[Wed Mar 28 00:31:45 2012] Detection parameters:
  Position = (321.9, 403.2) = 5 34 29.27 22 7 8.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1619.8 +/- 57.7
  Background counts = 413.7
  Rate = 0.1 +/- 0.005

[Wed Mar 28 00:31:53 2012] Off-axis axis estimate = 7.78'
[Wed Mar 28 10:34:53 2012] Using EEF radius (= 10.32 ")to estimate initial spatial extent for simple fitting
[Wed Mar 28 10:34:53 2012] Initial guess for spatial extent in simple fitting = 10.32"
[Wed Mar 28 10:34:53 2012] source mask rpix=2.4, npix_max = 32, mask sum = 34, frac = 1.030
[Wed Mar 28 10:34:53 2012] Giving source the simple spatial ID 6 for pass 0, mean size = 10.32"
[Thu Mar 29 00:24:05 2012] fullrun_mos2_xmm0412591401_pi300-10000_cl_pass0_src6.ximg exists
[Thu Mar 29 00:24:05 2012] fullrun_mos2_xmm0412591401_pi300-10000_cl_pass0_src6_1.ximg exists
[Thu Mar 29 00:24:05 2012] Fit fullrun_mos2_xmm0412591401_pi300-10000_cl_pass0_src6 appears to have run properly
[Thu Mar 29 00:24:09 2012] fullrun_mos2_xmm0412591401_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Thu Mar 29 00:24:09 2012] fullrun_mos2_xmm0412591401_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Thu Mar 29 00:24:09 2012] Fit fullrun_mos2_xmm0412591401_pi300-10000_cl_pass0_tfrozen_src6 appears to have run properly
[Thu Mar 29 00:25:25 2012] Source 46 is offset by -1.311700 and -1.663680 pixels which is larger than
2 X fitted extent = 1.167816 x 1.167816, not incorporating fit results
[Thu Mar 29 00:25:25 2012] Spatial fit model total counts = 10770.400000, observed total counts = 11109.000000
[Thu Mar 29 00:25:25 2012] Offset between fit and detection position for source 46 = 1.131236 pixels
[Thu Mar 29 00:25:25 2012] 9146.858000 total counts/ 8219.470000 bgd. counts: snr = 10.229150
Spatial fit parameters:
  Offset between fit and detection position for source 46 = 1.131236 pixels
  Position = (322.7, 404.0) = 5 34 29.02 22 7 11.9
  Extent = 10.7 (8.7-12.9)" x 6.3 (5.6-7.0)", rotation angle = 1 (351-12) degrees
  Source counts = 927.4 +/- 95.6
  Background counts = 8219.5
  Rate = 0.04 +/- 0.004
[Thu Mar 29 00:25:26 2012] Vigneting correction estimate = 1.000000
[Thu Mar 29 00:25:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar 29 00:25:26 2012] Assessing source extent using major axis lower bound
[Thu Mar 29 00:25:26 2012] Source does appear to be extended
[Thu Mar 29 00:25:26 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.25
[Thu Mar 29 00:25:26 2012] Source is confused with source 14
[Thu Mar 29 11:04:59 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Mar 29 11:04:59 2012] Initial guess for spatial extent in simple fitting = 8.50"
[Thu Mar 29 11:04:59 2012] source mask rpix=2.0, npix_max = 24, mask sum = 19, frac = 0.789
[Thu Mar 29 11:04:59 2012] Giving source the simple spatial ID 6 for pass 1, mean size = 8.50"
[Fri Mar 30 21:00:04 2012] fullrun_mos2_xmm0412591401_pi300-10000_cl_pass1_src6.ximg exists
[Fri Mar 30 21:00:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591401_pi300-10000_cl_pass1_src6.csv
[Fri Mar 30 21:00:05 2012] fullrun_mos2_xmm0412591401_pi300-10000_cl_pass1_src6_1.ximg exists
[Fri Mar 30 21:00:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591401_pi300-10000_cl_pass1_src6.csv
[Fri Mar 30 21:00:05 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412591401_pi300-10000_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412591401_pi300-10000_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 30 21:00:08 2012] fullrun_mos2_xmm0412591401_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Fri Mar 30 21:00:08 2012] fullrun_mos2_xmm0412591401_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Fri Mar 30 21:00:08 2012] Fit fullrun_mos2_xmm0412591401_pi300-10000_cl_pass1_tfrozen_src6 appears to have run properly
[Fri Mar 30 21:01:42 2012] Spatial fit model total counts = 13077.100000, observed total counts = 9413.000000
[Fri Mar 30 21:01:42 2012] Poor agreement between spatial fit and data for source 46
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Mar 30 21:01:42 2012] Warning, spatial fit 6 centroid is now closest to src. 6
[Fri Mar 30 21:01:44 2012] Vigneting correction estimate = 1.000000
[Fri Mar 30 21:01:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 30 21:01:44 2012] Assessing source extent using major axis lower bound
[Fri Mar 30 21:01:44 2012] Source does appear to be extended
[Fri Mar 30 21:01:44 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.25
[Sat Mar 31 03:06:22 2012] XMMSAS src. selection expression = ellipse(28024.578200, 35096.256680, 642.312018, 377.373011, 1.396950, X, Y)
[Sat Mar 31 03:06:22 2012] Writing source region out to fullrun_mos2_xmm0412591401_pi300-10000_pass1_cl_src46_src.reg
[Sat Mar 31 03:06:22 2012] Extracting stamp from image fullrun_mos2_xmm0412591401_pi300-10000_cl_sm2.00.img.gz, (286, 367) - (360, 441)
[Sat Mar 31 03:06:22 2012] XMMSAS bgd. selection expression = annulus(28024.578200, 35096.256680, 1070.520031, 2141.040062, X, Y) && !ellipse(24752.949066, 35182.918365, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(27894.900116, 34447.310638, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27143.029200, 34780.574000, 1063.080031, 1063.080031, 0.000000, X, Y) && !ellipse(27920.172000, 35925.192000, 1724.160050, 442.086413, 90.025000, X, Y) && !ellipse(27235.646200, 35028.640200, 531.540015, 531.540015, 0.000000, X, Y) && !ellipse(27942.074677, 36385.760803, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25893.223083, 34395.192413, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30113.004517, 34244.798279, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29598.252747, 34314.936188, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27183.632800, 35845.671800, 809.576023, 809.576023, 0.000000, X, Y) && !ellipse(30711.884000, 34238.080000, 1765.632051, 428.373612, 0.000000, X, Y) && !ellipse(28108.826000, 36990.346000, 677.118419, 677.118419, 0.000000, X, Y) && !ellipse(27247.576800, 36553.846000, 814.320023, 814.320023, 0.000000, X, Y) && !ellipse(28210.922800, 37827.455400, 986.048028, 986.048028, 0.000000, X, Y) && !ellipse(28031.477478, 37711.247009, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26417.299316, 35091.747314, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25728.799774, 35182.289124, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25023.541687, 35182.233368, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28993.360077, 35698.163971, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29804.087400, 35047.984600, 741.655221, 741.655221, 0.000000, X, Y) && !ellipse(27281.821400, 37428.802000, 659.837619, 659.837619, 0.000000, X, Y) && !ellipse(27523.719055, 38060.951538, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29378.793335, 35695.386810, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30030.061401, 35448.604492, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26076.951111, 35709.766449, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30587.758270, 35960.682648, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29227.002655, 36338.172058, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Mar 31 03:06:22 2012] Writing fullrun_mos2_xmm0412591401_pi300-10000_pass1_cl_src46.gif
[Sat Mar 31 03:28:21 2012] Mean detx,y = (-407.36, 7645.79) 
[Sat Mar 31 03:28:24 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Mar 31 03:28:35 2012] Binned source spectrum to 10 counts/bin
[Sat Mar 31 03:28:36 2012] Setting source spectrum file to fullrun_mos2_xmm0412591401_pi300-10000_pass1_cl_src46_src_b10.pi.gz
[Sat Mar 31 03:28:36 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0412591401_pi300-10000_pass1_cl_src46_bgd.pi.gz
[Sat Mar 31 11:26:47 2012] Updating aperture counts using extracted products
[Sat Mar 31 11:26:48 2012] Error reading totcts from fullrun_mos2_xmm0412591401_pi300-10000_pass1_cl_src46_src_b10.pi.gz
[Sat Mar 31 11:26:57 2012] Calculating source flux in energy range 0.30-8.00
[Sat Mar 31 11:26:57 2012] Using photon index=1.80, rate=0.0425, arf fullrun_mos2_xmm0412591401_pi300-10000_pass1_cl_src46.arf
[Sat Mar 31 11:26:57 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Mar 31 11:26:57 2012] Updating source flux to 8.7e-13
[Sat Mar 31 11:37:36 2012] Flag b found in src. 46 procflags, skipping spectral fitting
[Sat Mar 31 11:37:36 2012] Flag p found in src. 46 procflags, skipping spectral fitting
[Sat Mar 31 11:37:36 2012] Flag c found in src. 46 procflags, skipping spectral fitting