[Wed Mar 28 00:31:50 2012] Detection parameters:
  Position = (319.9, 233.5) = 5 34 29.90 21 54 50.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 818.7 +/- 51.5
  Background counts = 750.7
  Rate = 0.05 +/- 0.003

[Wed Mar 28 00:31:53 2012] Off-axis axis estimate = 4.96'
[Wed Mar 28 10:34:54 2012] Using EEF radius (= 8.91 ")to estimate initial spatial extent for simple fitting
[Wed Mar 28 10:34:54 2012] Initial guess for spatial extent in simple fitting = 8.91"
[Wed Mar 28 10:34:54 2012] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.963
[Wed Mar 28 10:34:54 2012] Giving source the simple spatial ID 45 for pass 0, mean size = 8.91"
[Thu Mar 29 00:24:07 2012] fullrun_mos2_xmm0412591401_pi300-10000_cl_pass0_src45.ximg exists
[Thu Mar 29 00:24:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591401_pi300-10000_cl_pass0_src45.csv
[Thu Mar 29 00:24:07 2012] fullrun_mos2_xmm0412591401_pi300-10000_cl_pass0_src45_1.ximg exists
[Thu Mar 29 00:24:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591401_pi300-10000_cl_pass0_src45.csv
[Thu Mar 29 00:24:07 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412591401_pi300-10000_cl_pass0_src45_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412591401_pi300-10000_cl_pass0_src45.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 29 00:24:10 2012] fullrun_mos2_xmm0412591401_pi300-10000_cl_pass0_tfrozen_src45.ximg exists
[Thu Mar 29 00:24:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591401_pi300-10000_cl_pass0_tfrozen_src45.csv
[Thu Mar 29 00:24:10 2012] fullrun_mos2_xmm0412591401_pi300-10000_cl_pass0_tfrozen_src45_1.ximg exists
[Thu Mar 29 00:24:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591401_pi300-10000_cl_pass0_tfrozen_src45.csv
[Thu Mar 29 00:24:10 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412591401_pi300-10000_cl_pass0_tfrozen_src45_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412591401_pi300-10000_cl_pass0_tfrozen_src45.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 29 00:25:26 2012] Warning, spatial fit 45 centroid is now closest to src. 131
[Thu Mar 29 00:25:26 2012] Spatial fit model total counts = 10081.600000, observed total counts = 10228.000000
[Thu Mar 29 00:25:26 2012] Offset between fit and detection position for source 123 = 2.016625 pixels
[Thu Mar 29 00:25:26 2012] Warning, changing simple spatial fit ID from 45 to 48
[Thu Mar 29 00:25:26 2012] 10010.227000 total counts/ 9744.580000 bgd. counts: snr = 2.691060
Spatial fit parameters:
  Offset between fit and detection position for source 123 = 2.016625 pixels
  Position = (317.9, 233.5) = 5 34 30.53 21 54 50.3
  Extent = 12.0 (7.1-15.0)", rotation angle = 0
  Source counts = 265.6 +/- 100.1
  Background counts = 9744.6
  Rate = 0.01 +/- 0.005
[Thu Mar 29 00:25:26 2012] Spatial fit model total counts = 107866.000000, observed total counts = 8930.000000
[Thu Mar 29 00:25:26 2012] Poor agreement between spatial fit and data for source 123
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Mar 29 00:25:26 2012] Vigneting correction estimate = 1.000000
[Thu Mar 29 00:25:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar 29 00:25:26 2012] Assessing source extent using major axis lower bound
[Thu Mar 29 00:25:26 2012] Source does appear to be extended
[Thu Mar 29 00:25:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar 29 00:25:26 2012] Source is confused with source 124
[Thu Mar 29 00:25:26 2012] Source is confused with source 143
[Thu Mar 29 11:04:59 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Mar 29 11:04:59 2012] Initial guess for spatial extent in simple fitting = 12.02"
[Thu Mar 29 11:04:59 2012] source mask rpix=2.8, npix_max = 42, mask sum = 42, frac = 0.986
[Thu Mar 29 11:04:59 2012] Giving source the simple spatial ID 45 for pass 1, mean size = 12.02"
[Fri Mar 30 21:00:06 2012] fullrun_mos2_xmm0412591401_pi300-10000_cl_pass1_src45.ximg exists
[Fri Mar 30 21:00:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591401_pi300-10000_cl_pass1_src45.csv
[Fri Mar 30 21:00:06 2012] fullrun_mos2_xmm0412591401_pi300-10000_cl_pass1_src45_1.ximg exists
[Fri Mar 30 21:00:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591401_pi300-10000_cl_pass1_src45.csv
[Fri Mar 30 21:00:06 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412591401_pi300-10000_cl_pass1_src45_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412591401_pi300-10000_cl_pass1_src45.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 30 21:00:09 2012] fullrun_mos2_xmm0412591401_pi300-10000_cl_pass1_tfrozen_src45.ximg exists
[Fri Mar 30 21:00:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591401_pi300-10000_cl_pass1_tfrozen_src45.csv
[Fri Mar 30 21:00:09 2012] fullrun_mos2_xmm0412591401_pi300-10000_cl_pass1_tfrozen_src45_1.ximg exists
