[Wed Mar 28 00:31:46 2012] Detection parameters:
  Position = (298.2, 395.9) = 5 34 36.69 22 6 36.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1238.6 +/- 51.7
  Background counts = 504.4
  Rate = 0.09 +/- 0.004

[Wed Mar 28 00:31:53 2012] Off-axis axis estimate = 7.07'
[Wed Mar 28 10:34:53 2012] Using EEF radius (= 9.96 ")to estimate initial spatial extent for simple fitting
[Wed Mar 28 10:34:53 2012] Initial guess for spatial extent in simple fitting = 9.96"
[Wed Mar 28 10:34:53 2012] source mask rpix=2.3, npix_max = 31, mask sum = 30, frac = 0.963
[Wed Mar 28 10:34:53 2012] Giving source the simple spatial ID 10 for pass 0, mean size = 9.96"
[Thu Mar 29 00:24:06 2012] fullrun_mos2_xmm0412591401_pi300-10000_cl_pass0_src10.ximg exists
[Thu Mar 29 00:24:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591401_pi300-10000_cl_pass0_src10.csv
[Thu Mar 29 00:24:06 2012] fullrun_mos2_xmm0412591401_pi300-10000_cl_pass0_src10_1.ximg exists
[Thu Mar 29 00:24:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591401_pi300-10000_cl_pass0_src10.csv
[Thu Mar 29 00:24:06 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412591401_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412591401_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 29 00:24:09 2012] fullrun_mos2_xmm0412591401_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Thu Mar 29 00:24:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591401_pi300-10000_cl_pass0_tfrozen_src10.csv
[Thu Mar 29 00:24:09 2012] fullrun_mos2_xmm0412591401_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Thu Mar 29 00:24:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591401_pi300-10000_cl_pass0_tfrozen_src10.csv
[Thu Mar 29 00:24:09 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412591401_pi300-10000_cl_pass0_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412591401_pi300-10000_cl_pass0_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 29 00:25:25 2012] Warning, spatial fit 10 centroid is now closest to src. 39
[Thu Mar 29 00:25:26 2012] Source 56 is offset by 3.195943 and -0.041696 pixels which is larger than
2 X fitted extent = 2.351251 x 9.206989, not incorporating fit results
[Thu Mar 29 00:25:26 2012] Vigneting correction estimate = 1.000000
[Thu Mar 29 00:25:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar 29 00:25:26 2012] Assessing source extent using major
[Thu Mar 29 00:25:26 2012] Source does appear to be extended
[Thu Mar 29 00:25:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar 29 11:04:59 2012] Using EEF radius (= 9.96 ")to estimate initial spatial extent for simple fitting
[Thu Mar 29 11:04:59 2012] Initial guess for spatial extent in simple fitting = 9.96"
[Thu Mar 29 11:04:59 2012] source mask rpix=2.3, npix_max = 31, mask sum = 30, frac = 0.963
[Thu Mar 29 11:04:59 2012] Giving source the simple spatial ID 10 for pass 1, mean size = 9.96"
[Fri Mar 30 21:00:05 2012] fullrun_mos2_xmm0412591401_pi300-10000_cl_pass1_src10.ximg exists
[Fri Mar 30 21:00:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591401_pi300-10000_cl_pass1_src10.csv
[Fri Mar 30 21:00:05 2012] fullrun_mos2_xmm0412591401_pi300-10000_cl_pass1_src10_1.ximg exists
[Fri Mar 30 21:00:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591401_pi300-10000_cl_pass1_src10.csv
[Fri Mar 30 21:00:05 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412591401_pi300-10000_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412591401_pi300-10000_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 30 21:00:08 2012] fullrun_mos2_xmm0412591401_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Fri Mar 30 21:00:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591401_pi300-10000_cl_pass1_tfrozen_src10.csv
[Fri Mar 30 21:00:08 2012] fullrun_mos2_xmm0412591401_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Fri Mar 30 21:00:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591401_pi300-10000_cl_pass1_tfrozen_src10.csv
[Fri Mar 30 21:00:08 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412591401_pi300-10000_cl_pass1_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412591401_pi300-10000_cl_pass1_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 30 21:01:42 2012] Warning, spatial fit 10 centroid is now closest to src. 39
[Fri Mar 30 21:01:43 2012] Spatial fit model total counts = 7067.800000, observed total counts = 6325.000000
[Fri Mar 30 21:01:43 2012] Poor agreement between spatial fit and data for source 56
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Mar 30 21:01:44 2012] Vigneting correction estimate = 1.000000
[Fri Mar 30 21:01:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 30 21:01:44 2012] Assessing source extent using major
[Fri Mar 30 21:01:44 2012] Source does appear to be extended
[Fri Mar 30 21:01:44 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Mar 31 03:06:22 2012] Counts = 1238.568237, rescaling region sizes by 2.000000
[Sat Mar 31 03:06:22 2012] XMMSAS src. selection expression = ellipse(25893.223083, 34395.192413, 1305.000000, 1305.000000, 0.000000, X, Y)
[Sat Mar 31 03:06:22 2012] Writing source region out to fullrun_mos2_xmm0412591401_pi300-10000_pass1_cl_src56_src.reg
[Sat Mar 31 03:06:22 2012] Extracting stamp from image fullrun_mos2_xmm0412591401_pi300-10000_cl_sm2.00.img.gz, (223, 321) - (373, 471)
[Sat Mar 31 03:06:22 2012] XMMSAS bgd. selection expression = annulus(25893.223083, 34395.192413, 4350.000000, 8700.000000, X, Y) && !ellipse(24752.949066, 35182.918365, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(27894.900116, 34447.310638, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27143.029200, 34780.574000, 1063.080031, 1063.080031, 0.000000, X, Y) && !ellipse(27920.172000, 35925.192000, 1724.160050, 442.086413, 90.025000, X, Y) && !ellipse(28024.578200, 35096.256680, 856.416025, 503.164014, 1.396950, X, Y) && !ellipse(24209.748657, 35236.510132, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27235.646200, 35028.640200, 531.540015, 531.540015, 0.000000, X, Y) && !ellipse(27942.074677, 36385.760803, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25002.657227, 34448.051392, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30113.004517, 34244.798279, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29598.252747, 34314.936188, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27183.632800, 35845.671800, 809.576023, 809.576023, 0.000000, X, Y) && !ellipse(30711.884000, 34238.080000, 1765.632051, 428.373612, 0.000000, X, Y) && !ellipse(34594.610000, 30011.498000, 1675.880048, 492.396814, 357.935840, X, Y) && !ellipse(28108.826000, 36990.346000, 677.118419, 677.118419, 0.000000, X, Y) && !ellipse(28093.321075, 38754.729279, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27247.576800, 36553.846000, 814.320023, 814.320023, 0.000000, X, Y) && !ellipse(28154.057526, 39535.844208, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31565.594940, 34158.570892, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28210.922800, 37827.455400, 986.048028, 986.048028, 0.000000, X, Y) && !ellipse(34509.637451, 25007.184052, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20133.561829, 28758.984711, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34314.745026, 32125.545929, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28246.845490, 42400.363281, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28263.978400, 41162.836000, 613.126418, 613.126418, 0.000000, X, Y) && !ellipse(28180.493652, 40566.776154, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32758.546600, 34135.681800, 1740.336050, 389.460011, 359.965000, X, Y) && !ellipse(28031.477478, 37711.247009, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26417.299316, 35091.747314, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25728.799774, 35182.289124, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34162.752563, 26654.589905, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31095.224640, 34720.178619, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34047.272064, 25879.055847, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25023.541687, 35182.233368, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34222.241150, 29184.511566, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28993.360077, 35698.163971, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34011.434000, 25391.690000, 1604.064046, 1604.064046, 0.000000, X, Y) && !ellipse(28308.521820, 43358.916473, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34243.988495, 30378.472931, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27719.528800, 41969.554000, 2146.520062, 2146.520062, 0.000000, X, Y) && !ellipse(19582.420227, 30837.171722, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27436.210200, 40190.696858, 697.080820, 697.080820, 0.000000, X, Y) && !ellipse(29804.087400, 35047.984600, 741.655221, 741.655221, 0.000000, X, Y) && !ellipse(23984.652618, 34525.665863, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27631.545105, 39187.918549, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23589.159454, 35272.358337, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27281.821400, 37428.802000, 659.837619, 659.837619, 0.000000, X, Y) && !ellipse(27808.396606, 41455.709167, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34242.552000, 30965.696000, 1727.024050, 1727.024050, 0.000000, X, Y) && !ellipse(32205.595062, 34209.292572, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19464.791809, 29287.298370, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34126.899400, 31185.820572, 1650.528047, 1650.528047, 0.000000, X, Y) && !ellipse(27523.719055, 38060.951538, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29378.793335, 35695.386810, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27697.153534, 40927.167175, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20223.796982, 29964.097198, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35277.228000, 30366.250000, 1754.856050, 245.900807, 1.338000, X, Y) && !ellipse(34964.980286, 29434.610016, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20301.432693, 32233.624207, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27520.525055, 38575.581177, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27797.112732, 42578.887451, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34816.439362, 31441.392670, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27759.074127, 43364.523895, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19891.905045, 26746.145935, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35395.016000, 29069.870000, 1022.176029, 1022.176029, 0.000000, X, Y) && !ellipse(19626.458600, 29677.672000, 1360.072039, 1360.072039, 0.000000, X, Y) && !ellipse(20247.011230, 33459.360962, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20565.698000, 34362.326000, 1657.648048, 1657.648048, 0.000000, X, Y) && !ellipse(22827.163391, 35151.464233, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32785.195923, 34753.177979, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32027.790405, 34560.016632, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35271.806091, 27098.213440, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30030.061401, 35448.604492, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20526.998672, 31529.932587, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26076.951111, 35709.766449, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35003.199432, 32915.693268, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20393.860901, 28130.164917, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19965.320587, 32861.612976, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19885.968399, 25273.634827, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34974.732000, 25231.754000, 741.628021, 741.628021, 0.000000, X, Y) && !ellipse(20221.210983, 25806.658508, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20695.279739, 30832.113892, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19054.321625, 32231.210785, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20397.895218, 27610.867737, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35455.032318, 31619.961975, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33302.950531, 34997.873444, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19537.255524, 32901.111847, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32017.634918, 34972.273651, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19237.464218, 26998.687012, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30587.758270, 35960.682648, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29227.002655, 36338.172058, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33153.676000, 33692.094000, 2128.200061, 2128.200061, 0.000000, X, Y) && !ellipse(34099.002655, 32555.371277, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34191.933990, 32998.806305, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21423.979080, 34803.326172, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32178.404907, 35349.271881, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Mar 31 03:06:22 2012] Writing fullrun_mos2_xmm0412591401_pi300-10000_pass1_cl_src56.gif
[Sat Mar 31 03:34:04 2012] Mean detx,y = (1593.48, 7151.50) 
[Sat Mar 31 03:34:07 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Mar 31 03:35:42 2012] Binned source spectrum to 10 counts/bin
[Sat Mar 31 03:35:42 2012] Setting source spectrum file to fullrun_mos2_xmm0412591401_pi300-10000_pass1_cl_src56_src_b10.pi.gz
[Sat Mar 31 03:35:42 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0412591401_pi300-10000_pass1_cl_src56_bgd.pi.gz
[Sat Mar 31 07:11:22 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Mar 31 07:11:22 2012] rmf not generated due to insufficient counts
[Sat Mar 31 11:26:48 2012] Updating aperture counts using extracted products
[Sat Mar 31 11:26:48 2012] Error reading totcts from fullrun_mos2_xmm0412591401_pi300-10000_pass1_cl_src56_src_b10.pi.gz
[Sat Mar 31 11:26:57 2012] Calculating source flux in energy range 0.30-8.00
[Sat Mar 31 11:26:57 2012] Using photon index=1.80, rate=0.0909, arf fullrun_mos2_xmm0412591401_pi300-10000_pass1_cl_src56.arf
[Sat Mar 31 11:26:57 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Mar 31 11:26:58 2012] Updating source flux to 1.7e-12
[Sat Mar 31 11:37:36 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting