[Wed Mar 28 00:31:43 2012] Detection parameters: Position = (321.1, 412.0) = 5 34 29.51 22 7 45.5 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 1680.0 +/- 70.9 Background counts = 459.8 Rate = 0.1 +/- 0.006 [Wed Mar 28 00:31:53 2012] Off-axis axis estimate = 8.40' [Wed Mar 28 10:34:53 2012] Using EEF radius (= 10.63 ")to estimate initial spatial extent for simple fitting [Wed Mar 28 10:34:53 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Wed Mar 28 10:34:53 2012] Initial guess for spatial extent in simple fitting = 10.63" [Wed Mar 28 10:34:53 2012] source mask rpix=2.4, npix_max = 34, mask sum = 28, frac = 0.808 [Wed Mar 28 10:34:53 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 10.63" [Thu Mar 29 00:24:05 2012] fullrun_mos2_xmm0412591401_pi300-10000_cl_pass0_src5.ximg exists [Thu Mar 29 00:24:05 2012] fullrun_mos2_xmm0412591401_pi300-10000_cl_pass0_src5_1.ximg exists [Thu Mar 29 00:24:05 2012] Fit fullrun_mos2_xmm0412591401_pi300-10000_cl_pass0_src5 appears to have run properly [Thu Mar 29 00:24:08 2012] fullrun_mos2_xmm0412591401_pi300-10000_cl_pass0_tfrozen_src5.ximg exists [Thu Mar 29 00:24:08 2012] fullrun_mos2_xmm0412591401_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists [Thu Mar 29 00:24:09 2012] Fit fullrun_mos2_xmm0412591401_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly [Thu Mar 29 00:25:25 2012] Spatial fit model total counts = 10721.100000, observed total counts = 10721.000000 [Thu Mar 29 00:25:25 2012] Offset between fit and detection position for source 14 = 1.326289 pixels [Thu Mar 29 00:25:25 2012] 9288.748000 total counts/ 8552.490000 bgd. counts: snr = 7.961295 Spatial fit parameters: Offset between fit and detection position for source 14 = 1.326289 pixels Position = (322.0, 413.0) = 5 34 29.24 22 7 51.4 Extent = 7.0" x 7.0", rotation angle = 0 Source counts = 736.3 +/- 96.4 Background counts = 8552.5 Rate = 0.03 +/- 0.004 [Thu Mar 29 00:25:25 2012] Spatial fit model total counts = 9797.680000, observed total counts = 9841.000000 [Thu Mar 29 00:25:25 2012] Offset between fit and detection position for source 14 = 0.680394 pixels [Thu Mar 29 00:25:25 2012] Warning, changing simple spatial fit ID from 5 to 24 [Thu Mar 29 00:25:25 2012] 9549.721000 total counts/ 8956.340000 bgd. counts: snr = 6.270012 Spatial fit parameters: Offset between fit and detection position for source 14 = 0.680394 pixels Position = (321.5, 413.5) = 5 34 29.40 22 7 53.4 Extent = 21.6 (21.5-43.1)" x 5.5 (4.5-6.7)", rotation angle = 90 (90-96) degrees Source counts = 593.4 +/- 97.7 Background counts = 8956.3 Rate = 0.03 +/- 0.004 [Thu Mar 29 00:25:26 2012] Vigneting correction estimate = 1.000000 [Thu Mar 29 00:25:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Thu Mar 29 00:25:26 2012] Assessing source extent using major axis lower bound [Thu Mar 29 00:25:26 2012] Source does appear to be extended [Thu Mar 29 00:25:26 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 3.19 [Thu Mar 29 00:25:26 2012] Source is asymmetric [Thu Mar 29 00:25:26 2012] Source is confused with source 46 [Thu Mar 29 00:25:26 2012] Source is confused with source 44 [Thu Mar 29 00:25:26 2012] Source is confused with source 28 [Thu Mar 29 00:25:26 2012] Source is confused with source 36 [Thu Mar 29 00:25:26 2012] Source is confused with source 29 [Thu Mar 29 00:25:26 2012] Source is confused with source 31 [Thu Mar 29 11:04:59 2012] Using previous fit value to estimate initial spatial extent for simple fitting [Thu Mar 29 11:04:59 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Thu Mar 29 11:04:59 2012] Initial guess for spatial extent in simple fitting = 13.54" [Thu Mar 29 11:04:59 2012] source mask rpix=3.1, npix_max = 52, mask sum = 44, frac = 0.843 [Thu Mar 29 11:04:59 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 13.54" [Fri Mar 30 21:00:04 2012] fullrun_mos2_xmm0412591401_pi300-10000_cl_pass1_src5.ximg exists [Fri Mar 30 21:00:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591401_pi300-10000_cl_pass1_src5.csv [Fri Mar 30 21:00:04 2012] fullrun_mos2_xmm0412591401_pi300-10000_cl_pass1_src5_1.ximg exists [Fri Mar 30 21:00:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591401_pi300-10000_cl_pass1_src5.csv [Fri Mar 30 21:00:04 2012] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0412591401_pi300-10000_cl_pass1_src5_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0412591401_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Fri Mar 30 21:00:08 2012] fullrun_mos2_xmm0412591401_pi300-10000_cl_pass1_tfrozen_src5.ximg exists [Fri Mar 30 21:00:08 2012] fullrun_mos2_xmm0412591401_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists [Fri Mar 30 21:00:08 2012] Fit fullrun_mos2_xmm0412591401_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly [Fri Mar 30 21:01:42 2012] Warning, spatial fit 5 centroid is now closest to src. 27 [Fri Mar 30 21:01:44 2012] Vigneting correction estimate = 1.000000 [Fri Mar 30 21:01:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Fri Mar 30 21:01:44 2012] Assessing source extent using major axis lower bound [Fri Mar 30 21:01:44 2012] Source does appear to be extended [Fri Mar 30 21:01:44 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 3.19 [Fri Mar 30 21:01:44 2012] Source is asymmetric [Sat Mar 31 03:06:22 2012] XMMSAS src. selection expression = ellipse(27920.172000, 35925.192000, 1293.120037, 331.564810, 90.025000, X, Y) [Sat Mar 31 03:06:22 2012] Writing source region out to fullrun_mos2_xmm0412591401_pi300-10000_pass1_cl_src14_src.reg [Sat Mar 31 03:06:22 2012] Extracting stamp from image fullrun_mos2_xmm0412591401_pi300-10000_cl_sm2.00.img.gz, (247, 339) - (396, 488) [Sat Mar 31 03:06:22 2012] XMMSAS bgd. selection expression = annulus(27920.172000, 35925.192000, 2155.200062, 4310.400124, X, Y) && !ellipse(24752.949066, 35182.918365, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(27894.900116, 34447.310638, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27143.029200, 34780.574000, 1063.080031, 1063.080031, 0.000000, X, Y) && !ellipse(28024.578200, 35096.256680, 856.416025, 503.164014, 1.396950, X, Y) && !ellipse(24209.748657, 35236.510132, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27235.646200, 35028.640200, 531.540015, 531.540015, 0.000000, X, Y) && !ellipse(27942.074677, 36385.760803, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25893.223083, 34395.192413, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25002.657227, 34448.051392, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30113.004517, 34244.798279, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29598.252747, 34314.936188, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27183.632800, 35845.671800, 809.576023, 809.576023, 0.000000, X, Y) && !ellipse(30711.884000, 34238.080000, 1765.632051, 428.373612, 0.000000, X, Y) && !ellipse(28108.826000, 36990.346000, 677.118419, 677.118419, 0.000000, X, Y) && !ellipse(28093.321075, 38754.729279, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27247.576800, 36553.846000, 814.320023, 814.320023, 0.000000, X, Y) && !ellipse(28154.057526, 39535.844208, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31565.594940, 34158.570892, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28210.922800, 37827.455400, 986.048028, 986.048028, 0.000000, X, Y) && !ellipse(28180.493652, 40566.776154, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32758.546600, 34135.681800, 1740.336050, 389.460011, 359.965000, X, Y) && !ellipse(28031.477478, 37711.247009, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26417.299316, 35091.747314, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25728.799774, 35182.289124, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31095.224640, 34720.178619, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25023.541687, 35182.233368, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28993.360077, 35698.163971, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27719.528800, 41969.554000, 2146.520062, 2146.520062, 0.000000, X, Y) && !ellipse(27436.210200, 40190.696858, 697.080820, 697.080820, 0.000000, X, Y) && !ellipse(29804.087400, 35047.984600, 741.655221, 741.655221, 0.000000, X, Y) && !ellipse(23984.652618, 34525.665863, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27631.545105, 39187.918549, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23589.159454, 35272.358337, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27281.821400, 37428.802000, 659.837619, 659.837619, 0.000000, X, Y) && !ellipse(32205.595062, 34209.292572, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27523.719055, 38060.951538, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29378.793335, 35695.386810, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27697.153534, 40927.167175, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27520.525055, 38575.581177, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22827.163391, 35151.464233, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32785.195923, 34753.177979, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32027.790405, 34560.016632, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30030.061401, 35448.604492, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26076.951111, 35709.766449, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32017.634918, 34972.273651, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30587.758270, 35960.682648, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29227.002655, 36338.172058, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33153.676000, 33692.094000, 2128.200061, 2128.200061, 0.000000, X, Y) && !ellipse(32178.404907, 35349.271881, 870.000000, 870.000000, 0.000000, X, Y) [Sat Mar 31 03:06:22 2012] Writing fullrun_mos2_xmm0412591401_pi300-10000_pass1_cl_src14.gif [Sat Mar 31 03:27:13 2012] Mean detx,y = (-266.02, 8432.89) [Sat Mar 31 03:27:16 2012] Setting backscal keywords in source and bgd. spectrum [Sat Mar 31 03:27:53 2012] Binned source spectrum to 10 counts/bin [Sat Mar 31 03:27:54 2012] Setting source spectrum file to fullrun_mos2_xmm0412591401_pi300-10000_pass1_cl_src14_src_b10.pi.gz [Sat Mar 31 03:27:54 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0412591401_pi300-10000_pass1_cl_src14_bgd.pi.gz [Sat Mar 31 11:26:47 2012] Updating aperture counts using extracted products [Sat Mar 31 11:26:47 2012] Error reading totcts from fullrun_mos2_xmm0412591401_pi300-10000_pass1_cl_src14_src_b10.pi.gz [Sat Mar 31 11:26:57 2012] Calculating source flux in energy range 0.30-8.00 [Sat Mar 31 11:26:57 2012] Using photon index=1.80, rate=0.0272, arf fullrun_mos2_xmm0412591401_pi300-10000_pass1_cl_src14.arf [Sat Mar 31 11:26:57 2012] Assuming count rate is from the 0.30-10.00 bandpass [Sat Mar 31 11:26:57 2012] Updating source flux to 6.2e-13 [Sat Mar 31 11:37:36 2012] Flag c found in src. 14 procflags, skipping spectral fitting