000_cl_pass0_tfrozen_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 29 00:25:25 2012] Warning, spatial fit 20 centroid is now closest to src. 92
[Thu Mar 29 00:25:26 2012] Spatial fit model total counts = 7814.010000, observed total counts = 7929.000000
[Thu Mar 29 00:25:26 2012] Offset between fit and detection position for source 85 = 4.586777 pixels
[Thu Mar 29 00:25:26 2012] Warning, changing simple spatial fit ID from 20 to 84
[Thu Mar 29 00:25:26 2012] 7484.316000 total counts/ 7048.900000 bgd. counts: snr = 5.186134
Spatial fit parameters:
  Offset between fit and detection position for source 85 = 4.586777 pixels
  Position = (398.2, 345.5) = 5 34 5.40 22 2 57.5
  Extent = 20.9 (16.9-41.9)" x 6.2 (4.8-8.4)", rotation angle = 358 (349-5) degrees
  Source counts = 435.4 +/- 86.5
  Background counts = 7048.9
  Rate = 0.02 +/- 0.004
[Thu Mar 29 00:25:26 2012] Vigneting correction estimate = 1.000000
[Thu Mar 29 00:25:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar 29 00:25:26 2012] Assessing source extent using major axis lower bound
[Thu Mar 29 00:25:26 2012] Source does appear to be extended
[Thu Mar 29 00:25:26 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 2.00
[Thu Mar 29 00:25:26 2012] Source is asymmetric
[Thu Mar 29 00:25:26 2012] Source is confused with source 92
[Thu Mar 29 00:25:26 2012] Source is confused with source 84
[Thu Mar 29 00:25:26 2012] Source is confused with source 75
[Thu Mar 29 00:25:26 2012] Source is confused with source 83
[Thu Mar 29 00:25:26 2012] Source is confused with source 88
[Thu Mar 29 00:25:26 2012] Source is confused with source 91
[Thu Mar 29 00:25:26 2012] Source is confused with source 158
[Thu Mar 29 11:04:59 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Mar 29 11:04:59 2012] Initial guess for spatial extent in simple fitting = 13.55"
[Thu Mar 29 11:04:59 2012] source mask rpix=3.1, npix_max = 52, mask sum = 47, frac = 0.899
[Thu Mar 29 11:04:59 2012] Giving source the simple spatial ID 20 for pass 1, mean size = 13.55"
[Fri Mar 30 21:00:05 2012] fullrun_mos2_xmm0412591401_pi300-10000_cl_pass1_src20.ximg exists
[Fri Mar 30 21:00:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591401_pi300-10000_cl_pass1_src20.csv
[Fri Mar 30 21:00:05 2012] fullrun_mos2_xmm0412591401_pi300-10000_cl_pass1_src20_1.ximg exists
[Fri Mar 30 21:00:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591401_pi300-10000_cl_pass1_src20.csv
[Fri Mar 30 21:00:05 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412591401_pi300-10000_cl_pass1_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412591401_pi300-10000_cl_pass1_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 30 21:00:08 2012] fullrun_mos2_xmm0412591401_pi300-10000_cl_pass1_tfrozen_src20.ximg exists
[Fri Mar 30 21:00:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591401_pi300-10000_cl_pass1_tfrozen_src20.csv
[Fri Mar 30 21:00:08 2012] fullrun_mos2_xmm0412591401_pi300-10000_cl_pass1_tfrozen_src20_1.ximg exists
[Fri Mar 30 21:00:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591401_pi300-10000_cl_pass1_tfrozen_src20.csv
[Fri Mar 30 21:00:08 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412591401_pi300-10000_cl_pass1_tfrozen_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412591401_pi300-10000_cl_pass1_tfrozen_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 30 21:01:42 2012] Warning, spatial fit 20 centroid is now closest to src. 84
[Fri Mar 30 21:01:43 2012] Spatial fit model total counts = 7315.390000, observed total counts = 4996.000000
[Fri Mar 30 21:01:43 2012] Poor agreement between spatial fit and data for source 85
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Mar 30 21:01:44 2012] Vigneting correction estimate = 1.000000
[Fri Mar 30 21:01:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 30 21:01:44 2012] Assessing source extent using major axis lower bound
[Fri Mar 30 21:01:44 2012] Source does appear to be extended
[Fri Mar 30 21:01:44 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 2.00
[Fri Mar 30 21:01:44 2012] Source is asymmetric
[Sat Mar 31 03:06:23 2012] XMMSAS src. selection expression = ellipse(34594.610000, 30011.498000, 1256.910036, 369.297611, 357.935840, X, Y)
[Sat Mar 31 03:06:23 2012] Writing source region out to fullrun_mos2_xmm0412591401_pi300-10000_pass1_cl_src85_src.reg
[Sat Mar 31 03:06:23 2012] Extracting stamp from image fullrun_mos2_xmm0412591401_pi300-10000_cl_sm2.00.img.gz, (326, 273) - (470, 418)
[Sat Mar 31 03:06:23 2012] XMMSAS bgd. selection expression = annulus(34594.610000, 30011.498000, 2094.850060, 4189.700121, X, Y) && !ellipse(30113.004517, 34244.798279, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29598.252747, 34314.936188, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30711.884000, 34238.080000, 1765.632051, 428.373612, 0.000000, X, Y) && !ellipse(31565.594940, 34158.570892, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35595.087769, 30914.557861, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34509.637451, 25007.184052, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34314.745026, 32125.545929, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32758.546600, 34135.681800, 1740.336050, 389.460011, 359.965000, X, Y) && !ellipse(34162.752563, 26654.589905, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31095.224640, 34720.178619, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34047.272064, 25879.055847, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34222.241150, 29184.511566, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34011.434000, 25391.690000, 1604.064046, 1604.064046, 0.000000, X, Y) && !ellipse(34243.988495, 30378.472931, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34242.552000, 30965.696000, 1727.024050, 1727.024050, 0.000000, X, Y) && !ellipse(32205.595062, 34209.292572, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34126.899400, 31185.820572, 1650.528047, 1650.528047, 0.000000, X, Y) && !ellipse(35277.228000, 30366.250000, 1754.856050, 245.900807, 1.338000, X, Y) && !ellipse(34964.980286, 29434.610016, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34816.439362, 31441.392670, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35395.016000, 29069.870000, 1022.176029, 1022.176029, 0.000000, X, Y) && !ellipse(32785.195923, 34753.177979, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32027.790405, 34560.016632, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35271.806091, 27098.213440, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35003.199432, 32915.693268, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34974.732000, 25231.754000, 741.628021, 741.628021, 0.000000, X, Y) && !ellipse(35455.032318, 31619.961975, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33302.950531, 34997.873444, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35598.305664, 28476.478973, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32017.634918, 34972.273651, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35569.121582, 30136.798889, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35502.687439, 26485.631805, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33153.676000, 33692.094000, 2128.200061, 2128.200061, 0.000000, X, Y) && !ellipse(34099.002655, 32555.371277, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34191.933990, 32998.806305, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Mar 31 03:06:23 2012] Writing fullrun_mos2_xmm0412591401_pi300-10000_pass1_cl_src85.gif
[Sat Mar 31 03:40:42 2012] Mean detx,y = (-7415.69, 2961.64) 
[Sat Mar 31 03:40:44 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Mar 31 03:41:17 2012] Binned source spectrum to 10 counts/bin
[Sat Mar 31 03:41:17 2012] Setting source spectrum file to fullrun_mos2_xmm0412591401_pi300-10000_pass1_cl_src85_src_b10.pi.gz
[Sat Mar 31 03:41:17 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0412591401_pi300-10000_pass1_cl_src85_bgd.pi.gz
[Sat Mar 31 11:26:48 2012] Updating aperture counts using extracted products
[Sat Mar 31 11:26:48 2012] Error reading totcts from fullrun_mos2_xmm0412591401_pi300-10000_pass1_cl_src85_src_b10.pi.gz
[Sat Mar 31 11:26:58 2012] Calculating source flux in energy range 0.30-8.00
[Sat Mar 31 11:26:58 2012] Using photon index=1.80, rate=0.0199, arf fullrun_mos2_xmm0412591401_pi300-10000_pass1_cl_src85.arf
[Sat Mar 31 11:26:58 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Mar 31 11:26:58 2012] Updating source flux to 3.9e-13
[Sat Mar 31 11:37:36 2012] Flag p found in src. 85 procflags, skipping spectral fitting
[Sat Mar 31 11:37:36 2012] Flag c found in src. 85 procflags, skipping spectral fitting