[Wed Mar 28 00:31:50 2012] Detection parameters:
  Position = (305.5, 233.9) = 5 34 34.39 21 54 54.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1099.2 +/- 57.3
  Background counts = 742.5
  Rate = 0.07 +/- 0.004

[Wed Mar 28 00:31:53 2012] Off-axis axis estimate = 4.71'
[Wed Mar 28 10:34:53 2012] Using EEF radius (= 8.78 ")to estimate initial spatial extent for simple fitting
[Wed Mar 28 10:34:53 2012] Initial guess for spatial extent in simple fitting = 8.78"
[Wed Mar 28 10:34:53 2012] source mask rpix=2.0, npix_max = 25, mask sum = 20, frac = 0.788
[Wed Mar 28 10:34:53 2012] Giving source the simple spatial ID 14 for pass 0, mean size = 8.78"
[Thu Mar 29 00:24:06 2012] fullrun_mos2_xmm0412591401_pi300-10000_cl_pass0_src14.ximg exists
[Thu Mar 29 00:24:06 2012] fullrun_mos2_xmm0412591401_pi300-10000_cl_pass0_src14_1.ximg exists
[Thu Mar 29 00:24:06 2012] Fit fullrun_mos2_xmm0412591401_pi300-10000_cl_pass0_src14 appears to have run properly
[Thu Mar 29 00:24:09 2012] fullrun_mos2_xmm0412591401_pi300-10000_cl_pass0_tfrozen_src14.ximg exists
[Thu Mar 29 00:24:09 2012] fullrun_mos2_xmm0412591401_pi300-10000_cl_pass0_tfrozen_src14_1.ximg exists
[Thu Mar 29 00:24:09 2012] Fit fullrun_mos2_xmm0412591401_pi300-10000_cl_pass0_tfrozen_src14 appears to have run properly
[Thu Mar 29 00:25:25 2012] Spatial fit model total counts = 8730.160000, observed total counts = 8841.000000
[Thu Mar 29 00:25:25 2012] Offset between fit and detection position for source 129 = 7.257185 pixels
[Thu Mar 29 00:25:25 2012] 12001.260000 total counts/ 8834.410000 bgd. counts: snr = 33.692925
Spatial fit parameters:
  Offset between fit and detection position for source 129 = 7.257185 pixels
  Position = (298.9, 231.0) = 5 34 36.47 21 54 39.5
  Extent = 17.6" x 17.6", rotation angle = 0
  Source counts = 3166.8 +/- 109.6
  Background counts = 8834.4
  Rate = 0.1 +/- 0.005
[Thu Mar 29 00:25:26 2012] Vigneting correction estimate = 1.000000
[Thu Mar 29 00:25:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar 29 00:25:26 2012] Assessing source extent using major
[Thu Mar 29 00:25:26 2012] Source does appear to be extended
[Thu Mar 29 00:25:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar 29 00:25:26 2012] Source is confused with source 120
[Thu Mar 29 00:25:26 2012] Source is confused with source 130
[Thu Mar 29 11:04:59 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Mar 29 11:04:59 2012] Initial guess for spatial extent in simple fitting = 17.56"
[Thu Mar 29 11:04:59 2012] source mask rpix=4.0, npix_max = 82, mask sum = 90, frac = 1.093
[Thu Mar 29 11:04:59 2012] Giving source the simple spatial ID 14 for pass 1, mean size = 17.56"
[Fri Mar 30 21:00:05 2012] fullrun_mos2_xmm0412591401_pi300-10000_cl_pass1_src14.ximg exists
[Fri Mar 30 21:00:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591401_pi300-10000_cl_pass1_src14.csv
[Fri Mar 30 21:00:05 2012] fullrun_mos2_xmm0412591401_pi300-10000_cl_pass1_src14_1.ximg exists
[Fri Mar 30 21:00:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591401_pi300-10000_cl_pass1_src14.csv
[Fri Mar 30 21:00:05 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412591401_pi300-10000_cl_pass1_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412591401_pi300-10000_cl_pass1_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 30 21:00:08 2012] fullrun_mos2_xmm0412591401_pi300-10000_cl_pass1_tfrozen_src14.ximg exists
[Fri Mar 30 21:00:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591401_pi300-10000_cl_pass1_tfrozen_src14.csv
[Fri Mar 30 21:00:08 2012] fullrun_mos2_xmm0412591401_pi300-10000_cl_pass1_tfrozen_src14_1.ximg exists
[Fri Mar 30 21:00:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591401_pi300-10000_cl_pass1_tfrozen_src14.csv
[Fri Mar 30 21:00:08 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412591401_pi300-10000_cl_pass1_tfrozen_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412591401_pi300-10000_cl_pass1_tfrozen_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 30 21:01:42 2012] Spatial fit model total counts = 20494.900000, observed total counts = 18964.000000
[Fri Mar 30 21:01:42 2012] Offset between fit and detection position for source 129 = 1.889922 pixels
[Fri Mar 30 21:01:42 2012] Warning, changing simple spatial fit ID from 14 to 11
[Fri Mar 30 21:01:42 2012] 20839.506000 total counts/ 20605.600000 bgd. counts: snr = 1.629479
Spatial fit parameters:
  Offset between fit and detection position for source 129 = 1.889922 pixels
  Position = (300.4, 232.1) = 5 34 35.99 21 54 44.3
  Extent = 16.2 (10.3-21.4)", rotation angle = 0
  Source counts = 233.9 +/- 144.4
  Background counts = 20605.6
  Rate = 0.01 +/- 0.007
  Deleting source due to low Poisson probability