[Wed Mar 28 00:31:46 2012] Detection parameters:
  Position = (370.7, 393.8) = 5 34 13.98 22 6 28.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 413.2 +/- 36.4
  Background counts = 388.7
  Rate = 0.03 +/- 0.003

[Wed Mar 28 00:31:53 2012] Off-axis axis estimate = 8.67'
[Wed Mar 28 10:34:54 2012] Using EEF radius (= 10.77 ")to estimate initial spatial extent for simple fitting
[Wed Mar 28 10:34:54 2012] Initial guess for spatial extent in simple fitting = 10.77"
[Wed Mar 28 10:34:54 2012] source mask rpix=2.5, npix_max = 35, mask sum = 35, frac = 0.989
[Wed Mar 28 10:34:54 2012] Giving source the simple spatial ID 71 for pass 0, mean size = 10.77"
[Thu Mar 29 00:24:07 2012] fullrun_mos2_xmm0412591401_pi300-10000_cl_pass0_src71.ximg exists
[Thu Mar 29 00:24:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591401_pi300-10000_cl_pass0_src71.csv
[Thu Mar 29 00:24:07 2012] fullrun_mos2_xmm0412591401_pi300-10000_cl_pass0_src71_1.ximg exists
[Thu Mar 29 00:24:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591401_pi300-10000_cl_pass0_src71.csv
[Thu Mar 29 00:24:07 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412591401_pi300-10000_cl_pass0_src71_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412591401_pi300-10000_cl_pass0_src71.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 29 00:24:11 2012] fullrun_mos2_xmm0412591401_pi300-10000_cl_pass0_tfrozen_src71.ximg exists
[Thu Mar 29 00:24:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591401_pi300-10000_cl_pass0_tfrozen_src71.csv
[Thu Mar 29 00:24:11 2012] fullrun_mos2_xmm0412591401_pi300-10000_cl_pass0_tfrozen_src71_1.ximg exists
[Thu Mar 29 00:24:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591401_pi300-10000_cl_pass0_tfrozen_src71.csv
[Thu Mar 29 00:24:11 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412591401_pi300-10000_cl_pass0_tfrozen_src71_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412591401_pi300-10000_cl_pass0_tfrozen_src71.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 29 00:25:25 2012] Source 61 is offset by -2.003574 and 9.508030 pixels which is larger than
2 X fitted extent = 1.217536 x 1.217536, not incorporating fit results
[Thu Mar 29 00:25:26 2012] Warning, spatial fit 71 centroid is now closest to src. 47
[Thu Mar 29 00:25:26 2012] Vigneting correction estimate = 1.000000
[Thu Mar 29 00:25:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar 29 00:25:26 2012] Assessing source extent using major
[Thu Mar 29 00:25:26 2012] Source does appear to be extended
[Thu Mar 29 00:25:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar 29 00:25:26 2012] Source is confused with source 62
[Thu Mar 29 11:04:59 2012] Using EEF radius (= 10.77 ")to estimate initial spatial extent for simple fitting
[Thu Mar 29 11:04:59 2012] Initial guess for spatial extent in simple fitting = 10.77"
[Thu Mar 29 11:04:59 2012] source mask rpix=2.5, npix_max = 35, mask sum = 35, frac = 0.989
[Thu Mar 29 11:04:59 2012] Giving source the simple spatial ID 71 for pass 1, mean size = 10.77"
[Fri Mar 30 21:00:07 2012] fullrun_mos2_xmm0412591401_pi300-10000_cl_pass1_src71.ximg exists
[Fri Mar 30 21:00:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591401_pi300-10000_cl_pass1_src71.csv
[Fri Mar 30 21:00:07 2012] fullrun_mos2_xmm0412591401_pi300-10000_cl_pass1_src71_1.ximg exists
[Fri Mar 30 21:00:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591401_pi300-10000_cl_pass1_src71.csv
[Fri Mar 30 21:00:07 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412591401_pi300-10000_cl_pass1_src71_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412591401_pi300-10000_cl_pass1_src71.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 30 21:00:10 2012] fullrun_mos2_xmm0412591401_pi300-10000_cl_pass1_tfrozen_src71.ximg exists
[Fri Mar 30 21:00:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591401_pi300-10000_cl_pass1_tfrozen_src71.csv
[Fri Mar 30 21:00:10 2012] fullrun_mos2_xmm0412591401_pi300-10000_cl_pass1_tfrozen_src71_1.ximg exists
[Fri Mar 30 21:00:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591401_pi300-10000_cl_pass1_tfrozen_src71.csv
[Fri Mar 30 21:00:10 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412591401_pi300-10000_cl_pass1_tfrozen_src71_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412591401_pi300-10000_cl_pass1_tfrozen_src71.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 30 21:01:43 2012] Warning, spatial fit 71 centroid is now closest to src. 154
[Fri Mar 30 21:01:44 2012] Vigneting correction estimate = 1.000000
[Fri Mar 30 21:01:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 30 21:01:44 2012] Assessing source extent using major
[Fri Mar 30 21:01:44 2012] Source does appear to be extended
[Fri Mar 30 21:01:44 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Mar 31 03:06:28 2012] XMMSAS src. selection expression = ellipse(32205.595062, 34209.292572, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Mar 31 03:06:28 2012] Writing source region out to fullrun_mos2_xmm0412591401_pi300-10000_pass1_cl_src61_src.reg
[Sat Mar 31 03:06:28 2012] Extracting stamp from image fullrun_mos2_xmm0412591401_pi300-10000_cl_sm2.00.img.gz, (333, 356) - (408, 431)
[Sat Mar 31 03:06:28 2012] XMMSAS bgd. selection expression = annulus(32205.595062, 34209.292572, 1087.500000, 2175.000000, X, Y) && !ellipse(30113.004517, 34244.798279, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29598.252747, 34314.936188, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30711.884000, 34238.080000, 1765.632051, 428.373612, 0.000000, X, Y) && !ellipse(31565.594940, 34158.570892, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34314.745026, 32125.545929, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32758.546600, 34135.681800, 1740.336050, 389.460011, 359.965000, X, Y) && !ellipse(31095.224640, 34720.178619, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29804.087400, 35047.984600, 741.655221, 741.655221, 0.000000, X, Y) && !ellipse(34242.552000, 30965.696000, 1727.024050, 1727.024050, 0.000000, X, Y) && !ellipse(34126.899400, 31185.820572, 1650.528047, 1650.528047, 0.000000, X, Y) && !ellipse(29378.793335, 35695.386810, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35277.228000, 30366.250000, 1754.856050, 245.900807, 1.338000, X, Y) && !ellipse(34816.439362, 31441.392670, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32785.195923, 34753.177979, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32027.790405, 34560.016632, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30030.061401, 35448.604492, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35003.199432, 32915.693268, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33302.950531, 34997.873444, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32017.634918, 34972.273651, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30587.758270, 35960.682648, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29227.002655, 36338.172058, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33153.676000, 33692.094000, 2128.200061, 2128.200061, 0.000000, X, Y) && !ellipse(34099.002655, 32555.371277, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34191.933990, 32998.806305, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32178.404907, 35349.271881, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Mar 31 03:06:28 2012] Writing fullrun_mos2_xmm0412591401_pi300-10000_pass1_cl_src61.gif
[Sat Mar 31 05:09:08 2012] Mean detx,y = (-4597.72, 7067.80) 
[Sat Mar 31 05:09:10 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Mar 31 05:09:32 2012] Binned source spectrum to 10 counts/bin
[Sat Mar 31 05:09:32 2012] Setting source spectrum file to fullrun_mos2_xmm0412591401_pi300-10000_pass1_cl_src61_src_b10.pi.gz
[Sat Mar 31 05:09:32 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0412591401_pi300-10000_pass1_cl_src61_bgd.pi.gz
[Sat Mar 31 09:34:47 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Mar 31 09:34:47 2012] rmf not generated due to insufficient counts
[Sat Mar 31 11:26:51 2012] Updating aperture counts using extracted products
[Sat Mar 31 11:26:51 2012] Error reading totcts from fullrun_mos2_xmm0412591401_pi300-10000_pass1_cl_src61_src_b10.pi.gz
[Sat Mar 31 11:27:01 2012] Calculating source flux in energy range 0.30-8.00
[Sat Mar 31 11:27:01 2012] Using photon index=1.80, rate=0.0342, arf fullrun_mos2_xmm0412591401_pi300-10000_pass1_cl_src61.arf
[Sat Mar 31 11:27:01 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Mar 31 11:27:01 2012] Updating source flux to 7e-13
[Sat Mar 31 11:37:36 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting