[Wed Mar 28 00:31:44 2012] Detection parameters:
  Position = (316.9, 432.0) = 5 34 30.81 22 9 10.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 760.2 +/- 44.8
  Background counts = 360.6
  Rate = 0.03 +/- 0.002

[Wed Mar 28 00:31:53 2012] Off-axis axis estimate = 9.78'
[Wed Mar 28 10:34:54 2012] Using EEF radius (= 11.32 ")to estimate initial spatial extent for simple fitting
[Wed Mar 28 10:34:54 2012] Initial guess for spatial extent in simple fitting = 11.32"
[Wed Mar 28 10:34:54 2012] source mask rpix=2.6, npix_max = 38, mask sum = 33, frac = 0.857
[Wed Mar 28 10:34:54 2012] Giving source the simple spatial ID 69 for pass 0, mean size = 11.32"
[Thu Mar 29 00:24:07 2012] fullrun_mos2_xmm0412591401_pi300-10000_cl_pass0_src69.ximg exists
[Thu Mar 29 00:24:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591401_pi300-10000_cl_pass0_src69.csv
[Thu Mar 29 00:24:07 2012] fullrun_mos2_xmm0412591401_pi300-10000_cl_pass0_src69_1.ximg exists
[Thu Mar 29 00:24:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591401_pi300-10000_cl_pass0_src69.csv
[Thu Mar 29 00:24:07 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412591401_pi300-10000_cl_pass0_src69_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412591401_pi300-10000_cl_pass0_src69.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 29 00:24:11 2012] fullrun_mos2_xmm0412591401_pi300-10000_cl_pass0_tfrozen_src69.ximg exists
[Thu Mar 29 00:24:11 2012] fullrun_mos2_xmm0412591401_pi300-10000_cl_pass0_tfrozen_src69_1.ximg exists
[Thu Mar 29 00:24:11 2012] Fit fullrun_mos2_xmm0412591401_pi300-10000_cl_pass0_tfrozen_src69 appears to have run properly
[Thu Mar 29 00:25:25 2012] Source 26 is offset by 4.944492 and 2.042965 pixels which is larger than
2 X fitted extent = 1.249674 x 1.249674, not incorporating fit results
[Thu Mar 29 00:25:26 2012] Spatial fit model total counts = 8045.310000, observed total counts = 8228.000000
[Thu Mar 29 00:25:26 2012] Offset between fit and detection position for source 26 = 2.843547 pixels
[Thu Mar 29 00:25:26 2012] 7309.496000 total counts/ 6907.250000 bgd. counts: snr = 4.839931
Spatial fit parameters:
  Offset between fit and detection position for source 26 = 2.843547 pixels
  Position = (314.4, 430.8) = 5 34 31.62 22 9 8.8
  Extent = 7.9 (6.8-9.2)", rotation angle = 0
  Source counts = 402.2 +/- 85.5
  Background counts = 6907.2
  Rate = 0.02 +/- 0.004
[Thu Mar 29 00:25:26 2012] Spatial fit model total counts = 7390.230000, observed total counts = 7408.000000
[Thu Mar 29 00:25:26 2012] Offset between fit and detection position for source 26 = 0.241442 pixels
[Thu Mar 29 00:25:26 2012] Warning, changing simple spatial fit ID from 69 to 76
[Thu Mar 29 00:25:26 2012] 7237.813000 total counts/ 6999.720000 bgd. counts: snr = 2.845813
Spatial fit parameters:
  Offset between fit and detection position for source 26 = 0.241442 pixels
  Position = (314.1, 430.8) = 5 34 31.69 22 9 8.6
  Extent = 8.2 (5.8-10.9)", rotation angle = 0
  Source counts = 238.1 +/- 85.1
  Background counts = 6999.7
  Rate = 0.01 +/- 0.004
[Thu Mar 29 00:25:26 2012] Vigneting correction estimate = 1.000000
[Thu Mar 29 00:25:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar 29 00:25:26 2012] Assessing source extent using major axis lower bound
[Thu Mar 29 00:25:26 2012] Source does appear to be extended
[Thu Mar 29 00:25:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar 29 00:25:26 2012] Source is confused with source 12
[Thu Mar 29 11:04:59 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Mar 29 11:04:59 2012] Initial guess for spatial extent in simple fitting = 8.25"
[Thu Mar 29 11:04:59 2012] source mask rpix=1.9, npix_max = 22, mask sum = 23, frac = 1.002
[Thu Mar 29 11:04:59 2012] Giving source the simple spatial ID 68 for pass 1, mean size = 8.25"
[Fri Mar 30 21:00:06 2012] fullrun_mos2_xmm0412591401_pi300-10000_cl_pass1_src68.ximg exists
[Fri Mar 30 21:00:07 2012] fullrun_mos2_xmm0412591401_pi300-10000_cl_pass1_src68_1.ximg exists
[Fri Mar 30 21:00:07 2012] Fit fullrun_mos2_xmm0412591401_pi300-10000_cl_pass1_src68 appears to have run properly
[Fri Mar 30 21:00:10 2012] fullrun_mos2_xmm0412591401_pi300-10000_cl_pass1_tfrozen_src68.ximg exists
[Fri Mar 30 21:00:10 2012] fullrun_mos2_xmm0412591401_pi300-10000_cl_pass1_tfrozen_src68_1.ximg exists
[Fri Mar 30 21:00:10 2012] Fit fullrun_mos2_xmm0412591401_pi300-10000_cl_pass1_tfrozen_src68 appears to have run properly
[Fri Mar 30 21:01:43 2012] Warning, spatial fit 68 centroid is now closest to src. 24
[Fri Mar 30 21:01:44 2012] Vigneting correction estimate = 1.000000
[Fri Mar 30 21:01:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 30 21:01:44 2012] Assessing source extent using major axis lower bound
[Fri Mar 30 21:01:44 2012] Source does appear to be extended
[Fri Mar 30 21:01:44 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Mar 31 03:06:28 2012] XMMSAS src. selection expression = ellipse(27281.821400, 37428.802000, 494.878214, 494.878214, 0.000000, X, Y)
[Sat Mar 31 03:06:28 2012] Writing source region out to fullrun_mos2_xmm0412591401_pi300-10000_pass1_cl_src26_src.reg
[Sat Mar 31 03:06:28 2012] Extracting stamp from image fullrun_mos2_xmm0412591401_pi300-10000_cl_sm2.00.img.gz, (286, 402) - (343, 459)
[Sat Mar 31 03:06:28 2012] XMMSAS bgd. selection expression = annulus(27281.821400, 37428.802000, 824.797024, 1649.594047, X, Y) && !ellipse(24752.949066, 35182.918365, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(27143.029200, 34780.574000, 1063.080031, 1063.080031, 0.000000, X, Y) && !ellipse(27920.172000, 35925.192000, 1724.160050, 442.086413, 90.025000, X, Y) && !ellipse(28024.578200, 35096.256680, 856.416025, 503.164014, 1.396950, X, Y) && !ellipse(27942.074677, 36385.760803, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27183.632800, 35845.671800, 809.576023, 809.576023, 0.000000, X, Y) && !ellipse(28108.826000, 36990.346000, 677.118419, 677.118419, 0.000000, X, Y) && !ellipse(28093.321075, 38754.729279, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27247.576800, 36553.846000, 814.320023, 814.320023, 0.000000, X, Y) && !ellipse(28154.057526, 39535.844208, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28210.922800, 37827.455400, 986.048028, 986.048028, 0.000000, X, Y) && !ellipse(28031.477478, 37711.247009, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26417.299316, 35091.747314, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25728.799774, 35182.289124, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25023.541687, 35182.233368, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28993.360077, 35698.163971, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27631.545105, 39187.918549, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27523.719055, 38060.951538, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29378.793335, 35695.386810, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27520.525055, 38575.581177, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26076.951111, 35709.766449, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29227.002655, 36338.172058, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Mar 31 03:06:28 2012] Writing fullrun_mos2_xmm0412591401_pi300-10000_pass1_cl_src26.gif
[Sat Mar 31 05:06:26 2012] Mean detx,y = (462.26, 9936.66) 
[Sat Mar 31 05:06:28 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Mar 31 05:06:43 2012] Binned source spectrum to 10 counts/bin
[Sat Mar 31 05:06:43 2012] Setting source spectrum file to fullrun_mos2_xmm0412591401_pi300-10000_pass1_cl_src26_src_b10.pi.gz
[Sat Mar 31 05:06:43 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0412591401_pi300-10000_pass1_cl_src26_bgd.pi.gz
[Sat Mar 31 11:26:51 2012] Updating aperture counts using extracted products
[Sat Mar 31 11:26:51 2012] Error reading totcts from fullrun_mos2_xmm0412591401_pi300-10000_pass1_cl_src26_src_b10.pi.gz
[Sat Mar 31 11:27:00 2012] Calculating source flux in energy range 0.30-8.00
[Sat Mar 31 11:27:00 2012] Using photon index=1.80, rate=0.0109, arf fullrun_mos2_xmm0412591401_pi300-10000_pass1_cl_src26.arf
[Sat Mar 31 11:27:00 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Mar 31 11:27:01 2012] Updating source flux to 3e-13
[Sat Mar 31 11:37:36 2012] Flag b found in src. 26 procflags, skipping spectral fitting
[Sat Mar 31 11:37:36 2012] Flag c found in src. 26 procflags, skipping spectral fitting