[Wed Mar 28 00:31:50 2012] Detection parameters:
  Position = (387.9, 266.0) = 5 34 8.64 21 57 11.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 514.0 +/- 41.2
  Background counts = 728.1
  Rate = 0.04 +/- 0.003

[Wed Mar 28 00:31:53 2012] Off-axis axis estimate = 6.90'
[Wed Mar 28 10:34:54 2012] Using EEF radius (= 9.88 ")to estimate initial spatial extent for simple fitting
[Wed Mar 28 10:34:54 2012] Initial guess for spatial extent in simple fitting = 9.88"
[Wed Mar 28 10:34:54 2012] source mask rpix=2.3, npix_max = 30, mask sum = 18, frac = 0.586
[Wed Mar 28 10:34:54 2012] Giving source the simple spatial ID 58 for pass 0, mean size = 9.88"
[Thu Mar 29 00:24:07 2012] fullrun_mos2_xmm0412591401_pi300-10000_cl_pass0_src58.ximg exists
[Thu Mar 29 00:24:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591401_pi300-10000_cl_pass0_src58.csv
[Thu Mar 29 00:24:07 2012] fullrun_mos2_xmm0412591401_pi300-10000_cl_pass0_src58_1.ximg exists
[Thu Mar 29 00:24:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591401_pi300-10000_cl_pass0_src58.csv
[Thu Mar 29 00:24:07 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412591401_pi300-10000_cl_pass0_src58_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412591401_pi300-10000_cl_pass0_src58.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 29 00:24:10 2012] fullrun_mos2_xmm0412591401_pi300-10000_cl_pass0_tfrozen_src58.ximg exists
[Thu Mar 29 00:24:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591401_pi300-10000_cl_pass0_tfrozen_src58.csv
[Thu Mar 29 00:24:10 2012] fullrun_mos2_xmm0412591401_pi300-10000_cl_pass0_tfrozen_src58_1.ximg exists
[Thu Mar 29 00:24:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591401_pi300-10000_cl_pass0_tfrozen_src58.csv
[Thu Mar 29 00:24:10 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412591401_pi300-10000_cl_pass0_tfrozen_src58_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412591401_pi300-10000_cl_pass0_tfrozen_src58.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 29 00:25:26 2012] Spatial fit model total counts = 17491.500000, observed total counts = 5979.000000
[Thu Mar 29 00:25:26 2012] Poor agreement between spatial fit and data for source 113
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Mar 29 00:25:26 2012] Spatial fit model total counts = 10867.900000, observed total counts = 10208.000000
[Thu Mar 29 00:25:26 2012] Offset between fit and detection position for source 113 = 2.175686 pixels
[Thu Mar 29 00:25:26 2012] Warning, changing simple spatial fit ID from 58 to 88
[Thu Mar 29 00:25:26 2012] 10669.253500 total counts/ 10596.700000 bgd. counts: snr = 0.704812
Spatial fit parameters:
  Offset between fit and detection position for source 113 = 2.175686 pixels
  Position = (387.3, 263.9) = 5 34 8.82 21 57 2.5
  Extent = 8.3 (2.5-15.0)", rotation angle = 0
  Source counts = 72.6 +/- 103.3
  Background counts = 10596.7
  Rate = 0.003 +/- 0.005
  Deleting source due to low Poisson probability