[Wed Mar 28 00:29:47 2012] Detection parameters:
  Position = (385.4, 406.9) = 5 34 9.39 22 7 25.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 299.1 +/- 31.6
  Background counts = 445.4
  Rate = 0.01 +/- 0.001

[Wed Mar 28 00:29:50 2012] Off-axis axis estimate = 10.08'
[Wed Mar 28 00:39:22 2012] Using EEF radius (= 11.47 ")to estimate initial spatial extent for simple fitting
[Wed Mar 28 00:39:22 2012] Initial guess for spatial extent in simple fitting = 11.47"
[Wed Mar 28 00:39:22 2012] source mask rpix=2.6, npix_max = 39, mask sum = 30, frac = 0.763
[Wed Mar 28 00:39:22 2012] Giving source the simple spatial ID 71 for pass 0, mean size = 11.47"
[Wed Mar 28 10:34:48 2012] fullrun_mos1_xmm0412591401_pi300-10000_cl_pass0_src71.ximg exists
[Wed Mar 28 10:34:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591401_pi300-10000_cl_pass0_src71.csv
[Wed Mar 28 10:34:48 2012] fullrun_mos1_xmm0412591401_pi300-10000_cl_pass0_src71_1.ximg exists
[Wed Mar 28 10:34:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591401_pi300-10000_cl_pass0_src71.csv
[Wed Mar 28 10:34:48 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412591401_pi300-10000_cl_pass0_src71_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412591401_pi300-10000_cl_pass0_src71.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 28 10:34:52 2012] fullrun_mos1_xmm0412591401_pi300-10000_cl_pass0_tfrozen_src71.ximg exists
[Wed Mar 28 10:34:52 2012] fullrun_mos1_xmm0412591401_pi300-10000_cl_pass0_tfrozen_src71_1.ximg exists
[Wed Mar 28 10:34:52 2012] Fit fullrun_mos1_xmm0412591401_pi300-10000_cl_pass0_tfrozen_src71 appears to have run properly
[Thu Mar 29 00:24:53 2012] Source 79 is offset by 0.999486 and 1.752122 pixels which is larger than
2 X fitted extent = 1.303278 x 1.303278, not incorporating fit results
[Thu Mar 29 00:24:53 2012] Warning, spatial fit 71 centroid is now closest to src. 70
[Thu Mar 29 00:24:54 2012] Spatial fit model total counts = 6858.610000, observed total counts = 4901.000000
[Thu Mar 29 00:24:54 2012] Poor agreement between spatial fit and data for source 79
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Mar 29 00:24:54 2012] Vigneting correction estimate = 1.000000
[Thu Mar 29 00:24:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar 29 00:24:54 2012] Assessing source extent using major
[Thu Mar 29 00:24:54 2012] Source does appear to be extended
[Thu Mar 29 00:24:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar 29 00:24:54 2012] Source is confused with source 76
[Thu Mar 29 00:26:12 2012] Using EEF radius (= 11.47 ")to estimate initial spatial extent for simple fitting
[Thu Mar 29 00:26:12 2012] Initial guess for spatial extent in simple fitting = 11.47"
[Thu Mar 29 00:26:12 2012] source mask rpix=2.6, npix_max = 39, mask sum = 30, frac = 0.763
[Thu Mar 29 00:26:12 2012] Giving source the simple spatial ID 62 for pass 1, mean size = 11.47"
[Thu Mar 29 11:04:47 2012] fullrun_mos1_xmm0412591401_pi300-10000_cl_pass1_src62.ximg exists
[Thu Mar 29 11:04:47 2012] fullrun_mos1_xmm0412591401_pi300-10000_cl_pass1_src62_1.ximg exists
[Thu Mar 29 11:04:47 2012] Fit fullrun_mos1_xmm0412591401_pi300-10000_cl_pass1_src62 appears to have run properly
[Thu Mar 29 11:04:52 2012] fullrun_mos1_xmm0412591401_pi300-10000_cl_pass1_tfrozen_src62.ximg exists
[Thu Mar 29 11:04:52 2012] fullrun_mos1_xmm0412591401_pi300-10000_cl_pass1_tfrozen_src62_1.ximg exists
[Thu Mar 29 11:04:52 2012] Fit fullrun_mos1_xmm0412591401_pi300-10000_cl_pass1_tfrozen_src62 appears to have run properly
[Fri Mar 30 21:00:59 2012] Warning, spatial fit 62 centroid is now closest to src. 72
[Fri Mar 30 21:00:59 2012] Source 79 is offset by -1.748008 and 0.629985 pixels which is larger than
2 X fitted extent = 1.278543 x 1.278543, not incorporating fit results
[Fri Mar 30 21:00:59 2012] Source 79 is offset by -2.628031 and -0.247855 pixels which is larger than
2 X fitted extent = 1.277117 x 1.277117, not incorporating fit results
[Fri Mar 30 21:01:00 2012] Vigneting correction estimate = 1.000000
[Fri Mar 30 21:01:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 30 21:01:00 2012] Assessing source extent using major
[Fri Mar 30 21:01:00 2012] Source does appear to be extended
[Fri Mar 30 21:01:00 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar 30 21:02:44 2012] XMMSAS src. selection expression = ellipse(33481.185303, 35348.334656, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Mar 30 21:02:44 2012] Writing source region out to fullrun_mos1_xmm0412591401_pi300-10000_pass1_cl_src79_src.reg
[Fri Mar 30 21:02:44 2012] Extracting stamp from image fullrun_mos1_xmm0412591401_pi300-10000_cl_sm2.00.img.gz, (348, 369) - (423, 444)
[Fri Mar 30 21:02:44 2012] XMMSAS bgd. selection expression = annulus(33481.185303, 35348.334656, 1087.500000, 2175.000000, X, Y) && !ellipse(35314.634369, 32400.208710, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31966.801727, 34009.573303, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32642.512000, 36483.938000, 2301.696066, 2301.696066, 0.000000, X, Y) && !ellipse(32505.716919, 35606.764587, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36043.564000, 35945.236000, 1938.904056, 1938.904056, 0.000000, X, Y) && !ellipse(31838.170000, 35439.384000, 1723.496050, 1723.496050, 0.000000, X, Y) && !ellipse(35139.973267, 35450.351501, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33719.960052, 35645.692627, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30297.376000, 35673.288200, 1371.584039, 1371.584039, 0.000000, X, Y) && !ellipse(34515.181152, 35112.528229, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33711.179871, 34871.446259, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30804.268000, 35003.224000, 1414.624041, 435.500013, 97.094480, X, Y) && !ellipse(32797.018768, 34830.696869, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31606.376190, 34562.432709, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34534.000000, 34479.802887, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33284.752960, 34399.554626, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35455.889893, 34073.270111, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34273.846954, 34096.074158, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32531.125549, 34008.410400, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33604.978699, 34239.461670, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33316.761993, 34017.955231, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34597.606537, 33534.716003, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35437.851624, 33204.175476, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34479.194885, 32985.318756, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35878.867920, 32653.134766, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34419.653198, 32483.289886, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30847.294200, 35470.608000, 1850.128053, 1850.128053, 0.000000, X, Y)
[Fri Mar 30 21:02:44 2012] Writing fullrun_mos1_xmm0412591401_pi300-10000_pass1_cl_src79.gif
[Fri Mar 30 22:55:48 2012] Mean detx,y = (8371.75, 5629.94) 
[Fri Mar 30 22:55:50 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Mar 30 22:56:09 2012] Binned source spectrum to 10 counts/bin
[Fri Mar 30 22:56:09 2012] Setting source spectrum file to fullrun_mos1_xmm0412591401_pi300-10000_pass1_cl_src79_src_b10.pi.gz
[Fri Mar 30 22:56:09 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0412591401_pi300-10000_pass1_cl_src79_bgd.pi.gz
[Sat Mar 31 01:50:31 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Mar 31 01:50:31 2012] rmf not generated due to insufficient counts
[Sat Mar 31 11:26:35 2012] Updating aperture counts using extracted products
[Sat Mar 31 11:26:35 2012] Error reading totcts from fullrun_mos1_xmm0412591401_pi300-10000_pass1_cl_src79_src_b10.pi.gz
[Sat Mar 31 11:26:43 2012] Calculating source flux in energy range 0.30-8.00
[Sat Mar 31 11:26:43 2012] Using photon index=1.80, rate=0.0137, arf fullrun_mos1_xmm0412591401_pi300-10000_pass1_cl_src79.arf
[Sat Mar 31 11:26:43 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Mar 31 11:26:43 2012] Updating source flux to 2.9e-13
[Sat Mar 31 11:27:12 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting