[Wed Mar 28 00:31:43 2012] Detection parameters:
  Position = (321.9, 429.0) = 5 34 29.28 22 8 58.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1400.8 +/- 59.9
  Background counts = 382.4
  Rate = 0.06 +/- 0.003

[Wed Mar 28 00:31:53 2012] Off-axis axis estimate = 9.62'
[Wed Mar 28 10:34:53 2012] Using EEF radius (= 11.24 ")to estimate initial spatial extent for simple fitting
[Wed Mar 28 10:34:53 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Mar 28 10:34:53 2012] Initial guess for spatial extent in simple fitting = 11.24"
[Wed Mar 28 10:34:53 2012] source mask rpix=2.6, npix_max = 38, mask sum = 31, frac = 0.815
[Wed Mar 28 10:34:53 2012] Giving source the simple spatial ID 22 for pass 0, mean size = 11.24"
[Thu Mar 29 00:24:06 2012] fullrun_mos2_xmm0412591401_pi300-10000_cl_pass0_src22.ximg exists
[Thu Mar 29 00:24:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591401_pi300-10000_cl_pass0_src22.csv
[Thu Mar 29 00:24:06 2012] fullrun_mos2_xmm0412591401_pi300-10000_cl_pass0_src22_1.ximg exists
[Thu Mar 29 00:24:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591401_pi300-10000_cl_pass0_src22.csv
[Thu Mar 29 00:24:06 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412591401_pi300-10000_cl_pass0_src22_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412591401_pi300-10000_cl_pass0_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 29 00:24:09 2012] fullrun_mos2_xmm0412591401_pi300-10000_cl_pass0_tfrozen_src22.ximg exists
[Thu Mar 29 00:24:09 2012] fullrun_mos2_xmm0412591401_pi300-10000_cl_pass0_tfrozen_src22_1.ximg exists
[Thu Mar 29 00:24:09 2012] Fit fullrun_mos2_xmm0412591401_pi300-10000_cl_pass0_tfrozen_src22 appears to have run properly
[Thu Mar 29 00:25:25 2012] Warning, spatial fit 22 centroid is now closest to src. 29
[Thu Mar 29 00:25:26 2012] Vigneting correction estimate = 1.000000
[Thu Mar 29 00:25:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar 29 00:25:26 2012] Assessing source extent using major
[Thu Mar 29 00:25:26 2012] Source does appear to be extended
[Thu Mar 29 00:25:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar 29 00:25:26 2012] Source is confused with source 12
[Thu Mar 29 00:25:26 2012] Source is confused with source 25
[Thu Mar 29 11:04:59 2012] Using EEF radius (= 11.24 ")to estimate initial spatial extent for simple fitting
[Thu Mar 29 11:04:59 2012] Initial guess for spatial extent in simple fitting = 11.24"
[Thu Mar 29 11:04:59 2012] source mask rpix=2.6, npix_max = 38, mask sum = 31, frac = 0.815
[Thu Mar 29 11:04:59 2012] Giving source the simple spatial ID 22 for pass 1, mean size = 11.24"
[Fri Mar 30 21:00:05 2012] fullrun_mos2_xmm0412591401_pi300-10000_cl_pass1_src22.ximg exists
[Fri Mar 30 21:00:05 2012] fullrun_mos2_xmm0412591401_pi300-10000_cl_pass1_src22_1.ximg exists
[Fri Mar 30 21:00:05 2012] Fit fullrun_mos2_xmm0412591401_pi300-10000_cl_pass1_src22 appears to have run properly
[Fri Mar 30 21:00:08 2012] fullrun_mos2_xmm0412591401_pi300-10000_cl_pass1_tfrozen_src22.ximg exists
[Fri Mar 30 21:00:08 2012] fullrun_mos2_xmm0412591401_pi300-10000_cl_pass1_tfrozen_src22_1.ximg exists
[Fri Mar 30 21:00:08 2012] Fit fullrun_mos2_xmm0412591401_pi300-10000_cl_pass1_tfrozen_src22 appears to have run properly
[Fri Mar 30 21:01:42 2012] Spatial fit model total counts = 15529.600000, observed total counts = 15609.000000
[Fri Mar 30 21:01:42 2012] Offset between fit and detection position for source 13 = 3.753179 pixels
[Fri Mar 30 21:01:42 2012] Warning, changing simple spatial fit ID from 22 to 9
[Fri Mar 30 21:01:42 2012] 14772.812000 total counts/ 14227.400000 bgd. counts: snr = 4.572586
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 3.753179 pixels
  Position = (323.6, 425.7) = 5 34 28.72 22 8 46.6
  Extent = 8.5 (7.2-10.4)", rotation angle = 0
  Source counts = 545.4 +/- 121.5
  Background counts = 14227.4
  Rate = 0.02 +/- 0.006
[Fri Mar 30 21:01:44 2012] Vigneting correction estimate = 1.000000
[Fri Mar 30 21:01:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 30 21:01:44 2012] Assessing source extent using major axis lower bound
[Fri Mar 30 21:01:44 2012] Source does appear to be extended
[Fri Mar 30 21:01:44 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Mar 31 03:06:23 2012] XMMSAS src. selection expression = ellipse(28108.826000, 36990.346000, 507.838815, 507.838815, 0.000000, X, Y)
[Sat Mar 31 03:06:23 2012] Writing source region out to fullrun_mos2_xmm0412591401_pi300-10000_pass1_cl_src13_src.reg
[Sat Mar 31 03:06:23 2012] Extracting stamp from image fullrun_mos2_xmm0412591401_pi300-10000_cl_sm2.00.img.gz, (294, 397) - (353, 455)
[Sat Mar 31 03:06:23 2012] XMMSAS bgd. selection expression = annulus(28108.826000, 36990.346000, 846.398024, 1692.796049, X, Y) && !ellipse(24752.949066, 35182.918365, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(27894.900116, 34447.310638, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27143.029200, 34780.574000, 1063.080031, 1063.080031, 0.000000, X, Y) && !ellipse(27920.172000, 35925.192000, 1724.160050, 442.086413, 90.025000, X, Y) && !ellipse(28024.578200, 35096.256680, 856.416025, 503.164014, 1.396950, X, Y) && !ellipse(27235.646200, 35028.640200, 531.540015, 531.540015, 0.000000, X, Y) && !ellipse(27942.074677, 36385.760803, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27183.632800, 35845.671800, 809.576023, 809.576023, 0.000000, X, Y) && !ellipse(30711.884000, 34238.080000, 1765.632051, 428.373612, 0.000000, X, Y) && !ellipse(28093.321075, 38754.729279, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27247.576800, 36553.846000, 814.320023, 814.320023, 0.000000, X, Y) && !ellipse(28154.057526, 39535.844208, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28210.922800, 37827.455400, 986.048028, 986.048028, 0.000000, X, Y) && !ellipse(28031.477478, 37711.247009, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26417.299316, 35091.747314, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25728.799774, 35182.289124, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28993.360077, 35698.163971, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29804.087400, 35047.984600, 741.655221, 741.655221, 0.000000, X, Y) && !ellipse(27631.545105, 39187.918549, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27281.821400, 37428.802000, 659.837619, 659.837619, 0.000000, X, Y) && !ellipse(27523.719055, 38060.951538, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29378.793335, 35695.386810, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27520.525055, 38575.581177, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30030.061401, 35448.604492, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26076.951111, 35709.766449, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30587.758270, 35960.682648, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29227.002655, 36338.172058, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Mar 31 03:06:23 2012] Writing fullrun_mos2_xmm0412591401_pi300-10000_pass1_cl_src13.gif
[Sat Mar 31 03:42:08 2012] Mean detx,y = (-383.51, 9566.86) 
[Sat Mar 31 03:42:10 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Mar 31 03:42:29 2012] Binned source spectrum to 10 counts/bin
[Sat Mar 31 03:42:29 2012] Setting source spectrum file to fullrun_mos2_xmm0412591401_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Sat Mar 31 03:42:29 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0412591401_pi300-10000_pass1_cl_src13_bgd.pi.gz
[Sat Mar 31 11:26:48 2012] Updating aperture counts using extracted products
[Sat Mar 31 11:26:48 2012] Error reading totcts from fullrun_mos2_xmm0412591401_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Sat Mar 31 11:26:58 2012] Calculating source flux in energy range 0.30-8.00
[Sat Mar 31 11:26:58 2012] Using photon index=1.80, rate=0.025, arf fullrun_mos2_xmm0412591401_pi300-10000_pass1_cl_src13.arf
[Sat Mar 31 11:26:58 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Mar 31 11:26:58 2012] Updating source flux to 6e-13
[Sat Mar 31 11:37:36 2012] Flag c found in src. 13 procflags, skipping spectral fitting