[Wed Mar 28 00:31:46 2012] Detection parameters:
  Position = (376.1, 393.4) = 5 34 12.29 22 6 27.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 673.0 +/- 37.3
  Background counts = 413.0
  Rate = 0.06 +/- 0.003

[Wed Mar 28 00:31:53 2012] Off-axis axis estimate = 8.90'
[Wed Mar 28 10:34:54 2012] Using EEF radius (= 10.88 ")to estimate initial spatial extent for simple fitting
[Wed Mar 28 10:34:54 2012] Initial guess for spatial extent in simple fitting = 10.88"
[Wed Mar 28 10:34:54 2012] source mask rpix=2.5, npix_max = 36, mask sum = 26, frac = 0.722
[Wed Mar 28 10:34:54 2012] Giving source the simple spatial ID 36 for pass 0, mean size = 10.88"
[Thu Mar 29 00:24:06 2012] fullrun_mos2_xmm0412591401_pi300-10000_cl_pass0_src36.ximg exists
[Thu Mar 29 00:24:06 2012] fullrun_mos2_xmm0412591401_pi300-10000_cl_pass0_src36_1.ximg exists
[Thu Mar 29 00:24:06 2012] Fit fullrun_mos2_xmm0412591401_pi300-10000_cl_pass0_src36 appears to have run properly
[Thu Mar 29 00:24:10 2012] fullrun_mos2_xmm0412591401_pi300-10000_cl_pass0_tfrozen_src36.ximg exists
[Thu Mar 29 00:24:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591401_pi300-10000_cl_pass0_tfrozen_src36.csv
[Thu Mar 29 00:24:10 2012] fullrun_mos2_xmm0412591401_pi300-10000_cl_pass0_tfrozen_src36_1.ximg exists
[Thu Mar 29 00:24:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591401_pi300-10000_cl_pass0_tfrozen_src36.csv
[Thu Mar 29 00:24:10 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412591401_pi300-10000_cl_pass0_tfrozen_src36_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412591401_pi300-10000_cl_pass0_tfrozen_src36.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 29 00:25:25 2012] Spatial fit model total counts = 4966.000000, observed total counts = 4551.000000
[Thu Mar 29 00:25:25 2012] Offset between fit and detection position for source 57 = 1.075147 pixels
[Thu Mar 29 00:25:25 2012] 4658.002000 total counts/ 4101.010000 bgd. counts: snr = 8.697682
Spatial fit parameters:
  Offset between fit and detection position for source 57 = 1.075147 pixels
  Position = (377.1, 392.9) = 5 34 11.99 22 6 23.8
  Extent = 21.8 (18.9-43.5)" x 4.9 (4.2-5.7)", rotation angle = 360 (360-0) degrees
  Source counts = 557.0 +/- 68.2
  Background counts = 4101.0
  Rate = 0.03 +/- 0.003
[Thu Mar 29 00:25:26 2012] Vigneting correction estimate = 1.000000
[Thu Mar 29 00:25:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar 29 00:25:26 2012] Assessing source extent using major axis lower bound
[Thu Mar 29 00:25:26 2012] Source does appear to be extended
[Thu Mar 29 00:25:26 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 3.33
[Thu Mar 29 00:25:26 2012] Source is asymmetric
[Thu Mar 29 00:25:26 2012] Source is confused with source 62
[Thu Mar 29 11:04:59 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Mar 29 11:04:59 2012] Initial guess for spatial extent in simple fitting = 13.31"
[Thu Mar 29 11:04:59 2012] source mask rpix=3.1, npix_max = 50, mask sum = 36, frac = 0.710
[Thu Mar 29 11:04:59 2012] Giving source the simple spatial ID 36 for pass 1, mean size = 13.31"
[Fri Mar 30 21:00:05 2012] fullrun_mos2_xmm0412591401_pi300-10000_cl_pass1_src36.ximg exists
[Fri Mar 30 21:00:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591401_pi300-10000_cl_pass1_src36.csv
[Fri Mar 30 21:00:06 2012] fullrun_mos2_xmm0412591401_pi300-10000_cl_pass1_src36_1.ximg exists
[Fri Mar 30 21:00:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591401_pi300-10000_cl_pass1_src36.csv
[Fri Mar 30 21:00:06 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412591401_pi300-10000_cl_pass1_src36_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412591401_pi300-10000_cl_pass1_src36.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 30 21:00:09 2012] fullrun_mos2_xmm0412591401_pi300-10000_cl_pass1_tfrozen_src36.ximg exists
[Fri Mar 30 21:00:09 2012] fullrun_mos2_xmm0412591401_pi300-10000_cl_pass1_tfrozen_src36_1.ximg exists
[Fri Mar 30 21:00:09 2012] Fit fullrun_mos2_xmm0412591401_pi300-10000_cl_pass1_tfrozen_src36 appears to have run properly
[Fri Mar 30 21:01:43 2012] Warning, spatial fit 36 centroid is now closest to src. 64
[Fri Mar 30 21:01:44 2012] Vigneting correction estimate = 1.000000
[Fri Mar 30 21:01:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 30 21:01:44 2012] Assessing source extent using major axis lower bound
[Fri Mar 30 21:01:44 2012] Source does appear to be extended
[Fri Mar 30 21:01:44 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 3.33
[Fri Mar 30 21:01:44 2012] Source is asymmetric
[Sat Mar 31 03:06:24 2012] XMMSAS src. selection expression = ellipse(32758.546600, 34135.681800, 1305.252038, 292.095008, 359.965000, X, Y)
[Sat Mar 31 03:06:24 2012] Writing source region out to fullrun_mos2_xmm0412591401_pi300-10000_pass1_cl_src57_src.reg
[Sat Mar 31 03:06:24 2012] Extracting stamp from image fullrun_mos2_xmm0412591401_pi300-10000_cl_sm2.00.img.gz, (302, 318) - (452, 468)
[Sat Mar 31 03:06:24 2012] XMMSAS bgd. selection expression = annulus(32758.546600, 34135.681800, 2175.420063, 4350.840125, X, Y) && !ellipse(27894.900116, 34447.310638, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27920.172000, 35925.192000, 1724.160050, 442.086413, 90.025000, X, Y) && !ellipse(28024.578200, 35096.256680, 856.416025, 503.164014, 1.396950, X, Y) && !ellipse(27942.074677, 36385.760803, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30113.004517, 34244.798279, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29598.252747, 34314.936188, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30711.884000, 34238.080000, 1765.632051, 428.373612, 0.000000, X, Y) && !ellipse(34594.610000, 30011.498000, 1675.880048, 492.396814, 357.935840, X, Y) && !ellipse(28108.826000, 36990.346000, 677.118419, 677.118419, 0.000000, X, Y) && !ellipse(28093.321075, 38754.729279, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31565.594940, 34158.570892, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28210.922800, 37827.455400, 986.048028, 986.048028, 0.000000, X, Y) && !ellipse(35595.087769, 30914.557861, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34314.745026, 32125.545929, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28031.477478, 37711.247009, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31095.224640, 34720.178619, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34222.241150, 29184.511566, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28993.360077, 35698.163971, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34243.988495, 30378.472931, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29804.087400, 35047.984600, 741.655221, 741.655221, 0.000000, X, Y) && !ellipse(27631.545105, 39187.918549, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34242.552000, 30965.696000, 1727.024050, 1727.024050, 0.000000, X, Y) && !ellipse(32205.595062, 34209.292572, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34126.899400, 31185.820572, 1650.528047, 1650.528047, 0.000000, X, Y) && !ellipse(29378.793335, 35695.386810, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35277.228000, 30366.250000, 1754.856050, 245.900807, 1.338000, X, Y) && !ellipse(34964.980286, 29434.610016, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34816.439362, 31441.392670, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35395.016000, 29069.870000, 1022.176029, 1022.176029, 0.000000, X, Y) && !ellipse(32785.195923, 34753.177979, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32027.790405, 34560.016632, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30030.061401, 35448.604492, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35003.199432, 32915.693268, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35455.032318, 31619.961975, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33302.950531, 34997.873444, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32017.634918, 34972.273651, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30587.758270, 35960.682648, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35569.121582, 30136.798889, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29227.002655, 36338.172058, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33153.676000, 33692.094000, 2128.200061, 2128.200061, 0.000000, X, Y) && !ellipse(34099.002655, 32555.371277, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34191.933990, 32998.806305, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32178.404907, 35349.271881, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Mar 31 03:06:24 2012] Writing fullrun_mos2_xmm0412591401_pi300-10000_pass1_cl_src57.gif
[Sat Mar 31 04:01:03 2012] Mean detx,y = (-5087.43, 6961.88) 
[Sat Mar 31 04:01:05 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Mar 31 04:01:29 2012] Binned source spectrum to 10 counts/bin
[Sat Mar 31 04:01:29 2012] Setting source spectrum file to fullrun_mos2_xmm0412591401_pi300-10000_pass1_cl_src57_src_b10.pi.gz
[Sat Mar 31 04:01:29 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0412591401_pi300-10000_pass1_cl_src57_bgd.pi.gz
[Sat Mar 31 06:41:28 2012] Warning, no src. light curve found
[Sat Mar 31 11:26:49 2012] Updating aperture counts using extracted products
[Sat Mar 31 11:26:49 2012] Error reading totcts from fullrun_mos2_xmm0412591401_pi300-10000_pass1_cl_src57_src_b10.pi.gz
[Sat Mar 31 11:26:58 2012] Calculating source flux in energy range 0.30-8.00
[Sat Mar 31 11:26:58 2012] Using photon index=1.80, rate=0.0255, arf fullrun_mos2_xmm0412591401_pi300-10000_pass1_cl_src57.arf
[Sat Mar 31 11:26:58 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Mar 31 11:26:59 2012] Updating source flux to 5.6e-13
[Sat Mar 31 11:37:36 2012] Flag c found in src. 57 procflags, skipping spectral fitting