[Wed Mar 28 00:31:45 2012] Detection parameters:
  Position = (341.4, 402.1) = 5 34 23.15 22 7 5.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 511.3 +/- 41.0
  Background counts = 402.9
  Rate = 0.04 +/- 0.003

[Wed Mar 28 00:31:53 2012] Off-axis axis estimate = 8.13'
[Wed Mar 28 10:34:54 2012] Using EEF radius (= 10.50 ")to estimate initial spatial extent for simple fitting
[Wed Mar 28 10:34:54 2012] Initial guess for spatial extent in simple fitting = 10.50"
[Wed Mar 28 10:34:54 2012] source mask rpix=2.4, npix_max = 33, mask sum = 30, frac = 0.884
[Wed Mar 28 10:34:54 2012] Giving source the simple spatial ID 64 for pass 0, mean size = 10.50"
[Thu Mar 29 00:24:07 2012] fullrun_mos2_xmm0412591401_pi300-10000_cl_pass0_src64.ximg exists
[Thu Mar 29 00:24:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591401_pi300-10000_cl_pass0_src64.csv
[Thu Mar 29 00:24:07 2012] fullrun_mos2_xmm0412591401_pi300-10000_cl_pass0_src64_1.ximg exists
[Thu Mar 29 00:24:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591401_pi300-10000_cl_pass0_src64.csv
[Thu Mar 29 00:24:07 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412591401_pi300-10000_cl_pass0_src64_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412591401_pi300-10000_cl_pass0_src64.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 29 00:24:10 2012] fullrun_mos2_xmm0412591401_pi300-10000_cl_pass0_tfrozen_src64.ximg exists
[Thu Mar 29 00:24:10 2012] fullrun_mos2_xmm0412591401_pi300-10000_cl_pass0_tfrozen_src64_1.ximg exists
[Thu Mar 29 00:24:10 2012] Fit fullrun_mos2_xmm0412591401_pi300-10000_cl_pass0_tfrozen_src64 appears to have run properly
[Thu Mar 29 00:25:25 2012] Source 50 is offset by -2.857154 and 0.392847 pixels which is larger than
2 X fitted extent = 1.280041 x 1.280041, not incorporating fit results
[Thu Mar 29 00:25:25 2012] Spatial fit model total counts = 6238.430000, observed total counts = 5246.000000
[Thu Mar 29 00:25:25 2012] Poor agreement between spatial fit and data for source 50
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Mar 29 00:25:26 2012] Source 50 is offset by 4.690755 and -2.229820 pixels which is larger than
2 X fitted extent = 9.840598 x 1.618892, not incorporating fit results
[Thu Mar 29 00:25:26 2012] Spatial fit model total counts = 7137.200000, observed total counts = 7316.000000
[Thu Mar 29 00:25:26 2012] Offset between fit and detection position for source 50 = 2.160560 pixels
[Thu Mar 29 00:25:26 2012] 6129.106000 total counts/ 5599.040000 bgd. counts: snr = 7.083912
Spatial fit parameters:
  Offset between fit and detection position for source 50 = 2.160560 pixels
  Position = (343.1, 403.4) = 5 34 22.62 22 7 9.5
  Extent = 9.3 (7.6-10.7)", rotation angle = 0
  Source counts = 530.1 +/- 78.3
  Background counts = 5599.0
  Rate = 0.02 +/- 0.004
[Thu Mar 29 00:25:26 2012] Vigneting correction estimate = 1.000000
[Thu Mar 29 00:25:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar 29 00:25:26 2012] Assessing source extent using major axis lower bound
[Thu Mar 29 00:25:26 2012] Source does appear to be extended
[Thu Mar 29 00:25:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar 29 00:25:26 2012] Source is confused with source 34
[Thu Mar 29 11:04:59 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Mar 29 11:04:59 2012] Initial guess for spatial extent in simple fitting = 9.27"
[Thu Mar 29 11:04:59 2012] source mask rpix=2.1, npix_max = 27, mask sum = 25, frac = 0.903
[Thu Mar 29 11:04:59 2012] Giving source the simple spatial ID 63 for pass 1, mean size = 9.27"
[Fri Mar 30 21:00:06 2012] fullrun_mos2_xmm0412591401_pi300-10000_cl_pass1_src63.ximg exists
[Fri Mar 30 21:00:06 2012] fullrun_mos2_xmm0412591401_pi300-10000_cl_pass1_src63_1.ximg exists
[Fri Mar 30 21:00:06 2012] Fit fullrun_mos2_xmm0412591401_pi300-10000_cl_pass1_src63 appears to have run properly
[Fri Mar 30 21:00:10 2012] fullrun_mos2_xmm0412591401_pi300-10000_cl_pass1_tfrozen_src63.ximg exists
[Fri Mar 30 21:00:10 2012] fullrun_mos2_xmm0412591401_pi300-10000_cl_pass1_tfrozen_src63_1.ximg exists
[Fri Mar 30 21:00:10 2012] Fit fullrun_mos2_xmm0412591401_pi300-10000_cl_pass1_tfrozen_src63 appears to have run properly
[Fri Mar 30 21:01:43 2012] Warning, spatial fit 63 centroid is now closest to src. 59
[Fri Mar 30 21:01:43 2012] Source 50 is offset by 4.075726 and 1.293455 pixels which is larger than
2 X fitted extent = 3.814648 x 3.814648, not incorporating fit results
[Fri Mar 30 21:01:44 2012] Vigneting correction estimate = 1.000000
[Fri Mar 30 21:01:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 30 21:01:44 2012] Assessing source extent using major axis lower bound
[Fri Mar 30 21:01:44 2012] Source does appear to be extended
[Fri Mar 30 21:01:44 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Mar 31 03:06:27 2012] XMMSAS src. selection expression = ellipse(29804.087400, 35047.984600, 556.241416, 556.241416, 0.000000, X, Y)
[Sat Mar 31 03:06:27 2012] Writing source region out to fullrun_mos2_xmm0412591401_pi300-10000_pass1_cl_src50_src.reg
[Sat Mar 31 03:06:27 2012] Extracting stamp from image fullrun_mos2_xmm0412591401_pi300-10000_cl_sm2.00.img.gz, (311, 371) - (375, 435)
[Sat Mar 31 03:06:27 2012] XMMSAS bgd. selection expression = annulus(29804.087400, 35047.984600, 927.069027, 1854.138053, X, Y) && !ellipse(27894.900116, 34447.310638, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27143.029200, 34780.574000, 1063.080031, 1063.080031, 0.000000, X, Y) && !ellipse(27920.172000, 35925.192000, 1724.160050, 442.086413, 90.025000, X, Y) && !ellipse(28024.578200, 35096.256680, 856.416025, 503.164014, 1.396950, X, Y) && !ellipse(27942.074677, 36385.760803, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30113.004517, 34244.798279, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29598.252747, 34314.936188, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27183.632800, 35845.671800, 809.576023, 809.576023, 0.000000, X, Y) && !ellipse(30711.884000, 34238.080000, 1765.632051, 428.373612, 0.000000, X, Y) && !ellipse(28108.826000, 36990.346000, 677.118419, 677.118419, 0.000000, X, Y) && !ellipse(27247.576800, 36553.846000, 814.320023, 814.320023, 0.000000, X, Y) && !ellipse(31565.594940, 34158.570892, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28210.922800, 37827.455400, 986.048028, 986.048028, 0.000000, X, Y) && !ellipse(32758.546600, 34135.681800, 1740.336050, 389.460011, 359.965000, X, Y) && !ellipse(28031.477478, 37711.247009, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31095.224640, 34720.178619, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28993.360077, 35698.163971, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32205.595062, 34209.292572, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29378.793335, 35695.386810, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32027.790405, 34560.016632, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30030.061401, 35448.604492, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32017.634918, 34972.273651, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30587.758270, 35960.682648, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29227.002655, 36338.172058, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33153.676000, 33692.094000, 2128.200061, 2128.200061, 0.000000, X, Y) && !ellipse(32178.404907, 35349.271881, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Mar 31 03:06:27 2012] Writing fullrun_mos2_xmm0412591401_pi300-10000_pass1_cl_src50.gif
[Sat Mar 31 04:56:20 2012] Mean detx,y = (-2161.59, 7709.34) 
[Sat Mar 31 04:56:23 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Mar 31 04:56:30 2012] Binned source spectrum to 10 counts/bin
[Sat Mar 31 04:56:30 2012] Setting source spectrum file to fullrun_mos2_xmm0412591401_pi300-10000_pass1_cl_src50_src_b10.pi.gz
[Sat Mar 31 04:56:30 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0412591401_pi300-10000_pass1_cl_src50_bgd.pi.gz
[Sat Mar 31 11:26:50 2012] Updating aperture counts using extracted products
[Sat Mar 31 11:26:50 2012] Error reading totcts from fullrun_mos2_xmm0412591401_pi300-10000_pass1_cl_src50_src_b10.pi.gz
[Sat Mar 31 11:27:00 2012] Calculating source flux in energy range 0.30-8.00
[Sat Mar 31 11:27:00 2012] Using photon index=1.80, rate=0.0243, arf fullrun_mos2_xmm0412591401_pi300-10000_pass1_cl_src50.arf
[Sat Mar 31 11:27:00 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Mar 31 11:27:00 2012] Updating source flux to 5e-13
[Sat Mar 31 11:37:36 2012] Flag b found in src. 50 procflags, skipping spectral fitting
[Sat Mar 31 11:37:36 2012] Flag p found in src. 50 procflags, skipping spectral fitting
[Sat Mar 31 11:37:36 2012] Flag c found in src. 50 procflags, skipping spectral fitting