[Wed Mar 28 00:31:51 2012] Detection parameters:
  Position = (333.7, 212.0) = 5 34 25.57 21 53 26.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 362.1 +/- 31.0
  Background counts = 538.0
  Rate = 0.03 +/- 0.002

[Wed Mar 28 00:31:53 2012] Off-axis axis estimate = 6.77'
[Wed Mar 28 10:34:54 2012] Using EEF radius (= 9.81 ")to estimate initial spatial extent for simple fitting
[Wed Mar 28 10:34:54 2012] Initial guess for spatial extent in simple fitting = 9.81"
[Wed Mar 28 10:34:54 2012] source mask rpix=2.3, npix_max = 30, mask sum = 31, frac = 1.021
[Wed Mar 28 10:34:54 2012] Giving source the simple spatial ID 85 for pass 0, mean size = 9.81"
[Thu Mar 29 00:24:08 2012] fullrun_mos2_xmm0412591401_pi300-10000_cl_pass0_src85.ximg exists
[Thu Mar 29 00:24:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591401_pi300-10000_cl_pass0_src85.csv
[Thu Mar 29 00:24:08 2012] fullrun_mos2_xmm0412591401_pi300-10000_cl_pass0_src85_1.ximg exists
[Thu Mar 29 00:24:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591401_pi300-10000_cl_pass0_src85.csv
[Thu Mar 29 00:24:08 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412591401_pi300-10000_cl_pass0_src85_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412591401_pi300-10000_cl_pass0_src85.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 29 00:24:11 2012] fullrun_mos2_xmm0412591401_pi300-10000_cl_pass0_tfrozen_src85.ximg exists
[Thu Mar 29 00:24:11 2012] fullrun_mos2_xmm0412591401_pi300-10000_cl_pass0_tfrozen_src85_1.ximg exists
[Thu Mar 29 00:24:11 2012] Fit fullrun_mos2_xmm0412591401_pi300-10000_cl_pass0_tfrozen_src85 appears to have run properly
[Thu Mar 29 00:25:26 2012] Warning, spatial fit 85 centroid is now closest to src. 173
[Thu Mar 29 00:25:26 2012] Spatial fit model total counts = 7374.850000, observed total counts = 7502.000000
[Thu Mar 29 00:25:26 2012] Offset between fit and detection position for source 140 = 1.311540 pixels
[Thu Mar 29 00:25:26 2012] Warning, changing simple spatial fit ID from 85 to 100
[Thu Mar 29 00:25:26 2012] 7231.833000 total counts/ 6318.290000 bgd. counts: snr = 11.492889
Spatial fit parameters:
  Offset between fit and detection position for source 140 = 1.311540 pixels
  Position = (333.4, 210.8) = 5 34 25.68 21 53 11.5
  Extent = 19.3 (18.8-38.5)" x 7.3 (6.2-8.9)", rotation angle = 0
  Source counts = 913.5 +/- 85.0
  Background counts = 6318.3
  Rate = 0.04 +/- 0.004
[Thu Mar 29 00:25:26 2012] Vigneting correction estimate = 1.000000
[Thu Mar 29 00:25:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar 29 00:25:26 2012] Assessing source extent using major axis lower bound
[Thu Mar 29 00:25:26 2012] Source does appear to be extended
[Thu Mar 29 00:25:26 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 2.12
[Thu Mar 29 00:25:26 2012] Source is asymmetric
[Thu Mar 29 00:25:26 2012] Source is confused with source 131
[Thu Mar 29 11:04:59 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Mar 29 11:04:59 2012] Initial guess for spatial extent in simple fitting = 13.27"
[Thu Mar 29 11:04:59 2012] source mask rpix=3.0, npix_max = 50, mask sum = 49, frac = 0.972
[Thu Mar 29 11:04:59 2012] Giving source the simple spatial ID 84 for pass 1, mean size = 13.27"
[Fri Mar 30 21:00:07 2012] fullrun_mos2_xmm0412591401_pi300-10000_cl_pass1_src84.ximg exists
[Fri Mar 30 21:00:07 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0412591401_pi300-10000_cl_pass1_src84.csv
[Fri Mar 30 21:00:07 2012] fullrun_mos2_xmm0412591401_pi300-10000_cl_pass1_src84_1.ximg exists
[Fri Mar 30 21:00:07 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0412591401_pi300-10000_cl_pass1_src84.csv
[Fri Mar 30 21:00:07 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412591401_pi300-10000_cl_pass1_src84_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412591401_pi300-10000_cl_pass1_src84.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 30 21:00:10 2012] fullrun_mos2_xmm0412591401_pi300-10000_cl_pass1_tfrozen_src84.ximg exists
[Fri Mar 30 21:00:10 2012] fullrun_mos2_xmm0412591401_pi300-10000_cl_pass1_tfrozen_src84_1.ximg exists
[Fri Mar 30 21:00:10 2012] Fit fullrun_mos2_xmm0412591401_pi300-10000_cl_pass1_tfrozen_src84 appears to have run properly
[Fri Mar 30 21:01:43 2012] Warning, spatial fit 84 centroid is now closest to src. 135
[Fri Mar 30 21:01:44 2012] Vigneting correction estimate = 1.000000
[Fri Mar 30 21:01:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 30 21:01:44 2012] Assessing source extent using major axis lower bound
[Fri Mar 30 21:01:44 2012] Source does appear to be extended
[Fri Mar 30 21:01:44 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 2.12
[Fri Mar 30 21:01:44 2012] Source is asymmetric
[Sat Mar 31 03:06:29 2012] XMMSAS src. selection expression = ellipse(28959.262000, 18287.870000, 1155.876033, 435.992413, 0.047000, X, Y)
[Sat Mar 31 03:06:29 2012] Writing source region out to fullrun_mos2_xmm0412591401_pi300-10000_pass1_cl_src140_src.reg
[Sat Mar 31 03:06:29 2012] Extracting stamp from image fullrun_mos2_xmm0412591401_pi300-10000_cl_sm2.00.img.gz, (267, 144) - (400, 277)
[Sat Mar 31 03:06:29 2012] XMMSAS bgd. selection expression = annulus(28959.262000, 18287.870000, 1926.460055, 3852.920111, X, Y) && !ellipse(30184.695618, 19088.171921, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26071.946000, 18569.752000, 1494.272043, 1494.272043, 0.000000, X, Y) && !ellipse(27082.561400, 19369.402600, 548.219216, 548.219216, 0.000000, X, Y) && !ellipse(26786.651062, 19385.187393, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28744.950226, 20228.678253, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27607.537000, 20264.568000, 961.440028, 961.440028, 0.000000, X, Y) && !ellipse(27363.943000, 19419.678000, 869.344025, 869.344025, 0.000000, X, Y) && !ellipse(27201.366638, 20269.881653, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27218.650879, 18563.319092, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29196.100474, 19993.140592, 1433.944041, 516.825306, 0.000000, X, Y) && !ellipse(25421.241180, 20399.840027, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29392.056000, 19123.728000, 1516.920044, 1516.920044, 0.000000, X, Y) && !ellipse(26698.344788, 18596.005157, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28388.020200, 19155.411400, 1503.272043, 1503.272043, 0.000000, X, Y) && !ellipse(27673.714000, 19265.695000, 1498.696043, 1498.696043, 0.000000, X, Y) && !ellipse(28191.388000, 19188.462000, 1539.240044, 352.554410, 2.009000, X, Y) && !ellipse(25198.237305, 19531.304276, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27457.797000, 17853.804000, 2992.592086, 2992.592086, 0.000000, X, Y) && !ellipse(29858.290000, 19230.603200, 1565.384045, 510.788815, 15.133000, X, Y) && !ellipse(26612.852844, 18988.172897, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28976.805969, 18862.194412, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31374.533722, 20013.980637, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24392.292542, 20323.511917, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32967.997345, 20048.801346, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26315.399292, 17871.563156, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30670.712006, 20141.715424, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26896.375458, 15526.219131, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30845.168671, 19173.324020, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26522.061462, 16933.923630, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32186.736389, 19537.413498, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26531.300964, 14653.822968, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27354.715820, 16659.420151, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26996.863007, 17176.581360, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27947.267914, 18054.145538, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31652.509979, 19450.886093, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32642.939453, 19616.663467, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33479.313507, 19623.429810, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26528.303436, 16573.178162, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28700.954000, 18024.964000, 1569.944045, 1569.944045, 0.000000, X, Y) && !ellipse(26842.783691, 14039.025711, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Mar 31 03:06:29 2012] Writing fullrun_mos2_xmm0412591401_pi300-10000_pass1_cl_src140.gif
[Sat Mar 31 05:24:37 2012] Mean detx,y = (-2233.02, -9083.10) 
[Sat Mar 31 05:24:40 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Mar 31 05:25:02 2012] Binned source spectrum to 10 counts/bin
[Sat Mar 31 05:25:03 2012] Setting source spectrum file to fullrun_mos2_xmm0412591401_pi300-10000_pass1_cl_src140_src_b10.pi.gz
[Sat Mar 31 05:25:03 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0412591401_pi300-10000_pass1_cl_src140_bgd.pi.gz
[Sat Mar 31 11:26:51 2012] Updating aperture counts using extracted products
[Sat Mar 31 11:26:51 2012] Error reading totcts from fullrun_mos2_xmm0412591401_pi300-10000_pass1_cl_src140_src_b10.pi.gz
[Sat Mar 31 11:27:01 2012] Calculating source flux in energy range 0.30-8.00
[Sat Mar 31 11:27:01 2012] Using photon index=1.80, rate=0.0418, arf fullrun_mos2_xmm0412591401_pi300-10000_pass1_cl_src140.arf
[Sat Mar 31 11:27:01 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Mar 31 11:27:01 2012] Updating source flux to 8.3e-13
[Sat Mar 31 11:37:36 2012] Flag c found in src. 140 procflags, skipping spectral fitting