[Fri Mar 30 21:00:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591401_pi300-10000_cl_pass1_tfrozen_src45.csv
[Fri Mar 30 21:00:09 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412591401_pi300-10000_cl_pass1_tfrozen_src45_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412591401_pi300-10000_cl_pass1_tfrozen_src45.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 30 21:01:43 2012] Warning, spatial fit 45 centroid is now closest to src. 131
[Fri Mar 30 21:01:44 2012] Vigneting correction estimate = 1.000000
[Fri Mar 30 21:01:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 30 21:01:44 2012] Assessing source extent using major axis lower bound
[Fri Mar 30 21:01:44 2012] Source does appear to be extended
[Fri Mar 30 21:01:44 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Mar 31 03:06:25 2012] XMMSAS src. selection expression = ellipse(27607.537000, 20264.568000, 721.080021, 721.080021, 0.000000, X, Y)
[Sat Mar 31 03:06:25 2012] Writing source region out to fullrun_mos2_xmm0412591401_pi300-10000_pass1_cl_src123_src.reg
[Sat Mar 31 03:06:25 2012] Extracting stamp from image fullrun_mos2_xmm0412591401_pi300-10000_cl_sm2.00.img.gz, (276, 192) - (359, 275)
[Sat Mar 31 03:06:25 2012] XMMSAS bgd. selection expression = annulus(27607.537000, 20264.568000, 1201.800035, 2403.600069, X, Y) && !ellipse(30184.695618, 19088.171921, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26071.946000, 18569.752000, 1494.272043, 1494.272043, 0.000000, X, Y) && !ellipse(27082.561400, 19369.402600, 548.219216, 548.219216, 0.000000, X, Y) && !ellipse(26786.651062, 19385.187393, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28744.950226, 20228.678253, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27363.943000, 19419.678000, 869.344025, 869.344025, 0.000000, X, Y) && !ellipse(27201.366638, 20269.881653, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27218.650879, 18563.319092, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29196.100474, 19993.140592, 1433.944041, 516.825306, 0.000000, X, Y) && !ellipse(25421.241180, 20399.840027, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29392.056000, 19123.728000, 1516.920044, 1516.920044, 0.000000, X, Y) && !ellipse(26698.344788, 18596.005157, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28388.020200, 19155.411400, 1503.272043, 1503.272043, 0.000000, X, Y) && !ellipse(27673.714000, 19265.695000, 1498.696043, 1498.696043, 0.000000, X, Y) && !ellipse(28191.388000, 19188.462000, 1539.240044, 352.554410, 2.009000, X, Y) && !ellipse(25198.237305, 19531.304276, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28959.262000, 18287.870000, 1541.168044, 581.323217, 0.047000, X, Y) && !ellipse(27457.797000, 17853.804000, 2992.592086, 2992.592086, 0.000000, X, Y) && !ellipse(29858.290000, 19230.603200, 1565.384045, 510.788815, 15.133000, X, Y) && !ellipse(26612.852844, 18988.172897, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28976.805969, 18862.194412, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24392.292542, 20323.511917, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26315.399292, 17871.563156, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30670.712006, 20141.715424, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30845.168671, 19173.324020, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26996.863007, 17176.581360, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27947.267914, 18054.145538, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28700.954000, 18024.964000, 1569.944045, 1569.944045, 0.000000, X, Y)
[Sat Mar 31 03:06:25 2012] Writing fullrun_mos2_xmm0412591401_pi300-10000_pass1_cl_src123.gif
[Sat Mar 31 04:11:02 2012] Mean detx,y = (-793.46, -7268.86) 
[Sat Mar 31 04:11:05 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Mar 31 04:11:28 2012] Binned source spectrum to 10 counts/bin
[Sat Mar 31 04:11:29 2012] Setting source spectrum file to fullrun_mos2_xmm0412591401_pi300-10000_pass1_cl_src123_src_b10.pi.gz
[Sat Mar 31 04:11:29 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0412591401_pi300-10000_pass1_cl_src123_bgd.pi.gz
[Sat Mar 31 11:26:49 2012] Updating aperture counts using extracted products
[Sat Mar 31 11:26:49 2012] Error reading totcts from fullrun_mos2_xmm0412591401_pi300-10000_pass1_cl_src123_src_b10.pi.gz
[Sat Mar 31 11:26:59 2012] Calculating source flux in energy range 0.30-8.00
[Sat Mar 31 11:26:59 2012] Using photon index=1.80, rate=0.0122, arf fullrun_mos2_xmm0412591401_pi300-10000_pass1_cl_src123.arf
[Sat Mar 31 11:26:59 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Mar 31 11:26:59 2012] Updating source flux to 2e-13
[Sat Mar 31 11:37:36 2012] Flag p found in src. 123 procflags, skipping spectral fitting
[Sat Mar 31 11:37:36 2012] Flag c found in src. 123 procflags, skipping spectral fitting