[Wed Mar 28 00:31:47 2012] Detection parameters:
  Position = (394.1, 358.0) = 5 34 6.66 22 3 57.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 412.5 +/- 34.0
  Background counts = 453.4
  Rate = 0.03 +/- 0.003

[Wed Mar 28 00:31:53 2012] Off-axis axis estimate = 8.17'
[Wed Mar 28 10:34:54 2012] Using EEF radius (= 10.51 ")to estimate initial spatial extent for simple fitting
[Wed Mar 28 10:34:54 2012] Initial guess for spatial extent in simple fitting = 10.51"
[Wed Mar 28 10:34:54 2012] source mask rpix=2.4, npix_max = 34, mask sum = 22, frac = 0.646
[Wed Mar 28 10:34:54 2012] Giving source the simple spatial ID 74 for pass 0, mean size = 10.51"
[Thu Mar 29 00:24:08 2012] fullrun_mos2_xmm0412591401_pi300-10000_cl_pass0_src74.ximg exists
[Thu Mar 29 00:24:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591401_pi300-10000_cl_pass0_src74.csv
[Thu Mar 29 00:24:08 2012] fullrun_mos2_xmm0412591401_pi300-10000_cl_pass0_src74_1.ximg exists
[Thu Mar 29 00:24:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591401_pi300-10000_cl_pass0_src74.csv
[Thu Mar 29 00:24:08 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412591401_pi300-10000_cl_pass0_src74_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412591401_pi300-10000_cl_pass0_src74.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 29 00:24:11 2012] fullrun_mos2_xmm0412591401_pi300-10000_cl_pass0_tfrozen_src74.ximg exists
[Thu Mar 29 00:24:11 2012] fullrun_mos2_xmm0412591401_pi300-10000_cl_pass0_tfrozen_src74_1.ximg exists
[Thu Mar 29 00:24:11 2012] Fit fullrun_mos2_xmm0412591401_pi300-10000_cl_pass0_tfrozen_src74 appears to have run properly
[Thu Mar 29 00:25:26 2012] Spatial fit model total counts = 4471.630000, observed total counts = 4182.000000
[Thu Mar 29 00:25:26 2012] Offset between fit and detection position for source 78 = 1.693484 pixels
[Thu Mar 29 00:25:26 2012] 4412.596490 total counts/ 1.396490 bgd. counts: snr = 3732.826750
Spatial fit parameters:
  Offset between fit and detection position for source 78 = 1.693484 pixels
  Position = (392.8, 359.0) = 5 34 7.08 22 3 56.3
  Extent = 20.6 (19.8-21.0)", rotation angle = 0
  Source counts = 4411.2 +/- 66.4
  Background counts = 1.4
  Rate = 0.2 +/- 0.003
[Thu Mar 29 00:25:26 2012] Vigneting correction estimate = 1.000000
[Thu Mar 29 00:25:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar 29 00:25:26 2012] Assessing source extent using major axis lower bound
[Thu Mar 29 00:25:26 2012] Source does appear to be extended
[Thu Mar 29 00:25:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar 29 00:25:26 2012] Source is confused with source 74
[Thu Mar 29 11:04:59 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Mar 29 11:04:59 2012] Initial guess for spatial extent in simple fitting = 20.63"
[Thu Mar 29 11:04:59 2012] source mask rpix=4.7, npix_max = 109, mask sum = 43, frac = 0.391
[Thu Mar 29 11:04:59 2012] Skipping simple spatial due to low active detector fraction
[Fri Mar 30 21:01:44 2012] Vigneting correction estimate = 1.000000
[Fri Mar 30 21:01:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 30 21:01:44 2012] Assessing source extent using major axis lower bound
[Fri Mar 30 21:01:44 2012] Source does appear to be extended
[Fri Mar 30 21:01:44 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Mar 31 03:06:28 2012] Counts = 4411.200000, rescaling region sizes by 2.000000
[Sat Mar 31 03:06:28 2012] XMMSAS src. selection expression = ellipse(34126.899400, 31185.820572, 2475.792071, 2475.792071, 0.000000, X, Y)
[Sat Mar 31 03:06:28 2012] Writing source region out to fullrun_mos2_xmm0412591401_pi300-10000_pass1_cl_src78_src.reg
[Sat Mar 31 03:06:28 2012] Extracting stamp from image fullrun_mos2_xmm0412591401_pi300-10000_cl_sm2.00.img.gz, (251, 217) - (535, 501)
[Sat Mar 31 03:06:28 2012] XMMSAS bgd. selection expression = annulus(34126.899400, 31185.820572, 8252.640237, 16505.280475, X, Y) && !ellipse(24752.949066, 35182.918365, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(30184.695618, 19088.171921, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27894.900116, 34447.310638, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27143.029200, 34780.574000, 1063.080031, 1063.080031, 0.000000, X, Y) && !ellipse(27920.172000, 35925.192000, 1724.160050, 442.086413, 90.025000, X, Y) && !ellipse(28024.578200, 35096.256680, 856.416025, 503.164014, 1.396950, X, Y) && !ellipse(24209.748657, 35236.510132, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27235.646200, 35028.640200, 531.540015, 531.540015, 0.000000, X, Y) && !ellipse(27942.074677, 36385.760803, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25893.223083, 34395.192413, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26071.946000, 18569.752000, 1494.272043, 1494.272043, 0.000000, X, Y) && !ellipse(25002.657227, 34448.051392, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30113.004517, 34244.798279, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29598.252747, 34314.936188, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27183.632800, 35845.671800, 809.576023, 809.576023, 0.000000, X, Y) && !ellipse(30711.884000, 34238.080000, 1765.632051, 428.373612, 0.000000, X, Y) && !ellipse(34594.610000, 30011.498000, 1675.880048, 492.396814, 357.935840, X, Y) && !ellipse(27082.561400, 19369.402600, 548.219216, 548.219216, 0.000000, X, Y) && !ellipse(28108.826000, 36990.346000, 677.118419, 677.118419, 0.000000, X, Y) && !ellipse(28093.321075, 38754.729279, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27247.576800, 36553.846000, 814.320023, 814.320023, 0.000000, X, Y) && !ellipse(28154.057526, 39535.844208, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31565.594940, 34158.570892, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28210.922800, 37827.455400, 986.048028, 986.048028, 0.000000, X, Y) && !ellipse(35595.087769, 