[Wed Mar 28 00:31:50 2012] Detection parameters:
  Position = (292.8, 235.0) = 5 34 38.38 21 55 7.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 558.1 +/- 36.5
  Background counts = 747.0
  Rate = 0.04 +/- 0.003

[Wed Mar 28 00:31:53 2012] Off-axis axis estimate = 4.61'
[Wed Mar 28 10:34:54 2012] Using EEF radius (= 8.74 ")to estimate initial spatial extent for simple fitting
[Wed Mar 28 10:34:54 2012] Initial guess for spatial extent in simple fitting = 8.74"
[Wed Mar 28 10:34:54 2012] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.993
[Wed Mar 28 10:34:54 2012] Giving source the simple spatial ID 56 for pass 0, mean size = 8.74"
[Thu Mar 29 00:24:07 2012] fullrun_mos2_xmm0412591401_pi300-10000_cl_pass0_src56.ximg exists
[Thu Mar 29 00:24:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591401_pi300-10000_cl_pass0_src56.csv
[Thu Mar 29 00:24:07 2012] fullrun_mos2_xmm0412591401_pi300-10000_cl_pass0_src56_1.ximg exists
[Thu Mar 29 00:24:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591401_pi300-10000_cl_pass0_src56.csv
[Thu Mar 29 00:24:07 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412591401_pi300-10000_cl_pass0_src56_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412591401_pi300-10000_cl_pass0_src56.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 29 00:24:10 2012] fullrun_mos2_xmm0412591401_pi300-10000_cl_pass0_tfrozen_src56.ximg exists
[Thu Mar 29 00:24:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591401_pi300-10000_cl_pass0_tfrozen_src56.csv
[Thu Mar 29 00:24:10 2012] fullrun_mos2_xmm0412591401_pi300-10000_cl_pass0_tfrozen_src56_1.ximg exists
[Thu Mar 29 00:24:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591401_pi300-10000_cl_pass0_tfrozen_src56.csv
[Thu Mar 29 00:24:10 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412591401_pi300-10000_cl_pass0_tfrozen_src56_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412591401_pi300-10000_cl_pass0_tfrozen_src56.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 29 00:25:26 2012] Warning, spatial fit 56 centroid is now closest to src. 130
[Thu Mar 29 00:25:26 2012] Vigneting correction estimate = 1.000000
[Thu Mar 29 00:25:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar 29 00:25:26 2012] Assessing source extent using major
[Thu Mar 29 00:25:26 2012] Source does appear to be extended
[Thu Mar 29 00:25:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar 29 00:25:26 2012] Source is confused with source 129
[Thu Mar 29 11:04:59 2012] Using EEF radius (= 8.74 ")to estimate initial spatial extent for simple fitting
[Thu Mar 29 11:04:59 2012] Initial guess for spatial extent in simple fitting = 8.74"
[Thu Mar 29 11:04:59 2012] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.993
[Thu Mar 29 11:04:59 2012] Giving source the simple spatial ID 56 for pass 1, mean size = 8.74"
[Fri Mar 30 21:00:06 2012] fullrun_mos2_xmm0412591401_pi300-10000_cl_pass1_src56.ximg exists
[Fri Mar 30 21:00:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591401_pi300-10000_cl_pass1_src56.csv
[Fri Mar 30 21:00:06 2012] fullrun_mos2_xmm0412591401_pi300-10000_cl_pass1_src56_1.ximg exists
[Fri Mar 30 21:00:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591401_pi300-10000_cl_pass1_src56.csv
[Fri Mar 30 21:00:06 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412591401_pi300-10000_cl_pass1_src56_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412591401_pi300-10000_cl_pass1_src56.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 30 21:00:09 2012] fullrun_mos2_xmm0412591401_pi300-10000_cl_pass1_tfrozen_src56.ximg exists
[Fri Mar 30 21:00:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591401_pi300-10000_cl_pass1_tfrozen_src56.csv
[Fri Mar 30 21:00:09 2012] fullrun_mos2_xmm0412591401_pi300-10000_cl_pass1_tfrozen_src56_1.ximg exists
[Fri Mar 30 21:00:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591401_pi300-10000_cl_pass1_tfrozen_src56.csv
