[Wed Mar 28 00:31:44 2012] Detection parameters:
  Position = (315.2, 410.0) = 5 34 31.36 22 7 34.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 878.1 +/- 46.9
  Background counts = 466.9
  Rate = 0.07 +/- 0.004

[Wed Mar 28 00:31:53 2012] Off-axis axis estimate = 8.18'
[Wed Mar 28 10:34:53 2012] Using EEF radius (= 10.52 ")to estimate initial spatial extent for simple fitting
[Wed Mar 28 10:34:53 2012] Initial guess for spatial extent in simple fitting = 10.52"
[Wed Mar 28 10:34:53 2012] source mask rpix=2.4, npix_max = 34, mask sum = 29, frac = 0.852
[Wed Mar 28 10:34:53 2012] Giving source the simple spatial ID 18 for pass 0, mean size = 10.52"
[Thu Mar 29 00:24:06 2012] fullrun_mos2_xmm0412591401_pi300-10000_cl_pass0_src18.ximg exists
[Thu Mar 29 00:24:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591401_pi300-10000_cl_pass0_src18.csv
[Thu Mar 29 00:24:06 2012] fullrun_mos2_xmm0412591401_pi300-10000_cl_pass0_src18_1.ximg exists
[Thu Mar 29 00:24:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591401_pi300-10000_cl_pass0_src18.csv
[Thu Mar 29 00:24:06 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412591401_pi300-10000_cl_pass0_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412591401_pi300-10000_cl_pass0_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 29 00:24:09 2012] fullrun_mos2_xmm0412591401_pi300-10000_cl_pass0_tfrozen_src18.ximg exists
[Thu Mar 29 00:24:09 2012] fullrun_mos2_xmm0412591401_pi300-10000_cl_pass0_tfrozen_src18_1.ximg exists
[Thu Mar 29 00:24:09 2012] Fit fullrun_mos2_xmm0412591401_pi300-10000_cl_pass0_tfrozen_src18 appears to have run properly
[Thu Mar 29 00:25:25 2012] Warning, spatial fit 18 centroid is now closest to src. 6
[Thu Mar 29 00:25:26 2012] Vigneting correction estimate = 1.000000
[Thu Mar 29 00:25:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar 29 00:25:26 2012] Assessing source extent using major
[Thu Mar 29 00:25:26 2012] Source does appear to be extended
[Thu Mar 29 00:25:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar 29 00:25:26 2012] Source is confused with source 14
[Thu Mar 29 11:04:59 2012] Using EEF radius (= 10.52 ")to estimate initial spatial extent for simple fitting
[Thu Mar 29 11:04:59 2012] Initial guess for spatial extent in simple fitting = 10.52"
[Thu Mar 29 11:04:59 2012] source mask rpix=2.4, npix_max = 34, mask sum = 29, frac = 0.852
[Thu Mar 29 11:04:59 2012] Giving source the simple spatial ID 18 for pass 1, mean size = 10.52"
[Fri Mar 30 21:00:05 2012] fullrun_mos2_xmm0412591401_pi300-10000_cl_pass1_src18.ximg exists
[Fri Mar 30 21:00:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591401_pi300-10000_cl_pass1_src18.csv
[Fri Mar 30 21:00:05 2012] fullrun_mos2_xmm0412591401_pi300-10000_cl_pass1_src18_1.ximg exists
[Fri Mar 30 21:00:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591401_pi300-10000_cl_pass1_src18.csv
[Fri Mar 30 21:00:05 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412591401_pi300-10000_cl_pass1_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412591401_pi300-10000_cl_pass1_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 30 21:00:08 2012] fullrun_mos2_xmm0412591401_pi300-10000_cl_pass1_tfrozen_src18.ximg exists
[Fri Mar 30 21:00:08 2012] fullrun_mos2_xmm0412591401_pi300-10000_cl_pass1_tfrozen_src18_1.ximg exists
[Fri Mar 30 21:00:08 2012] Fit fullrun_mos2_xmm0412591401_pi300-10000_cl_pass1_tfrozen_src18 appears to have run properly
[Fri Mar 30 21:01:42 2012] Spatial fit model total counts = 10020.100000, observed total counts = 10109.000000
[Fri Mar 30 21:01:42 2012] Offset between fit and detection position for source 36 = 3.408444 pixels
[Fri Mar 30 21:01:42 2012] 9498.483000 total counts/ 9110.610000 bgd. counts: snr = 4.063646
Spatial fit parameters:
  Offset between fit and detection position for source 36 = 3.408444 pixels
  Position = (313.0, 412.6) = 5 34 32.05 22 7 49.4
  Extent = 10.1 (7.7-14.2)", rotation angle = 0
  Source counts = 387.9 +/- 97.5
  Background counts = 9110.6
  Rate = 0.02 +/- 0.004
[Fri Mar 30 21:01:44 2012] Vigneting correction estimate = 1.000000
[Fri Mar 30 21:01:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 30 21:01:44 2012] Assessing source extent using major axis lower bound
[Fri Mar 30 21:01:44 2012] Source does appear to be extended
[Fri Mar 30 21:01:44 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Mar 31 03:06:23 2012] XMMSAS src. selection expression = ellipse(27183.632800, 35845.671800, 607.182017, 607.182017, 0.000000, X, Y)
[Sat Mar 31 03:06:23 2012] Writing source region out to fullrun_mos2_xmm0412591401_pi300-10000_pass1_cl_src36_src.reg
[Sat Mar 31 03:06:23 2012] Extracting stamp from image fullrun_mos2_xmm0412591401_pi300-10000_cl_sm2.00.img.gz, (278, 378) - (348, 447)
[Sat Mar 31 03:06:23 2012] XMMSAS bgd. selection expression = annulus(27183.632800, 35845.671800, 1011.970029, 2023.940058, X, Y) && !ellipse(24752.949066, 35182.918365, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(27894.900116, 34447.310638, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27143.029200, 34780.574000, 1063.080031, 1063.080031, 0.000000, X, Y) && !ellipse(27920.172000, 35925.192000, 1724.160050, 442.086413, 90.025000, X, Y) && !ellipse(28024.578200, 35096.256680, 856.416025, 503.164014, 1.396950, X, Y) && !ellipse(27235.646200, 35028.640200, 531.540015, 531.540015, 0.000000, X, Y) && !ellipse(27942.074677, 36385.760803, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25893.223083, 34395.192413, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25002.657227, 34448.051392, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29598.252747, 34314.936188, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30711.884000, 34238.080000, 1765.632051, 428.373612, 0.000000, X, Y) && !ellipse(28108.826000, 36990.346000, 677.118419, 677.118419, 0.000000, X, Y) && !ellipse(27247.576800, 36553.846000, 814.320023, 814.320023, 0.000000, X, Y) && !ellipse(28210.922800, 37827.455400, 986.048028, 986.048028, 0.000000, X, Y) && !ellipse(28031.477478, 37711.247009, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26417.299316, 35091.747314, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25728.799774, 35182.289124, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25023.541687, 35182.233368, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28993.360077, 35698.163971, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29804.087400, 35047.984600, 741.655221, 741.655221, 0.000000, X, Y) && !ellipse(27281.821400, 37428.802000, 659.837619, 659.837619, 0.000000, X, Y) && !ellipse(27523.719055, 38060.951538, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29378.793335, 35695.386810, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27520.525055, 38575.581177, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30030.061401, 35448.604492, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26076.951111, 35709.766449, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29227.002655, 36338.172058, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Mar 31 03:06:23 2012] Writing fullrun_mos2_xmm0412591401_pi300-10000_pass1_cl_src36.gif
[Sat Mar 31 03:39:04 2012] Mean detx,y = (473.51, 8364.17) 
[Sat Mar 31 03:39:06 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Mar 31 03:39:28 2012] Binned source spectrum to 10 counts/bin
[Sat Mar 31 03:39:28 2012] Setting source spectrum file to fullrun_mos2_xmm0412591401_pi300-10000_pass1_cl_src36_src_b10.pi.gz
[Sat Mar 31 03:39:28 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0412591401_pi300-10000_pass1_cl_src36_bgd.pi.gz
[Sat Mar 31 11:26:48 2012] Updating aperture counts using extracted products
[Sat Mar 31 11:26:48 2012] Error reading totcts from fullrun_mos2_xmm0412591401_pi300-10000_pass1_cl_src36_src_b10.pi.gz
[Sat Mar 31 11:26:58 2012] Calculating source flux in energy range 0.30-8.00
[Sat Mar 31 11:26:58 2012] Using photon index=1.80, rate=0.0178, arf fullrun_mos2_xmm0412591401_pi300-10000_pass1_cl_src36.arf
[Sat Mar 31 11:26:58 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Mar 31 11:26:58 2012] Updating source flux to 4.2e-13
[Sat Mar 31 11:37:36 2012] Flag c found in src. 36 procflags, skipping spectral fitting