[Wed Mar 28 00:29:47 2012] Detection parameters:
  Position = (350.0, 408.8) = 5 34 20.46 22 7 34.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 187.9 +/- 36.4
  Background counts = 649.6
  Rate = 0.01 +/- 0.003

[Wed Mar 28 00:29:50 2012] Off-axis axis estimate = 8.83'
[Wed Mar 28 00:39:22 2012] Using EEF radius (= 10.84 ")to estimate initial spatial extent for simple fitting
[Wed Mar 28 00:39:22 2012] Initial guess for spatial extent in simple fitting = 10.84"
[Wed Mar 28 00:39:22 2012] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.005
[Wed Mar 28 00:39:22 2012] Giving source the simple spatial ID 69 for pass 0, mean size = 10.84"
[Wed Mar 28 10:34:48 2012] fullrun_mos1_xmm0412591401_pi300-10000_cl_pass0_src69.ximg exists
[Wed Mar 28 10:34:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591401_pi300-10000_cl_pass0_src69.csv
[Wed Mar 28 10:34:48 2012] fullrun_mos1_xmm0412591401_pi300-10000_cl_pass0_src69_1.ximg exists
[Wed Mar 28 10:34:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591401_pi300-10000_cl_pass0_src69.csv
[Wed Mar 28 10:34:48 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412591401_pi300-10000_cl_pass0_src69_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412591401_pi300-10000_cl_pass0_src69.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 28 10:34:52 2012] fullrun_mos1_xmm0412591401_pi300-10000_cl_pass0_tfrozen_src69.ximg exists
[Wed Mar 28 10:34:52 2012] fullrun_mos1_xmm0412591401_pi300-10000_cl_pass0_tfrozen_src69_1.ximg exists
[Wed Mar 28 10:34:52 2012] Fit fullrun_mos1_xmm0412591401_pi300-10000_cl_pass0_tfrozen_src69 appears to have run properly
[Thu Mar 29 00:24:53 2012] Source 77 is offset by 1.209622 and -5.649789 pixels which is larger than
2 X fitted extent = 1.240515 x 1.240515, not incorporating fit results
[Thu Mar 29 00:24:53 2012] Warning: source 69 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 77 at 12.475861 pixels away
[Thu Mar 29 00:24:54 2012] Vigneting correction estimate = 1.000000
[Thu Mar 29 00:24:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar 29 00:24:54 2012] Assessing source extent using major
[Thu Mar 29 00:24:54 2012] Source does appear to be extended
[Thu Mar 29 00:24:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar 29 00:24:54 2012] Source is confused with source 88
[Thu Mar 29 00:24:54 2012] Source is confused with source 148
[Thu Mar 29 00:26:12 2012] Using EEF radius (= 10.84 ")to estimate initial spatial extent for simple fitting
[Thu Mar 29 00:26:12 2012] Initial guess for spatial extent in simple fitting = 10.84"
[Thu Mar 29 00:26:12 2012] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.005
[Thu Mar 29 00:26:12 2012] Giving source the simple spatial ID 60 for pass 1, mean size = 10.84"
[Thu Mar 29 11:04:47 2012] fullrun_mos1_xmm0412591401_pi300-10000_cl_pass1_src60.ximg exists
[Thu Mar 29 11:04:47 2012] fullrun_mos1_xmm0412591401_pi300-10000_cl_pass1_src60_1.ximg exists
[Thu Mar 29 11:04:47 2012] Fit fullrun_mos1_xmm0412591401_pi300-10000_cl_pass1_src60 appears to have run properly
[Thu Mar 29 11:04:52 2012] fullrun_mos1_xmm0412591401_pi300-10000_cl_pass1_tfrozen_src60.ximg exists
[Thu Mar 29 11:04:52 2012] fullrun_mos1_xmm0412591401_pi300-10000_cl_pass1_tfrozen_src60_1.ximg exists
[Thu Mar 29 11:04:52 2012] Fit fullrun_mos1_xmm0412591401_pi300-10000_cl_pass1_tfrozen_src60 appears to have run properly
[Fri Mar 30 21:00:58 2012] Source 77 is offset by 0.524220 and 1.270924 pixels which is larger than
2 X fitted extent = 1.185421 x 1.185421, not incorporating fit results
[Fri Mar 30 21:00:59 2012] Spatial fit model total counts = 7522.910000, observed total counts = 7784.000000
[Fri Mar 30 21:00:59 2012] Offset between fit and detection position for source 77 = 2.199952 pixels
[Fri Mar 30 21:00:59 2012] Warning, changing simple spatial fit ID from 60 to 16
[Fri Mar 30 21:00:59 2012] 7167.520000 total counts/ 6583.260000 bgd. counts: snr = 7.200881
Spatial fit parameters:
  Offset between fit and detection position for source 77 = 2.199952 pixels
  Position = (348.8, 410.6) = 5 34 20.84 22 7 40.7
  Extent = 17.1 (13.6-20.7)", rotation angle = 0
  Source counts = 584.3 +/- 84.7
  Background counts = 6583.3
  Rate = 0.03 +/- 0.004
[Fri Mar 30 21:01:00 2012] Vigneting correction estimate = 1.000000
[Fri Mar 30 21:01:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 30 21:01:00 2012] Assessing source extent using major axis lower bound
[Fri Mar 30 21:01:00 2012] Source does appear to be extended
[Fri Mar 30 21:01:00 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar 30 21:02:43 2012] XMMSAS src. selection expression = ellipse(30297.376000, 35673.288200, 1028.688030, 1028.688030, 0.000000, X, Y)
[Fri Mar 30 21:02:43 2012] Writing source region out to fullrun_mos1_xmm0412591401_pi300-10000_pass1_cl_src77_src.reg
[Fri Mar 30 21:02:43 2012] Extracting stamp from image fullrun_mos1_xmm0412591401_pi300-10000_cl_sm2.00.img.gz, (290, 351) - (408, 470)
[Fri Mar 30 21:02:43 2012] XMMSAS bgd. selection expression = annulus(30297.376000, 35673.288200, 1714.480049, 3428.960099, X, Y) && !ellipse(27666.990600, 35274.359800, 1341.008039, 1341.008039, 0.000000, X, Y) && !ellipse(29582.219025, 34487.215729, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29025.095642, 34413.281128, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27548.979004, 34265.443787, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28468.238000, 34025.380000, 1631.832047, 1631.832047, 0.000000, X, Y) && !ellipse(29986.659637, 34104.995056, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29478.131256, 35432.695557, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27792.296000, 40474.758000, 2022.256058, 2022.256058, 0.000000, X, Y) && !ellipse(28242.062660, 38696.928000, 1843.344053, 1843.344053, 0.000000, X, Y) && !ellipse(27662.834000, 38105.250000, 1544.568044, 1544.568044, 0.000000, X, Y) && !ellipse(27866.071200, 36028.628200, 1697.768049, 1697.768049, 0.000000, X, Y) && !ellipse(27784.459600, 38702.626000, 2896.784083, 2896.784083, 0.000000, X, Y) && !ellipse(31966.801727, 34009.573303, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28305.614563, 37969.945099, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27259.559570, 37622.115021, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28355.651245, 37195.831482, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27864.765340, 36793.333400, 1381.712040, 1381.712040, 0.000000, X, Y) && !ellipse(28245.223267, 36487.594452, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32642.512000, 36483.938000, 2301.696066, 2301.696066, 0.000000, X, Y) && !ellipse(32505.716919, 35606.764587, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31838.170000, 35439.384000, 1723.496050, 1723.496050, 0.000000, X, Y) && !ellipse(33719.960052, 35645.692627, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33481.185303, 35348.334656, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28221.484000, 34683.762000, 1075.368031, 1075.368031, 0.000000, X, Y) && !ellipse(30098.756000, 35513.850000, 1077.880031, 1077.880031, 0.000000, X, Y) && !ellipse(34515.181152, 35112.528229, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33711.179871, 34871.446259, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30804.268000, 35003.224000, 1414.624041, 435.500013, 97.094480, X, Y) && !ellipse(32797.018768, 34830.696869, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31606.376190, 34562.432709, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25650.152000, 34676.810000, 1412.464041, 1412.464041, 0.000000, X, Y) && !ellipse(34534.000000, 34479.802887, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33284.752960, 34399.554626, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34273.846954, 34096.074158, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32531.125549, 34008.410400, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33604.978699, 34239.461670, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33316.761993, 34017.955231, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34479.194885, 32985.318756, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34419.653198, 32483.289886, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34441.039459, 31963.459045, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30847.294200, 35470.608000, 1850.128053, 1850.128053, 0.000000, X, Y)
[Fri Mar 30 21:02:43 2012] Writing fullrun_mos1_xmm0412591401_pi300-10000_pass1_cl_src77.gif
[Fri Mar 30 22:54:34 2012] Mean detx,y = (8469.67, 2513.64) 
[Fri Mar 30 22:54:36 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Mar 30 22:55:01 2012] Binned source spectrum to 10 counts/bin
[Fri Mar 30 22:55:01 2012] Setting source spectrum file to fullrun_mos1_xmm0412591401_pi300-10000_pass1_cl_src77_src_b10.pi.gz
[Fri Mar 30 22:55:01 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0412591401_pi300-10000_pass1_cl_src77_bgd.pi.gz
[Sat Mar 31 11:26:35 2012] Updating aperture counts using extracted products
[Sat Mar 31 11:26:35 2012] Error reading totcts from fullrun_mos1_xmm0412591401_pi300-10000_pass1_cl_src77_src_b10.pi.gz
[Sat Mar 31 11:26:43 2012] Calculating source flux in energy range 0.30-8.00
[Sat Mar 31 11:26:43 2012] Using photon index=1.80, rate=0.0267, arf fullrun_mos1_xmm0412591401_pi300-10000_pass1_cl_src77.arf
[Sat Mar 31 11:26:43 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Mar 31 11:26:43 2012] Updating source flux to 4.3e-13
[Sat Mar 31 11:27:12 2012] Flag b found in src. 77 procflags, skipping spectral fitting
[Sat Mar 31 11:27:12 2012] Flag c found in src. 77 procflags, skipping spectral fitting