30914.557861, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34509.637451, 25007.184052, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20133.561829, 28758.984711, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34314.745026, 32125.545929, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28246.845490, 42400.363281, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28263.978400, 41162.836000, 613.126418, 613.126418, 0.000000, X, Y) && !ellipse(28180.493652, 40566.776154, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32758.546600, 34135.681800, 1740.336050, 389.460011, 359.965000, X, Y) && !ellipse(28031.477478, 37711.247009, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26786.651062, 19385.187393, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26417.299316, 35091.747314, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28744.950226, 20228.678253, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25728.799774, 35182.289124, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34162.752563, 26654.589905, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31095.224640, 34720.178619, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27607.537000, 20264.568000, 961.440028, 961.440028, 0.000000, X, Y) && !ellipse(34047.272064, 25879.055847, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25023.541687, 35182.233368, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27363.943000, 19419.678000, 869.344025, 869.344025, 0.000000, X, Y) && !ellipse(34222.241150, 29184.511566, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28993.360077, 35698.163971, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27201.366638, 20269.881653, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34011.434000, 25391.690000, 1604.064046, 1604.064046, 0.000000, X, Y) && !ellipse(28308.521820, 43358.916473, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27218.650879, 18563.319092, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29196.100474, 19993.140592, 1433.944041, 516.825306, 0.000000, X, Y) && !ellipse(25421.241180, 20399.840027, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34243.988495, 30378.472931, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27719.528800, 41969.554000, 2146.520062, 2146.520062, 0.000000, X, Y) && !ellipse(29392.056000, 19123.728000, 1516.920044, 1516.920044, 0.000000, X, Y) && !ellipse(19582.420227, 30837.171722, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26698.344788, 18596.005157, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28388.020200, 19155.411400, 1503.272043, 1503.272043, 0.000000, X, Y) && !ellipse(27436.210200, 40190.696858, 697.080820, 697.080820, 0.000000, X, Y) && !ellipse(29804.087400, 35047.984600, 741.655221, 741.655221, 0.000000, X, Y) && !ellipse(23984.652618, 34525.665863, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27631.545105, 39187.918549, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23589.159454, 35272.358337, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27673.714000, 19265.695000, 1498.696043, 1498.696043, 0.000000, X, Y) && !ellipse(27281.821400, 37428.802000, 659.837619, 659.837619, 0.000000, X, Y) && !ellipse(27808.396606, 41455.709167, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34242.552000, 30965.696000, 1727.024050, 1727.024050, 0.000000, X, Y) && !ellipse(32205.595062, 34209.292572, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33979.104187, 24052.162048, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19464.791809, 29287.298370, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28191.388000, 19188.462000, 1539.240044, 352.554410, 2.009000, X, Y) && !ellipse(27523.719055, 38060.951538, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29378.793335, 35695.386810, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27697.153534, 40927.167175, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28309.772339, 44023.834045, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20223.796982, 29964.097198, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25198.237305, 19531.304276, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35277.228000, 30366.250000, 1754.856050, 245.900807, 1.338000, X, Y) && !ellipse(34964.980286, 29434.610016, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28959.262000, 18287.870000, 1541.168044, 581.323217, 0.047000, X, Y) && !ellipse(33876.097015, 22571.377869, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20301.432693, 32233.624207, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34374.950470, 23620.557831, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27520.525055, 38575.581177, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27457.797000, 17853.804000, 2992.592086, 2992.592086, 0.000000, X, Y) && !ellipse(29858.290000, 19230.603200, 1565.384045, 510.788815, 15.133000, X, Y) && !ellipse(27797.112732, 42578.887451, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34816.439362, 31441.392670, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26612.852844, 18988.172897, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27759.074127, 43364.523895, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19891.905045, 26746.145935, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35395.016000, 29069.870000, 1022.176029, 1022.176029, 0.000000, X, Y) && !ellipse(34652.002777, 24399.713348, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19626.458600, 29677.672000, 1360.072039, 1360.072039, 0.000000, X, Y) && !ellipse(20247.011230, 33459.360962, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20565.698000, 34362.326000, 1657.648048, 1657.648048, 0.000000, X, Y) && !ellipse(28976.805969, 18862.194412, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22827.163391, 35151.464233, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32785.195923, 34753.177979, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31374.533722, 20013.980637, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24392.292542, 20323.511917, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32027.790405, 34560.016632, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32967.997345, 20048.801346, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35271.806091, 27098.213440, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33893.333466, 21529.404984, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26315.399292, 17871.563156, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30670.712006, 20141.715424, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30030.061401, 35448.604492, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20526.998672, 31529.932587, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26076.951111, 35709.766449, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35003.199432, 32915.693268, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20393.860901, 28130.164917, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19965.320587, 32861.612976, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19885.968399, 25273.634827, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19845.142014, 24486.118622, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34974.732000, 25231.754000, 741.628021, 741.628021, 0.000000, X, Y) && !ellipse(20221.210983, 25806.658508, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26896.375458, 15526.219131, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20695.279739, 30832.113892, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19054.321625, 32231.210785, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20397.895218, 27610.867737, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19814.452530, 23343.051514, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35455.032318, 31619.961975, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30845.168671, 19173.324020, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33302.950531, 34997.873444, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35598.305664, 28476.478973, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23866.246277, 20496.951706, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19537.255524, 32901.111847, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26522.061462, 16933.923630, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34578.623077, 22320.318298, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32017.634918, 34972.273651, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32186.736389, 19537.413498, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19237.464218, 26998.687012, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30587.758270, 35960.682648, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26531.300964, 14653.822968, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27354.715820, 16659.420151, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26996.863007, 17176.581360, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34369.435974, 21261.420929, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35569.121582, 30136.798889, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27947.267914, 18054.145538, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29227.002655, 36338.172058, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31652.509979, 19450.886093, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19758.789841, 23873.887451, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32642.939453, 19616.663467, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33479.313507, 19623.429810, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35502.687439, 26485.631805, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33153.676000, 33692.094000, 2128.200061, 2128.200061, 0.000000, X, Y) && !ellipse(34529.627167, 21805.449707, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26528.303436, 16573.178162, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23159.602264, 20576.181763, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34099.002655, 32555.371277, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22789.870850, 20571.175705, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28700.954000, 18024.964000, 1569.944045, 1569.944045, 0.000000, X, Y) && !ellipse(34191.933990, 32998.806305, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21423.979080, 34803.326172, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32178.404907, 35349.271881, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26842.783691, 14039.025711, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Mar 31 03:06:28 2012] Writing fullrun_mos2_xmm0412591401_pi300-10000_pass1_cl_src78.gif
[Sat Mar 31 05:11:51 2012] Mean detx,y = (-7629.90, 3885.18) 
[Sat Mar 31 05:11:56 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Mar 31 05:17:14 2012] Binned source spectrum to 10 counts/bin
[Sat Mar 31 05:17:14 2012] Setting source spectrum file to fullrun_mos2_xmm0412591401_pi300-10000_pass1_cl_src78_src_b10.pi.gz
[Sat Mar 31 05:17:14 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0412591401_pi300-10000_pass1_cl_src78_bgd.pi.gz
[Sat Mar 31 11:26:51 2012] Updating aperture counts using extracted products
[Sat Mar 31 11:26:51 2012] Error reading totcts from fullrun_mos2_xmm0412591401_pi300-10000_pass1_cl_src78_src_b10.pi.gz
[Sat Mar 31 11:27:01 2012] Calculating source flux in energy range 0.30-8.00
[Sat Mar 31 11:27:01 2012] Using photon index=1.80, rate=0.202, arf fullrun_mos2_xmm0412591401_pi300-10000_pass1_cl_src78.arf
[Sat Mar 31 11:27:01 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Mar 31 11:27:01 2012] Updating source flux to 4.5e-12
[Sat Mar 31 11:37:36 2012] Flag c found in src. 78 procflags, skipping spectral fitting