[Fri Mar 30 21:00:09 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412591401_pi300-10000_cl_pass1_tfrozen_src56_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412591401_pi300-10000_cl_pass1_tfrozen_src56.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 30 21:01:43 2012] Warning, spatial fit 56 centroid is now closest to src. 130
[Fri Mar 30 21:01:44 2012] Vigneting correction estimate = 1.000000
[Fri Mar 30 21:01:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 30 21:01:44 2012] Assessing source extent using major
[Fri Mar 30 21:01:44 2012] Source does appear to be extended
[Fri Mar 30 21:01:44 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Mar 31 03:06:26 2012] XMMSAS src. selection expression = ellipse(25421.241180, 20399.840027, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Mar 31 03:06:26 2012] Writing source region out to fullrun_mos2_xmm0412591401_pi300-10000_pass1_cl_src120_src.reg
[Sat Mar 31 03:06:26 2012] Extracting stamp from image fullrun_mos2_xmm0412591401_pi300-10000_cl_sm2.00.img.gz, (255, 198) - (330, 273)
[Sat Mar 31 03:06:26 2012] XMMSAS bgd. selection expression = annulus(25421.241180, 20399.840027, 1087.500000, 2175.000000, X, Y) && !ellipse(26071.946000, 18569.752000, 1494.272043, 1494.272043, 0.000000, X, Y) && !ellipse(27082.561400, 19369.402600, 548.219216, 548.219216, 0.000000, X, Y) && !ellipse(26786.651062, 19385.187393, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27607.537000, 20264.568000, 961.440028, 961.440028, 0.000000, X, Y) && !ellipse(27363.943000, 19419.678000, 869.344025, 869.344025, 0.000000, X, Y) && !ellipse(27201.366638, 20269.881653, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27218.650879, 18563.319092, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26698.344788, 18596.005157, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28388.020200, 19155.411400, 1503.272043, 1503.272043, 0.000000, X, Y) && !ellipse(27673.714000, 19265.695000, 1498.696043, 1498.696043, 0.000000, X, Y) && !ellipse(28191.388000, 19188.462000, 1539.240044, 352.554410, 2.009000, X, Y) && !ellipse(25198.237305, 19531.304276, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28959.262000, 18287.870000, 1541.168044, 581.323217, 0.047000, X, Y) && !ellipse(27457.797000, 17853.804000, 2992.592086, 2992.592086, 0.000000, X, Y) && !ellipse(26612.852844, 18988.172897, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24392.292542, 20323.511917, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26315.399292, 17871.563156, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23866.246277, 20496.951706, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27947.267914, 18054.145538, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23159.602264, 20576.181763, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22789.870850, 20571.175705, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28700.954000, 18024.964000, 1569.944045, 1569.944045, 0.000000, X, Y)
[Sat Mar 31 03:06:26 2012] Writing fullrun_mos2_xmm0412591401_pi300-10000_pass1_cl_src120.gif
[Sat Mar 31 04:26:00 2012] Mean detx,y = (1374.47, -7266.16) 
[Sat Mar 31 04:26:03 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Mar 31 04:26:21 2012] Binned source spectrum to 10 counts/bin
[Sat Mar 31 04:26:22 2012] Setting source spectrum file to fullrun_mos2_xmm0412591401_pi300-10000_pass1_cl_src120_src_b10.pi.gz
[Sat Mar 31 04:26:22 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0412591401_pi300-10000_pass1_cl_src120_bgd.pi.gz
[Sat Mar 31 08:42:59 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Mar 31 08:43:00 2012] rmf not generated due to insufficient counts
[Sat Mar 31 11:26:50 2012] Updating aperture counts using extracted products
[Sat Mar 31 11:26:50 2012] Error reading totcts from fullrun_mos2_xmm0412591401_pi300-10000_pass1_cl_src120_src_b10.pi.gz
[Sat Mar 31 11:26:59 2012] Calculating source flux in energy range 0.30-8.00
[Sat Mar 31 11:26:59 2012] Using photon index=1.80, rate=0.0434, arf fullrun_mos2_xmm0412591401_pi300-10000_pass1_cl_src120.arf
[Sat Mar 31 11:26:59 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Mar 31 11:26:59 2012] Updating source flux to 7.1e-13
[Sat Mar 31 11:37:36 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting