[Wed Mar 28 00:29:48 2012] Detection parameters:
  Position = (298.6, 398.9) = 5 34 36.55 22 6 50.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 357.7 +/- 39.7
  Background counts = 611.6
  Rate = 0.02 +/- 0.003

[Wed Mar 28 00:29:50 2012] Off-axis axis estimate = 7.29'
[Wed Mar 28 00:39:22 2012] Using EEF radius (= 10.07 ")to estimate initial spatial extent for simple fitting
[Wed Mar 28 00:39:22 2012] Initial guess for spatial extent in simple fitting = 10.07"
[Wed Mar 28 00:39:22 2012] source mask rpix=2.3, npix_max = 31, mask sum = 29, frac = 0.915
[Wed Mar 28 00:39:22 2012] Giving source the simple spatial ID 88 for pass 0, mean size = 10.07"
[Wed Mar 28 10:34:49 2012] fullrun_mos1_xmm0412591401_pi300-10000_cl_pass0_src88.ximg exists
[Wed Mar 28 10:34:49 2012] fullrun_mos1_xmm0412591401_pi300-10000_cl_pass0_src88_1.ximg exists
[Wed Mar 28 10:34:49 2012] Fit fullrun_mos1_xmm0412591401_pi300-10000_cl_pass0_src88 appears to have run properly
[Wed Mar 28 10:34:53 2012] fullrun_mos1_xmm0412591401_pi300-10000_cl_pass0_tfrozen_src88.ximg exists
[Wed Mar 28 10:34:53 2012] fullrun_mos1_xmm0412591401_pi300-10000_cl_pass0_tfrozen_src88_1.ximg exists
[Wed Mar 28 10:34:53 2012] Fit fullrun_mos1_xmm0412591401_pi300-10000_cl_pass0_tfrozen_src88 appears to have run properly
[Thu Mar 29 00:24:53 2012] Spatial fit model total counts = 6273.740000, observed total counts = 6435.000000
[Thu Mar 29 00:24:53 2012] Offset between fit and detection position for source 96 = 3.244243 pixels
[Thu Mar 29 00:24:53 2012] Warning, changing simple spatial fit ID from 88 to 37
[Thu Mar 29 00:24:53 2012] 6055.940000 total counts/ 5519.210000 bgd. counts: snr = 7.224660
Spatial fit parameters:
  Offset between fit and detection position for source 96 = 3.244243 pixels
  Position = (295.4, 399.1) = 5 34 37.56 22 6 51.0
  Extent = 17.7 (13.2-20.4)", rotation angle = 0
  Source counts = 536.7 +/- 77.8
  Background counts = 5519.2
  Rate = 0.02 +/- 0.004
[Thu Mar 29 00:24:54 2012] Vigneting correction estimate = 1.000000
[Thu Mar 29 00:24:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar 29 00:24:54 2012] Assessing source extent using major axis lower bound
[Thu Mar 29 00:24:54 2012] Source does appear to be extended
[Thu Mar 29 00:24:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar 29 00:24:54 2012] Source is confused with source 9
[Thu Mar 29 00:26:12 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Mar 29 00:26:12 2012] Initial guess for spatial extent in simple fitting = 17.66"
[Thu Mar 29 00:26:12 2012] source mask rpix=4.1, npix_max = 83, mask sum = 81, frac = 0.974
[Thu Mar 29 00:26:12 2012] Giving source the simple spatial ID 76 for pass 1, mean size = 17.66"
[Thu Mar 29 11:04:48 2012] fullrun_mos1_xmm0412591401_pi300-10000_cl_pass1_src76.ximg exists
[Thu Mar 29 11:04:48 2012] fullrun_mos1_xmm0412591401_pi300-10000_cl_pass1_src76_1.ximg exists
[Thu Mar 29 11:04:48 2012] Fit fullrun_mos1_xmm0412591401_pi300-10000_cl_pass1_src76 appears to have run properly
[Thu Mar 29 11:04:54 2012] fullrun_mos1_xmm0412591401_pi300-10000_cl_pass1_tfrozen_src76.ximg exists
[Thu Mar 29 11:04:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591401_pi300-10000_cl_pass1_tfrozen_src76.csv
[Thu Mar 29 11:04:54 2012] fullrun_mos1_xmm0412591401_pi300-10000_cl_pass1_tfrozen_src76_1.ximg exists
[Thu Mar 29 11:04:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591401_pi300-10000_cl_pass1_tfrozen_src76.csv
[Thu Mar 29 11:04:54 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412591401_pi300-10000_cl_pass1_tfrozen_src76_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412591401_pi300-10000_cl_pass1_tfrozen_src76.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 30 21:00:59 2012] Spatial fit model total counts = 7160.910000, observed total counts = 5281.000000
[Fri Mar 30 21:00:59 2012] Poor agreement between spatial fit and data for source 96
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Mar 30 21:00:59 2012] Warning, spatial fit 76 centroid is now closest to src. 78
[Fri Mar 30 21:01:00 2012] Vigneting correction estimate = 1.000000
[Fri Mar 30 21:01:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 30 21:01:00 2012] Assessing source extent using major axis lower bound
[Fri Mar 30 21:01:00 2012] Source does appear to be extended
[Fri Mar 30 21:01:00 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar 30 21:02:45 2012] XMMSAS src. selection expression = ellipse(25650.152000, 34676.810000, 1059.348030, 1059.348030, 0.000000, X, Y)
[Fri Mar 30 21:02:45 2012] Writing source region out to fullrun_mos1_xmm0412591401_pi300-10000_pass1_cl_src96_src.reg
[Fri Mar 30 21:02:45 2012] Extracting stamp from image fullrun_mos1_xmm0412591401_pi300-10000_cl_sm2.00.img.gz, (235, 338) - (356, 460)
[Fri Mar 30 21:02:45 2012] XMMSAS bgd. selection expression = annulus(25650.152000, 34676.810000, 1765.580051, 3531.160102, X, Y) && !ellipse(27666.990600, 35274.359800, 1341.008039, 1341.008039, 0.000000, X, Y) && !ellipse(29582.219025, 34487.215729, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29025.095642, 34413.281128, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23136.084015, 34438.416290, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25903.938782, 34307.449005, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27548.979004, 34265.443787, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28468.238000, 34025.380000, 1631.832047, 1631.832047, 0.000000, X, Y) && !ellipse(29986.659637, 34104.995056, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29478.131256, 35432.695557, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24925.310913, 34369.826263, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24333.005737, 34438.307434, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28242.062660, 38696.928000, 1843.344053, 1843.344053, 0.000000, X, Y) && !ellipse(27662.834000, 38105.250000, 1544.568044, 1544.568044, 0.000000, X, Y) && !ellipse(27866.071200, 36028.628200, 1697.768049, 1697.768049, 0.000000, X, Y) && !ellipse(24851.891388, 34923.930878, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27784.459600, 38702.626000, 2896.784083, 2896.784083, 0.000000, X, Y) && !ellipse(28305.614563, 37969.945099, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27259.559570, 37622.115021, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28355.651245, 37195.831482, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27864.765340, 36793.333400, 1381.712040, 1381.712040, 0.000000, X, Y) && !ellipse(28245.223267, 36487.594452, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23476.291504, 35775.268677, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30297.376000, 35673.288200, 1371.584039, 1371.584039, 0.000000, X, Y) && !ellipse(24883.850000, 35480.212000, 204.073606, 204.073606, -0.000000, X, Y) && !ellipse(28221.484000, 34683.762000, 1075.368031, 1075.368031, 0.000000, X, Y) && !ellipse(25578.620000, 35157.678000, 1087.016031, 1087.016031, 0.000000, X, Y) && !ellipse(30098.756000, 35513.850000, 1077.880031, 1077.880031, 0.000000, X, Y) && !ellipse(21605.134384, 35093.481049, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24345.917145, 34838.770813, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23601.269043, 34833.734222, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22802.808807, 34519.747803, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21761.921829, 34529.048370, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23987.394000, 34531.286000, 1632.592047, 1632.592047, 0.000000, X, Y) && !ellipse(30847.294200, 35470.608000, 1850.128053, 1850.128053, 0.000000, X, Y)
[Fri Mar 30 21:02:45 2012] Writing fullrun_mos1_xmm0412591401_pi300-10000_pass1_cl_src96.gif
[Fri Mar 30 23:05:24 2012] Mean detx,y = (7393.67, -2014.60) 
[Fri Mar 30 23:05:26 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Mar 30 23:06:04 2012] Binned source spectrum to 10 counts/bin
[Fri Mar 30 23:06:04 2012] Setting source spectrum file to fullrun_mos1_xmm0412591401_pi300-10000_pass1_cl_src96_src_b10.pi.gz
[Fri Mar 30 23:06:04 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0412591401_pi300-10000_pass1_cl_src96_bgd.pi.gz
[Sat Mar 31 11:26:36 2012] Updating aperture counts using extracted products
[Sat Mar 31 11:26:36 2012] Error reading totcts from fullrun_mos1_xmm0412591401_pi300-10000_pass1_cl_src96_src_b10.pi.gz
[Sat Mar 31 11:26:44 2012] Calculating source flux in energy range 0.30-8.00
[Sat Mar 31 11:26:44 2012] Using photon index=1.80, rate=0.0246, arf fullrun_mos1_xmm0412591401_pi300-10000_pass1_cl_src96.arf
[Sat Mar 31 11:26:44 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Mar 31 11:26:44 2012] Updating source flux to 3.8e-13
[Sat Mar 31 11:27:12 2012] Flag p found in src. 96 procflags, skipping spectral fitting
[Sat Mar 31 11:27:12 2012] Flag c found in src. 96 procflags, skipping spectral fitting