[Wed Mar 28 00:31:43 2012] Detection parameters:
  Position = (325.9, 498.9) = 5 34 27.99 22 14 6.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 966.5 +/- 46.0
  Background counts = 173.9
  Rate = 0.04 +/- 0.002

[Wed Mar 28 00:31:53 2012] Off-axis axis estimate = 14.67'
[Wed Mar 28 10:34:54 2012] Using EEF radius (= 13.76 ")to estimate initial spatial extent for simple fitting
[Wed Mar 28 10:34:54 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Mar 28 10:34:54 2012] Initial guess for spatial extent in simple fitting = 13.76"
[Wed Mar 28 10:34:54 2012] source mask rpix=3.2, npix_max = 53, mask sum = 54, frac = 1.005
[Wed Mar 28 10:34:54 2012] Giving source the simple spatial ID 53 for pass 0, mean size = 13.76"
[Thu Mar 29 00:24:07 2012] fullrun_mos2_xmm0412591401_pi300-10000_cl_pass0_src53.ximg exists
[Thu Mar 29 00:24:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591401_pi300-10000_cl_pass0_src53.csv
[Thu Mar 29 00:24:07 2012] fullrun_mos2_xmm0412591401_pi300-10000_cl_pass0_src53_1.ximg exists
[Thu Mar 29 00:24:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591401_pi300-10000_cl_pass0_src53.csv
[Thu Mar 29 00:24:07 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412591401_pi300-10000_cl_pass0_src53_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412591401_pi300-10000_cl_pass0_src53.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 29 00:24:10 2012] fullrun_mos2_xmm0412591401_pi300-10000_cl_pass0_tfrozen_src53.ximg exists
[Thu Mar 29 00:24:10 2012] fullrun_mos2_xmm0412591401_pi300-10000_cl_pass0_tfrozen_src53_1.ximg exists
[Thu Mar 29 00:24:10 2012] Fit fullrun_mos2_xmm0412591401_pi300-10000_cl_pass0_tfrozen_src53 appears to have run properly
[Thu Mar 29 00:25:26 2012] Warning, spatial fit 53 centroid is now closest to src. 152
[Thu Mar 29 00:25:26 2012] Warning: source 80 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 16 at 13.842782 pixels away
[Thu Mar 29 00:25:26 2012] Vigneting correction estimate = 1.000000
[Thu Mar 29 00:25:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar 29 00:25:26 2012] Assessing source extent using major
[Thu Mar 29 00:25:26 2012] Source does appear to be extended
[Thu Mar 29 00:25:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar 29 00:25:26 2012] Source is confused with source 8
[Thu Mar 29 00:25:26 2012] Source is confused with source 17
[Thu Mar 29 11:04:59 2012] Using EEF radius (= 13.76 ")to estimate initial spatial extent for simple fitting
[Thu Mar 29 11:04:59 2012] Initial guess for spatial extent in simple fitting = 13.76"
[Thu Mar 29 11:04:59 2012] source mask rpix=3.2, npix_max = 53, mask sum = 54, frac = 1.005
[Thu Mar 29 11:04:59 2012] Giving source the simple spatial ID 53 for pass 1, mean size = 13.76"
[Fri Mar 30 21:00:06 2012] fullrun_mos2_xmm0412591401_pi300-10000_cl_pass1_src53.ximg exists
[Fri Mar 30 21:00:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591401_pi300-10000_cl_pass1_src53.csv
[Fri Mar 30 21:00:06 2012] fullrun_mos2_xmm0412591401_pi300-10000_cl_pass1_src53_1.ximg exists
[Fri Mar 30 21:00:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591401_pi300-10000_cl_pass1_src53.csv
[Fri Mar 30 21:00:06 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412591401_pi300-10000_cl_pass1_src53_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412591401_pi300-10000_cl_pass1_src53.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 30 21:00:09 2012] fullrun_mos2_xmm0412591401_pi300-10000_cl_pass1_tfrozen_src53.ximg exists
[Fri Mar 30 21:00:09 2012] fullrun_mos2_xmm0412591401_pi300-10000_cl_pass1_tfrozen_src53_1.ximg exists
[Fri Mar 30 21:00:09 2012] Fit fullrun_mos2_xmm0412591401_pi300-10000_cl_pass1_tfrozen_src53 appears to have run properly
[Fri Mar 30 21:01:43 2012] Warning, spatial fit 53 centroid is now closest to src. 7
[Fri Mar 30 21:01:43 2012] Warning: source 79 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 16 at 13.842782 pixels away
[Fri Mar 30 21:01:44 2012] Source 16 is offset by -6.190416 and 0.328608 pixels which is larger than
2 X fitted extent = 1.579568 x 1.579568, not incorporating fit results
[Fri Mar 30 21:01:44 2012] Vigneting correction estimate = 1.000000
[Fri Mar 30 21:01:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 30 21:01:44 2012] Assessing source extent using major
[Fri Mar 30 21:01:44 2012] Source does appear to be extended
[Fri Mar 30 21:01:44 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Mar 31 03:06:26 2012] XMMSAS src. selection expression = ellipse(28308.521820, 43358.916473, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Mar 31 03:06:26 2012] Writing source region out to fullrun_mos2_xmm0412591401_pi300-10000_pass1_cl_src16_src.reg
[Sat Mar 31 03:06:26 2012] Extracting stamp from image fullrun_mos2_xmm0412591401_pi300-10000_cl_sm2.00.img.gz, (288, 461) - (363, 536)
[Sat Mar 31 03:06:26 2012] XMMSAS bgd. selection expression = annulus(28308.521820, 43358.916473, 1087.500000, 2175.000000, X, Y) && !ellipse(28246.845490, 42400.363281, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28263.978400, 41162.836000, 613.126418, 613.126418, 0.000000, X, Y) && !ellipse(28180.493652, 40566.776154, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27719.528800, 41969.554000, 2146.520062, 2146.520062, 0.000000, X, Y) && !ellipse(27808.396606, 41455.709167, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27697.153534, 40927.167175, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28309.772339, 44023.834045, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27797.112732, 42578.887451, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27759.074127, 43364.523895, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Mar 31 03:06:26 2012] Writing fullrun_mos2_xmm0412591401_pi300-10000_pass1_cl_src16.gif
[Sat Mar 31 04:23:32 2012] Mean detx,y = (-208.98, 15878.56) 
[Sat Mar 31 04:23:35 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Mar 31 04:24:01 2012] Binned source spectrum to 10 counts/bin
[Sat Mar 31 04:24:01 2012] Setting source spectrum file to fullrun_mos2_xmm0412591401_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Sat Mar 31 04:24:01 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0412591401_pi300-10000_pass1_cl_src16_bgd.pi.gz
[Sat Mar 31 08:37:10 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Mar 31 08:37:10 2012] rmf not generated due to insufficient counts
[Sat Mar 31 11:26:50 2012] Updating aperture counts using extracted products
[Sat Mar 31 11:26:50 2012] Error reading totcts from fullrun_mos2_xmm0412591401_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Sat Mar 31 11:26:59 2012] Calculating source flux in energy range 0.30-8.00
[Sat Mar 31 11:26:59 2012] Using photon index=1.80, rate=0.0442, arf fullrun_mos2_xmm0412591401_pi300-10000_pass1_cl_src16.arf
[Sat Mar 31 11:26:59 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Mar 31 11:26:59 2012] Updating source flux to 1.8e-12
[Sat Mar 31 11:37:36 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting