[Wed Mar 28 00:31:46 2012] Detection parameters:
  Position = (355.5, 394.6) = 5 34 18.75 22 6 29.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 852.2 +/- 42.5
  Background counts = 418.7
  Rate = 0.07 +/- 0.003

[Wed Mar 28 00:31:53 2012] Off-axis axis estimate = 8.11'
[Wed Mar 28 10:34:53 2012] Using EEF radius (= 10.48 ")to estimate initial spatial extent for simple fitting
[Wed Mar 28 10:34:53 2012] Initial guess for spatial extent in simple fitting = 10.48"
[Wed Mar 28 10:34:53 2012] source mask rpix=2.4, npix_max = 33, mask sum = 23, frac = 0.679
[Wed Mar 28 10:34:53 2012] Giving source the simple spatial ID 19 for pass 0, mean size = 10.48"
[Thu Mar 29 00:24:06 2012] fullrun_mos2_xmm0412591401_pi300-10000_cl_pass0_src19.ximg exists
[Thu Mar 29 00:24:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591401_pi300-10000_cl_pass0_src19.csv
[Thu Mar 29 00:24:06 2012] fullrun_mos2_xmm0412591401_pi300-10000_cl_pass0_src19_1.ximg exists
[Thu Mar 29 00:24:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591401_pi300-10000_cl_pass0_src19.csv
[Thu Mar 29 00:24:06 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412591401_pi300-10000_cl_pass0_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412591401_pi300-10000_cl_pass0_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 29 00:24:09 2012] fullrun_mos2_xmm0412591401_pi300-10000_cl_pass0_tfrozen_src19.ximg exists
[Thu Mar 29 00:24:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591401_pi300-10000_cl_pass0_tfrozen_src19.csv
[Thu Mar 29 00:24:09 2012] fullrun_mos2_xmm0412591401_pi300-10000_cl_pass0_tfrozen_src19_1.ximg exists
[Thu Mar 29 00:24:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591401_pi300-10000_cl_pass0_tfrozen_src19.csv
[Thu Mar 29 00:24:09 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412591401_pi300-10000_cl_pass0_tfrozen_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412591401_pi300-10000_cl_pass0_tfrozen_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 29 00:25:25 2012] Warning, spatial fit 19 centroid is now closest to src. 45
[Thu Mar 29 00:25:26 2012] Spatial fit model total counts = 6295.890000, observed total counts = 6400.000000
[Thu Mar 29 00:25:26 2012] Offset between fit and detection position for source 55 = 3.712160 pixels
[Thu Mar 29 00:25:26 2012] Warning, changing simple spatial fit ID from 19 to 44
[Thu Mar 29 00:25:26 2012] 6214.680000 total counts/ 5862.080000 bgd. counts: snr = 4.605284
Spatial fit parameters:
  Offset between fit and detection position for source 55 = 3.712160 pixels
  Position = (359.1, 393.9) = 5 34 17.61 22 6 28.0
  Extent = 21.4 (18.7-42.7)" x 4.6 (3.4-6.0)", rotation angle = 0 (358-0) degrees
  Source counts = 352.6 +/- 78.8
  Background counts = 5862.1
  Rate = 0.02 +/- 0.004
[Thu Mar 29 00:25:26 2012] Vigneting correction estimate = 1.000000
[Thu Mar 29 00:25:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar 29 00:25:26 2012] Assessing source extent using major axis lower bound
[Thu Mar 29 00:25:26 2012] Source does appear to be extended
[Thu Mar 29 00:25:26 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 3.09
[Thu Mar 29 00:25:26 2012] Source is asymmetric
[Thu Mar 29 00:25:26 2012] Source is confused with source 60
[Thu Mar 29 11:04:59 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Mar 29 11:04:59 2012] Initial guess for spatial extent in simple fitting = 12.98"
[Thu Mar 29 11:04:59 2012] source mask rpix=3.0, npix_max = 48, mask sum = 34, frac = 0.700
[Thu Mar 29 11:04:59 2012] Giving source the simple spatial ID 19 for pass 1, mean size = 12.98"
[Fri Mar 30 21:00:05 2012] fullrun_mos2_xmm0412591401_pi300-10000_cl_pass1_src19.ximg exists
[Fri Mar 30 21:00:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591401_pi300-10000_cl_pass1_src19.csv
[Fri Mar 30 21:00:05 2012] fullrun_mos2_xmm0412591401_pi300-10000_cl_pass1_src19_1.ximg exists
[Fri Mar 30 21:00:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591401_pi300-10000_cl_pass1_src19.csv
[Fri Mar 30 21:00:05 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412591401_pi300-10000_cl_pass1_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412591401_pi300-10000_cl_pass1_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 30 21:00:08 2012] fullrun_mos2_xmm0412591401_pi300-10000_cl_pass1_tfrozen_src19.ximg exists
[Fri Mar 30 21:00:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591401_pi300-10000_cl_pass1_tfrozen_src19.csv
[Fri Mar 30 21:00:08 2012] fullrun_mos2_xmm0412591401_pi300-10000_cl_pass1_tfrozen_src19_1.ximg exists
[Fri Mar 30 21:00:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591401_pi300-10000_cl_pass1_tfrozen_src19.csv
[Fri Mar 30 21:00:08 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412591401_pi300-10000_cl_pass1_tfrozen_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412591401_pi300-10000_cl_pass1_tfrozen_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 30 21:01:42 2012] Warning, spatial fit 19 centroid is now closest to src. 37
[Fri Mar 30 21:01:43 2012] Spatial fit model total counts = 6460.050000, observed total counts = 6603.000000
[Fri Mar 30 21:01:43 2012] Offset between fit and detection position for source 55 = 5.577586 pixels
[Fri Mar 30 21:01:43 2012] Warning, changing simple spatial fit ID from 19 to 38
[Fri Mar 30 21:01:43 2012] 5908.933000 total counts/ 5217.870000 bgd. counts: snr = 9.566895
Spatial fit parameters:
  Offset between fit and detection position for source 55 = 5.577586 pixels
  Position = (353.6, 394.1) = 5 34 19.35 22 6 29.0
  Extent = 22.1 (22.0-44.1)" x 5.4 (4.5-6.4)", rotation angle = 0 (359-0) degrees
  Source counts = 691.1 +/- 76.9
  Background counts = 5217.9
  Rate = 0.03 +/- 0.004
[Fri Mar 30 21:01:44 2012] Vigneting correction estimate = 1.000000
[Fri Mar 30 21:01:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 30 21:01:44 2012] Assessing source extent using major axis lower bound
[Fri Mar 30 21:01:44 2012] Source does appear to be extended
[Fri Mar 30 21:01:44 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 3.44
[Fri Mar 30 21:01:44 2012] Source is asymmetric
[Sat Mar 31 03:06:23 2012] XMMSAS src. selection expression = ellipse(30711.884000, 34238.080000, 1324.224038, 321.280209, 0.000000, X, Y)
[Sat Mar 31 03:06:23 2012] Writing source region out to fullrun_mos2_xmm0412591401_pi300-10000_pass1_cl_src55_src.reg
[Sat Mar 31 03:06:23 2012] Extracting stamp from image fullrun_mos2_xmm0412591401_pi300-10000_cl_sm2.00.img.gz, (277, 318) - (430, 470)
[Sat Mar 31 03:06:23 2012] XMMSAS bgd. selection expression = annulus(30711.884000, 34238.080000, 2207.040064, 4414.080127, X, Y) && !ellipse(24752.949066, 35182.918365, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(27894.900116, 34447.310638, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27143.029200, 34780.574000, 1063.080031, 1063.080031, 0.000000, X, Y) && !ellipse(27920.172000, 35925.192000, 1724.160050, 442.086413, 90.025000, X, Y) && !ellipse(28024.578200, 35096.256680, 856.416025, 503.164014, 1.396950, X, Y) && !ellipse(27235.646200, 35028.640200, 531.540015, 531.540015, 0.000000, X, Y) && !ellipse(27942.074677, 36385.760803, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25893.223083, 34395.192413, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30113.004517, 34244.798279, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29598.252747, 34314.936188, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27183.632800, 35845.671800, 809.576023, 809.576023, 0.000000, X, Y) && !ellipse(34594.610000, 30011.498000, 1675.880048, 492.396814, 357.935840, X, Y) && !ellipse(28108.826000, 36990.346000, 677.118419, 677.118419, 0.000000, X, Y) && !ellipse(28093.321075, 38754.729279, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27247.576800, 36553.846000, 814.320023, 814.320023, 0.000000, X, Y) && !ellipse(31565.594940, 34158.570892, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28210.922800, 37827.455400, 986.048028, 986.048028, 0.000000, X, Y) && !ellipse(35595.087769, 30914.557861, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34314.745026, 32125.545929, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32758.546600, 34135.681800, 1740.336050, 389.460011, 359.965000, X, Y) && !ellipse(28031.477478, 37711.247009, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26417.299316, 35091.747314, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25728.799774, 35182.289124, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31095.224640, 34720.178619, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34222.241150, 29184.511566, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28993.360077, 35698.163971, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34243.988495, 30378.472931, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29804.087400, 35047.984600, 741.655221, 741.655221, 0.000000, X, Y) && !ellipse(27631.545105, 39187.918549, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27281.821400, 37428.802000, 659.837619, 659.837619, 0.000000, X, Y) && !ellipse(34242.552000, 30965.696000, 1727.024050, 1727.024050, 0.000000, X, Y) && !ellipse(32205.595062, 34209.292572, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34126.899400, 31185.820572, 1650.528047, 1650.528047, 0.000000, X, Y) && !ellipse(27523.719055, 38060.951538, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29378.793335, 35695.386810, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35277.228000, 30366.250000, 1754.856050, 245.900807, 1.338000, X, Y) && !ellipse(34964.980286, 29434.610016, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27520.525055, 38575.581177, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34816.439362, 31441.392670, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35395.016000, 29069.870000, 1022.176029, 1022.176029, 0.000000, X, Y) && !ellipse(32785.195923, 34753.177979, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32027.790405, 34560.016632, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30030.061401, 35448.604492, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26076.951111, 35709.766449, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35003.199432, 32915.693268, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35455.032318, 31619.961975, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33302.950531, 34997.873444, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32017.634918, 34972.273651, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30587.758270, 35960.682648, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35569.121582, 30136.798889, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29227.002655, 36338.172058, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33153.676000, 33692.094000, 2128.200061, 2128.200061, 0.000000, X, Y) && !ellipse(34099.002655, 32555.371277, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34191.933990, 32998.806305, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32178.404907, 35349.271881, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Mar 31 03:06:23 2012] Writing fullrun_mos2_xmm0412591401_pi300-10000_pass1_cl_src55.gif
[Sat Mar 31 03:39:51 2012] Mean detx,y = (-3085.11, 6948.80) 
[Sat Mar 31 03:39:53 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Mar 31 03:40:20 2012] Binned source spectrum to 10 counts/bin
[Sat Mar 31 03:40:20 2012] Setting source spectrum file to fullrun_mos2_xmm0412591401_pi300-10000_pass1_cl_src55_src_b10.pi.gz
[Sat Mar 31 03:40:20 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0412591401_pi300-10000_pass1_cl_src55_bgd.pi.gz
[Sat Mar 31 11:26:48 2012] Updating aperture counts using extracted products
[Sat Mar 31 11:26:48 2012] Error reading totcts from fullrun_mos2_xmm0412591401_pi300-10000_pass1_cl_src55_src_b10.pi.gz
[Sat Mar 31 11:26:58 2012] Calculating source flux in energy range 0.30-8.00
[Sat Mar 31 11:26:58 2012] Using photon index=1.80, rate=0.0316, arf fullrun_mos2_xmm0412591401_pi300-10000_pass1_cl_src55.arf
[Sat Mar 31 11:26:58 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Mar 31 11:26:58 2012] Updating source flux to 6.6e-13
[Sat Mar 31 11:37:36 2012] Flag c found in src. 55 procflags, skipping spectral fitting