[Wed Mar 28 00:29:47 2012] Detection parameters:
  Position = (292.9, 405.8) = 5 34 38.34 22 7 22.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 200.0 +/- 34.5
  Background counts = 511.0
  Rate = 0.01 +/- 0.003

[Wed Mar 28 00:29:50 2012] Off-axis axis estimate = 7.80'
[Wed Mar 28 00:39:22 2012] Using EEF radius (= 10.33 ")to estimate initial spatial extent for simple fitting
[Wed Mar 28 00:39:22 2012] Initial guess for spatial extent in simple fitting = 10.33"
[Wed Mar 28 00:39:22 2012] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.090
[Wed Mar 28 00:39:22 2012] Giving source the simple spatial ID 74 for pass 0, mean size = 10.33"
[Wed Mar 28 10:34:48 2012] fullrun_mos1_xmm0412591401_pi300-10000_cl_pass0_src74.ximg exists
[Wed Mar 28 10:34:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591401_pi300-10000_cl_pass0_src74.csv
[Wed Mar 28 10:34:48 2012] fullrun_mos1_xmm0412591401_pi300-10000_cl_pass0_src74_1.ximg exists
[Wed Mar 28 10:34:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591401_pi300-10000_cl_pass0_src74.csv
[Wed Mar 28 10:34:48 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412591401_pi300-10000_cl_pass0_src74_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412591401_pi300-10000_cl_pass0_src74.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 28 10:34:52 2012] fullrun_mos1_xmm0412591401_pi300-10000_cl_pass0_tfrozen_src74.ximg exists
[Wed Mar 28 10:34:53 2012] fullrun_mos1_xmm0412591401_pi300-10000_cl_pass0_tfrozen_src74_1.ximg exists
[Wed Mar 28 10:34:53 2012] Fit fullrun_mos1_xmm0412591401_pi300-10000_cl_pass0_tfrozen_src74 appears to have run properly
[Thu Mar 29 00:24:53 2012] Spatial fit model total counts = 5246.780000, observed total counts = 5423.000000
[Thu Mar 29 00:24:53 2012] Offset between fit and detection position for source 82 = 2.018972 pixels
[Thu Mar 29 00:24:53 2012] Warning, changing simple spatial fit ID from 74 to 70
[Thu Mar 29 00:24:53 2012] 5061.931000 total counts/ 4813.300000 bgd. counts: snr = 3.583718
Spatial fit parameters:
  Offset between fit and detection position for source 82 = 2.018972 pixels
  Position = (294.6, 404.7) = 5 34 37.82 22 7 15.0
  Extent = 13.6 (10.4-19.8)", rotation angle = 0
  Source counts = 248.6 +/- 71.1
  Background counts = 4813.3
  Rate = 0.01 +/- 0.003
[Thu Mar 29 00:24:54 2012] Vigneting correction estimate = 1.000000
[Thu Mar 29 00:24:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar 29 00:24:54 2012] Assessing source extent using major axis lower bound
[Thu Mar 29 00:24:54 2012] Source does appear to be extended
[Thu Mar 29 00:24:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar 29 00:24:54 2012] Source is confused with source 45
[Thu Mar 29 00:24:54 2012] Source is confused with source 96
[Thu Mar 29 00:26:12 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Mar 29 00:26:12 2012] Initial guess for spatial extent in simple fitting = 13.59"
[Thu Mar 29 00:26:12 2012] source mask rpix=3.1, npix_max = 52, mask sum = 49, frac = 0.933
[Thu Mar 29 00:26:12 2012] Giving source the simple spatial ID 64 for pass 1, mean size = 13.59"
[Thu Mar 29 11:04:47 2012] fullrun_mos1_xmm0412591401_pi300-10000_cl_pass1_src64.ximg exists
[Thu Mar 29 11:04:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591401_pi300-10000_cl_pass1_src64.csv
[Thu Mar 29 11:04:47 2012] fullrun_mos1_xmm0412591401_pi300-10000_cl_pass1_src64_1.ximg exists
[Thu Mar 29 11:04:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591401_pi300-10000_cl_pass1_src64.csv
[Thu Mar 29 11:04:47 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412591401_pi300-10000_cl_pass1_src64_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412591401_pi300-10000_cl_pass1_src64.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 29 11:04:52 2012] fullrun_mos1_xmm0412591401_pi300-10000_cl_pass1_tfrozen_src64.ximg exists
[Thu Mar 29 11:04:53 2012] fullrun_mos1_xmm0412591401_pi300-10000_cl_pass1_tfrozen_src64_1.ximg exists
[Thu Mar 29 11:04:53 2012] Fit fullrun_mos1_xmm0412591401_pi300-10000_cl_pass1_tfrozen_src64 appears to have run properly
[Fri Mar 30 21:00:59 2012] Warning, spatial fit 64 centroid is now closest to src. 78
[Fri Mar 30 21:01:00 2012] Vigneting correction estimate = 1.000000
[Fri Mar 30 21:01:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 30 21:01:00 2012] Assessing source extent using major axis lower bound
[Fri Mar 30 21:01:00 2012] Source does appear to be extended
[Fri Mar 30 21:01:00 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar 30 21:02:44 2012] XMMSAS src. selection expression = ellipse(25578.620000, 35157.678000, 815.262023, 815.262023, 0.000000, X, Y)
[Fri Mar 30 21:02:44 2012] Writing source region out to fullrun_mos1_xmm0412591401_pi300-10000_pass1_cl_src82_src.reg
[Fri Mar 30 21:02:44 2012] Extracting stamp from image fullrun_mos1_xmm0412591401_pi300-10000_cl_sm2.00.img.gz, (248, 358) - (341, 452)
[Fri Mar 30 21:02:44 2012] XMMSAS bgd. selection expression = annulus(25578.620000, 35157.678000, 1358.770039, 2717.540078, X, Y) && !ellipse(27666.990600, 35274.359800, 1341.008039, 1341.008039, 0.000000, X, Y) && !ellipse(29025.095642, 34413.281128, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23136.084015, 34438.416290, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25903.938782, 34307.449005, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27548.979004, 34265.443787, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28468.238000, 34025.380000, 1631.832047, 1631.832047, 0.000000, X, Y) && !ellipse(24925.310913, 34369.826263, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24333.005737, 34438.307434, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28242.062660, 38696.928000, 1843.344053, 1843.344053, 0.000000, X, Y) && !ellipse(27662.834000, 38105.250000, 1544.568044, 1544.568044, 0.000000, X, Y) && !ellipse(27866.071200, 36028.628200, 1697.768049, 1697.768049, 0.000000, X, Y) && !ellipse(24851.891388, 34923.930878, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27784.459600, 38702.626000, 2896.784083, 2896.784083, 0.000000, X, Y) && !ellipse(28305.614563, 37969.945099, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27259.559570, 37622.115021, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28355.651245, 37195.831482, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27864.765340, 36793.333400, 1381.712040, 1381.712040, 0.000000, X, Y) && !ellipse(28245.223267, 36487.594452, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23476.291504, 35775.268677, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24883.850000, 35480.212000, 204.073606, 204.073606, -0.000000, X, Y) && !ellipse(28221.484000, 34683.762000, 1075.368031, 1075.368031, 0.000000, X, Y) && !ellipse(24345.917145, 34838.770813, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23601.269043, 34833.734222, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25650.152000, 34676.810000, 1412.464041, 1412.464041, 0.000000, X, Y) && !ellipse(22802.808807, 34519.747803, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23987.394000, 34531.286000, 1632.592047, 1632.592047, 0.000000, X, Y)
[Fri Mar 30 21:02:44 2012] Writing fullrun_mos1_xmm0412591401_pi300-10000_pass1_cl_src82.gif
[Fri Mar 30 22:57:07 2012] Mean detx,y = (7748.13, -2143.62) 
[Fri Mar 30 22:57:10 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Mar 30 22:57:29 2012] Binned source spectrum to 10 counts/bin
[Fri Mar 30 22:57:29 2012] Setting source spectrum file to fullrun_mos1_xmm0412591401_pi300-10000_pass1_cl_src82_src_b10.pi.gz
[Fri Mar 30 22:57:29 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0412591401_pi300-10000_pass1_cl_src82_bgd.pi.gz
[Sat Mar 31 11:26:35 2012] Updating aperture counts using extracted products
[Sat Mar 31 11:26:35 2012] Error reading totcts from fullrun_mos1_xmm0412591401_pi300-10000_pass1_cl_src82_src_b10.pi.gz
[Sat Mar 31 11:26:43 2012] Calculating source flux in energy range 0.30-8.00
[Sat Mar 31 11:26:43 2012] Using photon index=1.80, rate=0.0114, arf fullrun_mos1_xmm0412591401_pi300-10000_pass1_cl_src82.arf
[Sat Mar 31 11:26:43 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Mar 31 11:26:44 2012] Updating source flux to 1.9e-13
[Sat Mar 31 11:27:12 2012] Flag c found in src. 82 procflags, skipping spectral fitting