[Wed Mar 28 00:31:43 2012] Detection parameters:
  Position = (319.6, 499.0) = 5 34 29.97 22 14 0.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 484.3 +/- 37.5
  Background counts = 172.1
  Rate = 0.02 +/- 0.002

[Wed Mar 28 00:31:53 2012] Off-axis axis estimate = 14.62'
[Wed Mar 28 10:34:54 2012] Using EEF radius (= 13.74 ")to estimate initial spatial extent for simple fitting
[Wed Mar 28 10:34:54 2012] Initial guess for spatial extent in simple fitting = 13.74"
[Wed Mar 28 10:34:54 2012] source mask rpix=3.2, npix_max = 53, mask sum = 56, frac = 1.046
[Wed Mar 28 10:34:54 2012] Giving source the simple spatial ID 94 for pass 0, mean size = 13.74"
[Thu Mar 29 00:24:08 2012] fullrun_mos2_xmm0412591401_pi300-10000_cl_pass0_src94.ximg exists
[Thu Mar 29 00:24:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591401_pi300-10000_cl_pass0_src94.csv
[Thu Mar 29 00:24:08 2012] fullrun_mos2_xmm0412591401_pi300-10000_cl_pass0_src94_1.ximg exists
[Thu Mar 29 00:24:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591401_pi300-10000_cl_pass0_src94.csv
[Thu Mar 29 00:24:08 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412591401_pi300-10000_cl_pass0_src94_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412591401_pi300-10000_cl_pass0_src94.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 29 00:24:11 2012] fullrun_mos2_xmm0412591401_pi300-10000_cl_pass0_tfrozen_src94.ximg exists
[Thu Mar 29 00:24:11 2012] fullrun_mos2_xmm0412591401_pi300-10000_cl_pass0_tfrozen_src94_1.ximg exists
[Thu Mar 29 00:24:11 2012] Fit fullrun_mos2_xmm0412591401_pi300-10000_cl_pass0_tfrozen_src94 appears to have run properly
[Thu Mar 29 00:25:25 2012] Source 17 is offset by 6.417519 and -1.789955 pixels which is larger than
2 X fitted extent = 1.536276 x 1.536276, not incorporating fit results
[Thu Mar 29 00:25:26 2012] Warning, spatial fit 94 centroid is now closest to src. 152
[Thu Mar 29 00:25:26 2012] Vigneting correction estimate = 1.000000
[Thu Mar 29 00:25:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar 29 00:25:26 2012] Assessing source extent using major
[Thu Mar 29 00:25:26 2012] Source does appear to be extended
[Thu Mar 29 00:25:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar 29 00:25:26 2012] Source is confused with source 16
[Thu Mar 29 11:04:59 2012] Using EEF radius (= 13.74 ")to estimate initial spatial extent for simple fitting
[Thu Mar 29 11:04:59 2012] Initial guess for spatial extent in simple fitting = 13.74"
[Thu Mar 29 11:04:59 2012] source mask rpix=3.2, npix_max = 53, mask sum = 56, frac = 1.046
[Thu Mar 29 11:04:59 2012] Giving source the simple spatial ID 93 for pass 1, mean size = 13.74"
[Fri Mar 30 21:00:07 2012] fullrun_mos2_xmm0412591401_pi300-10000_cl_pass1_src93.ximg exists
[Fri Mar 30 21:00:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591401_pi300-10000_cl_pass1_src93.csv
[Fri Mar 30 21:00:07 2012] fullrun_mos2_xmm0412591401_pi300-10000_cl_pass1_src93_1.ximg exists
[Fri Mar 30 21:00:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591401_pi300-10000_cl_pass1_src93.csv
[Fri Mar 30 21:00:07 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412591401_pi300-10000_cl_pass1_src93_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412591401_pi300-10000_cl_pass1_src93.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 30 21:00:10 2012] fullrun_mos2_xmm0412591401_pi300-10000_cl_pass1_tfrozen_src93.ximg exists
[Fri Mar 30 21:00:10 2012] fullrun_mos2_xmm0412591401_pi300-10000_cl_pass1_tfrozen_src93_1.ximg exists
[Fri Mar 30 21:00:10 2012] Fit fullrun_mos2_xmm0412591401_pi300-10000_cl_pass1_tfrozen_src93 appears to have run properly
[Fri Mar 30 21:01:43 2012] Source 17 is offset by 1.065335 and -1.789955 pixels which is larger than
2 X fitted extent = 1.536276 x 1.536276, not incorporating fit results
[Fri Mar 30 21:01:43 2012] Warning: source 58 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 17 at 25.807298 pixels away
[Fri Mar 30 21:01:44 2012] Warning, spatial fit 93 centroid is now closest to src. 16
[Fri Mar 30 21:01:44 2012] Vigneting correction estimate = 1.000000
[Fri Mar 30 21:01:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 30 21:01:44 2012] Assessing source extent using major
[Fri Mar 30 21:01:44 2012] Source does appear to be extended
[Fri Mar 30 21:01:44 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Mar 31 03:06:31 2012] XMMSAS src. selection expression = ellipse(27759.074127, 43364.523895, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Mar 31 03:06:31 2012] Writing source region out to fullrun_mos2_xmm0412591401_pi300-10000_pass1_cl_src17_src.reg
[Sat Mar 31 03:06:31 2012] Extracting stamp from image fullrun_mos2_xmm0412591401_pi300-10000_cl_sm2.00.img.gz, (282, 462) - (357, 537)
[Sat Mar 31 03:06:31 2012] XMMSAS bgd. selection expression = annulus(27759.074127, 43364.523895, 1087.500000, 2175.000000, X, Y) && !ellipse(28246.845490, 42400.363281, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28263.978400, 41162.836000, 613.126418, 613.126418, 0.000000, X, Y) && !ellipse(28180.493652, 40566.776154, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28308.521820, 43358.916473, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27719.528800, 41969.554000, 2146.520062, 2146.520062, 0.000000, X, Y) && !ellipse(27808.396606, 41455.709167, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27697.153534, 40927.167175, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28309.772339, 44023.834045, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27797.112732, 42578.887451, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Mar 31 03:06:31 2012] Writing fullrun_mos2_xmm0412591401_pi300-10000_pass1_cl_src17.gif
[Sat Mar 31 05:41:05 2012] Mean detx,y = (296.12, 15872.20) 
[Sat Mar 31 05:41:07 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Mar 31 05:41:34 2012] Binned source spectrum to 10 counts/bin
[Sat Mar 31 05:41:35 2012] Setting source spectrum file to fullrun_mos2_xmm0412591401_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Sat Mar 31 05:41:35 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0412591401_pi300-10000_pass1_cl_src17_bgd.pi.gz
[Sat Mar 31 10:21:11 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Mar 31 10:21:11 2012] rmf not generated due to insufficient counts
[Sat Mar 31 11:26:52 2012] Updating aperture counts using extracted products
[Sat Mar 31 11:26:52 2012] Error reading totcts from fullrun_mos2_xmm0412591401_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Sat Mar 31 11:27:02 2012] Calculating source flux in energy range 0.30-8.00
[Sat Mar 31 11:27:02 2012] Using photon index=1.80, rate=0.0222, arf fullrun_mos2_xmm0412591401_pi300-10000_pass1_cl_src17.arf
[Sat Mar 31 11:27:02 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Mar 31 11:27:02 2012] Updating source flux to 1.2e-12
[Sat Mar 31 11:37:36 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting