[Wed Mar 28 00:31:48 2012] Detection parameters:
  Position = (404.9, 349.3) = 5 34 3.30 22 3 21.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 363.6 +/- 32.4
  Background counts = 492.6
  Rate = 0.03 +/- 0.003

[Wed Mar 28 00:31:53 2012] Off-axis axis estimate = 8.55'
[Wed Mar 28 10:34:54 2012] Using EEF radius (= 10.71 ")to estimate initial spatial extent for simple fitting
[Wed Mar 28 10:34:54 2012] Initial guess for spatial extent in simple fitting = 10.71"
[Wed Mar 28 10:34:54 2012] source mask rpix=2.5, npix_max = 35, mask sum = 31, frac = 0.884
[Wed Mar 28 10:34:54 2012] Giving source the simple spatial ID 83 for pass 0, mean size = 10.71"
[Thu Mar 29 00:24:08 2012] fullrun_mos2_xmm0412591401_pi300-10000_cl_pass0_src83.ximg exists
[Thu Mar 29 00:24:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591401_pi300-10000_cl_pass0_src83.csv
[Thu Mar 29 00:24:08 2012] fullrun_mos2_xmm0412591401_pi300-10000_cl_pass0_src83_1.ximg exists
[Thu Mar 29 00:24:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591401_pi300-10000_cl_pass0_src83.csv
[Thu Mar 29 00:24:08 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412591401_pi300-10000_cl_pass0_src83_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412591401_pi300-10000_cl_pass0_src83.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 29 00:24:11 2012] fullrun_mos2_xmm0412591401_pi300-10000_cl_pass0_tfrozen_src83.ximg exists
[Thu Mar 29 00:24:11 2012] fullrun_mos2_xmm0412591401_pi300-10000_cl_pass0_tfrozen_src83_1.ximg exists
[Thu Mar 29 00:24:11 2012] Fit fullrun_mos2_xmm0412591401_pi300-10000_cl_pass0_tfrozen_src83 appears to have run properly
[Thu Mar 29 00:25:26 2012] Warning, spatial fit 83 centroid is now closest to src. 158
[Thu Mar 29 00:25:26 2012] Vigneting correction estimate = 1.000000
[Thu Mar 29 00:25:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar 29 00:25:26 2012] Assessing source extent using major
[Thu Mar 29 00:25:26 2012] Source does appear to be extended
[Thu Mar 29 00:25:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar 29 00:25:26 2012] Source is confused with source 85
[Thu Mar 29 11:04:59 2012] Using EEF radius (= 10.71 ")to estimate initial spatial extent for simple fitting
[Thu Mar 29 11:04:59 2012] Initial guess for spatial extent in simple fitting = 10.71"
[Thu Mar 29 11:04:59 2012] source mask rpix=2.5, npix_max = 35, mask sum = 31, frac = 0.884
[Thu Mar 29 11:04:59 2012] Giving source the simple spatial ID 82 for pass 1, mean size = 10.71"
[Fri Mar 30 21:00:07 2012] fullrun_mos2_xmm0412591401_pi300-10000_cl_pass1_src82.ximg exists
[Fri Mar 30 21:00:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591401_pi300-10000_cl_pass1_src82.csv
[Fri Mar 30 21:00:07 2012] fullrun_mos2_xmm0412591401_pi300-10000_cl_pass1_src82_1.ximg exists
[Fri Mar 30 21:00:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591401_pi300-10000_cl_pass1_src82.csv
[Fri Mar 30 21:00:07 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412591401_pi300-10000_cl_pass1_src82_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412591401_pi300-10000_cl_pass1_src82.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 30 21:00:10 2012] fullrun_mos2_xmm0412591401_pi300-10000_cl_pass1_tfrozen_src82.ximg exists
[Fri Mar 30 21:00:10 2012] fullrun_mos2_xmm0412591401_pi300-10000_cl_pass1_tfrozen_src82_1.ximg exists
[Fri Mar 30 21:00:10 2012] Fit fullrun_mos2_xmm0412591401_pi300-10000_cl_pass1_tfrozen_src82 appears to have run properly
[Fri Mar 30 21:01:43 2012] Spatial fit model total counts = 5759.920000, observed total counts = 5767.000000
[Fri Mar 30 21:01:43 2012] Offset between fit and detection position for source 83 = 1.187051 pixels
[Fri Mar 30 21:01:43 2012] Warning, changing simple spatial fit ID from 82 to 28
[Fri Mar 30 21:01:43 2012] 5673.930000 total counts/ 5429.550000 bgd. counts: snr = 3.316529
Spatial fit parameters:
  Offset between fit and detection position for source 83 = 1.187051 pixels
  Position = (406.0, 349.6) = 5 34 2.94 22 3 15.2
  Extent = 21.9 (19.2-43.9)" x 3.1 (2.7-4.2)", rotation angle = 1
  Source counts = 244.4 +/- 75.3
  Background counts = 5429.6
  Rate = 0.01 +/- 0.003
[Fri Mar 30 21:01:44 2012] Vigneting correction estimate = 1.000000
[Fri Mar 30 21:01:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 30 21:01:44 2012] Assessing source extent using major axis lower bound
[Fri Mar 30 21:01:44 2012] Source does appear to be extended
[Fri Mar 30 21:01:44 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 4.57
[Fri Mar 30 21:01:44 2012] Source is asymmetric
[Sat Mar 31 03:06:29 2012] XMMSAS src. selection expression = ellipse(35277.228000, 30366.250000, 1316.142038, 184.425605, 1.338000, X, Y)
[Sat Mar 31 03:06:29 2012] Writing source region out to fullrun_mos2_xmm0412591401_pi300-10000_pass1_cl_src83_src.reg
[Sat Mar 31 03:06:29 2012] Extracting stamp from image fullrun_mos2_xmm0412591401_pi300-10000_cl_sm2.00.img.gz, (330, 274) - (482, 425)
[Sat Mar 31 03:06:29 2012] XMMSAS bgd. selection expression = annulus(35277.228000, 30366.250000, 2193.570063, 4387.140126, X, Y) && !ellipse(30113.004517, 34244.798279, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30711.884000, 34238.080000, 1765.632051, 428.373612, 0.000000, X, Y) && !ellipse(34594.610000, 30011.498000, 1675.880048, 492.396814, 357.935840, X, Y) && !ellipse(31565.594940, 34158.570892, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35595.087769, 30914.557861, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34314.745026, 32125.545929, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32758.546600, 34135.681800, 1740.336050, 389.460011, 359.965000, X, Y) && !ellipse(34162.752563, 26654.589905, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31095.224640, 34720.178619, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34047.272064, 25879.055847, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34222.241150, 29184.511566, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34011.434000, 25391.690000, 1604.064046, 1604.064046, 0.000000, X, Y) && !ellipse(34243.988495, 30378.472931, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34242.552000, 30965.696000, 1727.024050, 1727.024050, 0.000000, X, Y) && !ellipse(32205.595062, 34209.292572, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34126.899400, 31185.820572, 1650.528047, 1650.528047, 0.000000, X, Y) && !ellipse(34964.980286, 29434.610016, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34816.439362, 31441.392670, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35395.016000, 29069.870000, 1022.176029, 1022.176029, 0.000000, X, Y) && !ellipse(32785.195923, 34753.177979, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32027.790405, 34560.016632, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35271.806091, 27098.213440, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30030.061401, 35448.604492, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35003.199432, 32915.693268, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35455.032318, 31619.961975, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33302.950531, 34997.873444, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35598.305664, 28476.478973, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32017.634918, 34972.273651, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35569.121582, 30136.798889, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35502.687439, 26485.631805, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33153.676000, 33692.094000, 2128.200061, 2128.200061, 0.000000, X, Y) && !ellipse(34099.002655, 32555.371277, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34191.933990, 32998.806305, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32178.404907, 35349.271881, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Mar 31 03:06:29 2012] Writing fullrun_mos2_xmm0412591401_pi300-10000_pass1_cl_src83.gif
[Sat Mar 31 05:22:56 2012] Mean detx,y = (-7781.52, 3321.89) 
[Sat Mar 31 05:22:59 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Mar 31 05:23:34 2012] Binned source spectrum to 10 counts/bin
[Sat Mar 31 05:23:34 2012] Setting source spectrum file to fullrun_mos2_xmm0412591401_pi300-10000_pass1_cl_src83_src_b10.pi.gz
[Sat Mar 31 05:23:34 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0412591401_pi300-10000_pass1_cl_src83_bgd.pi.gz
[Sat Mar 31 11:26:51 2012] Updating aperture counts using extracted products
[Sat Mar 31 11:26:51 2012] Error reading totcts from fullrun_mos2_xmm0412591401_pi300-10000_pass1_cl_src83_src_b10.pi.gz
[Sat Mar 31 11:27:01 2012] Calculating source flux in energy range 0.30-8.00
[Sat Mar 31 11:27:01 2012] Using photon index=1.80, rate=0.0112, arf fullrun_mos2_xmm0412591401_pi300-10000_pass1_cl_src83.arf
[Sat Mar 31 11:27:01 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Mar 31 11:27:01 2012] Updating source flux to 2.2e-13
[Sat Mar 31 11:37:36 2012] Flag c found in src. 83 procflags, skipping spectral fitting