[Wed Mar 28 00:31:51 2012] Detection parameters:
  Position = (313.8, 224.1) = 5 34 31.82 21 54 15.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 967.1 +/- 45.2
  Background counts = 684.9
  Rate = 0.06 +/- 0.003

[Wed Mar 28 00:31:53 2012] Off-axis axis estimate = 5.50'
[Wed Mar 28 10:34:53 2012] Using EEF radius (= 9.18 ")to estimate initial spatial extent for simple fitting
[Wed Mar 28 10:34:53 2012] Initial guess for spatial extent in simple fitting = 9.18"
[Wed Mar 28 10:34:53 2012] source mask rpix=2.1, npix_max = 27, mask sum = 26, frac = 0.954
[Wed Mar 28 10:34:53 2012] Giving source the simple spatial ID 21 for pass 0, mean size = 9.18"
[Thu Mar 29 00:24:06 2012] fullrun_mos2_xmm0412591401_pi300-10000_cl_pass0_src21.ximg exists
[Thu Mar 29 00:24:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591401_pi300-10000_cl_pass0_src21.csv
[Thu Mar 29 00:24:06 2012] fullrun_mos2_xmm0412591401_pi300-10000_cl_pass0_src21_1.ximg exists
[Thu Mar 29 00:24:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591401_pi300-10000_cl_pass0_src21.csv
[Thu Mar 29 00:24:06 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412591401_pi300-10000_cl_pass0_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412591401_pi300-10000_cl_pass0_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 29 00:24:09 2012] fullrun_mos2_xmm0412591401_pi300-10000_cl_pass0_tfrozen_src21.ximg exists
[Thu Mar 29 00:24:09 2012] fullrun_mos2_xmm0412591401_pi300-10000_cl_pass0_tfrozen_src21_1.ximg exists
[Thu Mar 29 00:24:09 2012] Fit fullrun_mos2_xmm0412591401_pi300-10000_cl_pass0_tfrozen_src21 appears to have run properly
[Thu Mar 29 00:25:25 2012] Spatial fit model total counts = 10196.000000, observed total counts = 9397.000000
[Thu Mar 29 00:25:25 2012] Offset between fit and detection position for source 133 = 1.373263 pixels
[Thu Mar 29 00:25:25 2012] 10075.865000 total counts/ 9614.760000 bgd. counts: snr = 4.702520
Spatial fit parameters:
  Offset between fit and detection position for source 133 = 1.373263 pixels
  Position = (312.7, 223.3) = 5 34 32.16 21 54 5.8
  Extent = 7.5 (6.4-8.9)", rotation angle = 0
  Source counts = 461.1 +/- 100.4
  Background counts = 9614.8
  Rate = 0.02 +/- 0.005
[Thu Mar 29 00:25:26 2012] Vigneting correction estimate = 1.000000
[Thu Mar 29 00:25:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar 29 00:25:26 2012] Assessing source extent using major axis lower bound
[Thu Mar 29 00:25:26 2012] Source does appear to be extended
[Thu Mar 29 00:25:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar 29 00:25:26 2012] Source is confused with source 15
[Thu Mar 29 00:25:26 2012] Source is confused with source 128
[Thu Mar 29 00:25:26 2012] Source is confused with source 143
[Thu Mar 29 00:25:26 2012] Source is confused with source 132
[Thu Mar 29 11:04:59 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Mar 29 11:04:59 2012] Initial guess for spatial extent in simple fitting = 7.49"
[Thu Mar 29 11:04:59 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.810
[Thu Mar 29 11:04:59 2012] Giving source the simple spatial ID 21 for pass 1, mean size = 7.49"
[Fri Mar 30 21:00:05 2012] fullrun_mos2_xmm0412591401_pi300-10000_cl_pass1_src21.ximg exists
[Fri Mar 30 21:00:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591401_pi300-10000_cl_pass1_src21.csv
[Fri Mar 30 21:00:05 2012] fullrun_mos2_xmm0412591401_pi300-10000_cl_pass1_src21_1.ximg exists
[Fri Mar 30 21:00:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591401_pi300-10000_cl_pass1_src21.csv
[Fri Mar 30 21:00:05 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412591401_pi300-10000_cl_pass1_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412591401_pi300-10000_cl_pass1_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 30 21:00:08 2012] fullrun_mos2_xmm0412591401_pi300-10000_cl_pass1_tfrozen_src21.ximg exists
[Fri Mar 30 21:00:08 2012] fullrun_mos2_xmm0412591401_pi300-10000_cl_pass1_tfrozen_src21_1.ximg exists
[Fri Mar 30 21:00:08 2012] Fit fullrun_mos2_xmm0412591401_pi300-10000_cl_pass1_tfrozen_src21 appears to have run properly
[Fri Mar 30 21:01:43 2012] Spatial fit model total counts = 9903.370000, observed total counts = 9156.000000
[Fri Mar 30 21:01:43 2012] Offset between fit and detection position for source 133 = 0.814298 pixels
[Fri Mar 30 21:01:43 2012] 9270.079000 total counts/ 8939.910000 bgd. counts: snr = 3.491964
Spatial fit parameters:
  Offset between fit and detection position for source 133 = 0.814298 pixels
  Position = (311.9, 223.2) = 5 34 32.42 21 54 5.6
  Extent = 6.9 (5.4-8.4)", rotation angle = 0
  Source counts = 330.2 +/- 96.3
  Background counts = 8939.9
  Rate = 0.02 +/- 0.004
[Fri Mar 30 21:01:43 2012] Spatial fit model total counts = 10394.200000, observed total counts = 9296.000000
[Fri Mar 30 21:01:43 2012] Poor agreement between spatial fit and data for source 133
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Mar 30 21:01:44 2012] Vigneting correction estimate = 1.000000
[Fri Mar 30 21:01:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 30 21:01:44 2012] Assessing source extent using major axis lower bound
[Fri Mar 30 21:01:44 2012] Source does appear to be extended
[Fri Mar 30 21:01:44 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Mar 31 03:06:23 2012] XMMSAS src. selection expression = ellipse(27082.561400, 19369.402600, 411.164412, 411.164412, 0.000000, X, Y)
[Sat Mar 31 03:06:23 2012] Writing source region out to fullrun_mos2_xmm0412591401_pi300-10000_pass1_cl_src133_src.reg
[Sat Mar 31 03:06:23 2012] Extracting stamp from image fullrun_mos2_xmm0412591401_pi300-10000_cl_sm2.00.img.gz, (288, 200) - (335, 247)
[Sat Mar 31 03:06:23 2012] XMMSAS bgd. selection expression = annulus(27082.561400, 19369.402600, 685.274020, 1370.548039, X, Y) && !ellipse(26071.946000, 18569.752000, 1494.272043, 1494.272043, 0.000000, X, Y) && !ellipse(26786.651062, 19385.187393, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28744.950226, 20228.678253, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27607.537000, 20264.568000, 961.440028, 961.440028, 0.000000, X, Y) && !ellipse(27363.943000, 19419.678000, 869.344025, 869.344025, 0.000000, X, Y) && !ellipse(27201.366638, 20269.881653, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27218.650879, 18563.319092, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29196.100474, 19993.140592, 1433.944041, 516.825306, 0.000000, X, Y) && !ellipse(25421.241180, 20399.840027, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29392.056000, 19123.728000, 1516.920044, 1516.920044, 0.000000, X, Y) && !ellipse(26698.344788, 18596.005157, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28388.020200, 19155.411400, 1503.272043, 1503.272043, 0.000000, X, Y) && !ellipse(27673.714000, 19265.695000, 1498.696043, 1498.696043, 0.000000, X, Y) && !ellipse(28191.388000, 19188.462000, 1539.240044, 352.554410, 2.009000, X, Y) && !ellipse(25198.237305, 19531.304276, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28959.262000, 18287.870000, 1541.168044, 581.323217, 0.047000, X, Y) && !ellipse(27457.797000, 17853.804000, 2992.592086, 2992.592086, 0.000000, X, Y) && !ellipse(29858.290000, 19230.603200, 1565.384045, 510.788815, 15.133000, X, Y) && !ellipse(26612.852844, 18988.172897, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28976.805969, 18862.194412, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26315.399292, 17871.563156, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26996.863007, 17176.581360, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27947.267914, 18054.145538, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28700.954000, 18024.964000, 1569.944045, 1569.944045, 0.000000, X, Y)
[Sat Mar 31 03:06:23 2012] Writing fullrun_mos2_xmm0412591401_pi300-10000_pass1_cl_src133.gif
[Sat Mar 31 03:41:31 2012] Mean detx,y = (-398.68, -8092.55) 
[Sat Mar 31 03:41:33 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Mar 31 03:41:45 2012] Binned source spectrum to 10 counts/bin
[Sat Mar 31 03:41:46 2012] Setting source spectrum file to fullrun_mos2_xmm0412591401_pi300-10000_pass1_cl_src133_src_b10.pi.gz
[Sat Mar 31 03:41:46 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0412591401_pi300-10000_pass1_cl_src133_bgd.pi.gz
[Sat Mar 31 11:26:48 2012] Updating aperture counts using extracted products
[Sat Mar 31 11:26:48 2012] Error reading totcts from fullrun_mos2_xmm0412591401_pi300-10000_pass1_cl_src133_src_b10.pi.gz
[Sat Mar 31 11:26:58 2012] Calculating source flux in energy range 0.30-8.00
[Sat Mar 31 11:26:58 2012] Using photon index=1.80, rate=0.0151, arf fullrun_mos2_xmm0412591401_pi300-10000_pass1_cl_src133.arf
[Sat Mar 31 11:26:58 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Mar 31 11:26:58 2012] Updating source flux to 3.9e-13
[Sat Mar 31 11:37:36 2012] Flag p found in src. 133 procflags, skipping spectral fitting
[Sat Mar 31 11:37:36 2012] Flag c found in src. 133 procflags, skipping spectral fitting