[Wed Mar 28 00:29:47 2012] Detection parameters:
  Position = (404.5, 408.0) = 5 34 3.42 22 7 30.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 155.1 +/- 29.9
  Background counts = 340.0
  Rate = 0.01 +/- 0.002

[Wed Mar 28 00:29:50 2012] Off-axis axis estimate = 11.06'
[Wed Mar 28 00:39:22 2012] Using EEF radius (= 11.96 ")to estimate initial spatial extent for simple fitting
[Wed Mar 28 00:39:22 2012] Initial guess for spatial extent in simple fitting = 11.96"
[Wed Mar 28 00:39:22 2012] source mask rpix=2.7, npix_max = 42, mask sum = 42, frac = 0.995
[Wed Mar 28 00:39:22 2012] Giving source the simple spatial ID 67 for pass 0, mean size = 11.96"
[Wed Mar 28 10:34:48 2012] fullrun_mos1_xmm0412591401_pi300-10000_cl_pass0_src67.ximg exists
[Wed Mar 28 10:34:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591401_pi300-10000_cl_pass0_src67.csv
[Wed Mar 28 10:34:48 2012] fullrun_mos1_xmm0412591401_pi300-10000_cl_pass0_src67_1.ximg exists
[Wed Mar 28 10:34:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591401_pi300-10000_cl_pass0_src67.csv
[Wed Mar 28 10:34:48 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412591401_pi300-10000_cl_pass0_src67_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412591401_pi300-10000_cl_pass0_src67.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 28 10:34:52 2012] fullrun_mos1_xmm0412591401_pi300-10000_cl_pass0_tfrozen_src67.ximg exists
[Wed Mar 28 10:34:52 2012] fullrun_mos1_xmm0412591401_pi300-10000_cl_pass0_tfrozen_src67_1.ximg exists
[Wed Mar 28 10:34:52 2012] Fit fullrun_mos1_xmm0412591401_pi300-10000_cl_pass0_tfrozen_src67 appears to have run properly
[Thu Mar 29 00:24:53 2012] Warning, spatial fit 67 centroid is now closest to src. 84
[Thu Mar 29 00:24:54 2012] Vigneting correction estimate = 1.000000
[Thu Mar 29 00:24:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar 29 00:24:54 2012] Assessing source extent using major
[Thu Mar 29 00:24:54 2012] Source does appear to be extended
[Thu Mar 29 00:24:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar 29 00:24:54 2012] Source is confused with source 73
[Thu Mar 29 00:26:12 2012] Using EEF radius (= 11.96 ")to estimate initial spatial extent for simple fitting
[Thu Mar 29 00:26:12 2012] Initial guess for spatial extent in simple fitting = 11.96"
[Thu Mar 29 00:26:12 2012] source mask rpix=2.7, npix_max = 42, mask sum = 42, frac = 0.995
[Thu Mar 29 00:26:12 2012] Giving source the simple spatial ID 58 for pass 1, mean size = 11.96"
[Thu Mar 29 11:04:47 2012] fullrun_mos1_xmm0412591401_pi300-10000_cl_pass1_src58.ximg exists
[Thu Mar 29 11:04:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591401_pi300-10000_cl_pass1_src58.csv
[Thu Mar 29 11:04:47 2012] fullrun_mos1_xmm0412591401_pi300-10000_cl_pass1_src58_1.ximg exists
[Thu Mar 29 11:04:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591401_pi300-10000_cl_pass1_src58.csv
[Thu Mar 29 11:04:47 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412591401_pi300-10000_cl_pass1_src58_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412591401_pi300-10000_cl_pass1_src58.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 29 11:04:52 2012] fullrun_mos1_xmm0412591401_pi300-10000_cl_pass1_tfrozen_src58.ximg exists
[Thu Mar 29 11:04:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591401_pi300-10000_cl_pass1_tfrozen_src58.csv
[Thu Mar 29 11:04:52 2012] fullrun_mos1_xmm0412591401_pi300-10000_cl_pass1_tfrozen_src58_1.ximg exists
[Thu Mar 29 11:04:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591401_pi300-10000_cl_pass1_tfrozen_src58.csv
[Thu Mar 29 11:04:52 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412591401_pi300-10000_cl_pass1_tfrozen_src58_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412591401_pi300-10000_cl_pass1_tfrozen_src58.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 30 21:00:59 2012] Warning: source 56 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 75 at 32.581506 pixels away
[Fri Mar 30 21:00:59 2012] Warning, spatial fit 58 centroid is now closest to src. 76
[Fri Mar 30 21:00:59 2012] Warning: source 82 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 75 at 14.159073 pixels away
[Fri Mar 30 21:01:00 2012] Vigneting correction estimate = 1.000000
[Fri Mar 30 21:01:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 30 21:01:00 2012] Assessing source extent using major
[Fri Mar 30 21:01:00 2012] Source does appear to be extended
[Fri Mar 30 21:01:00 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar 30 21:02:43 2012] XMMSAS src. selection expression = ellipse(35139.973267, 35450.351501, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Mar 30 21:02:43 2012] Writing source region out to fullrun_mos1_xmm0412591401_pi300-10000_pass1_cl_src75_src.reg
[Fri Mar 30 21:02:43 2012] Extracting stamp from image fullrun_mos1_xmm0412591401_pi300-10000_cl_sm2.00.img.gz, (367, 371) - (442, 446)
[Fri Mar 30 21:02:43 2012] XMMSAS bgd. selection expression = annulus(35139.973267, 35450.351501, 1087.500000, 2175.000000, X, Y) && !ellipse(32642.512000, 36483.938000, 2301.696066, 2301.696066, 0.000000, X, Y) && !ellipse(32505.716919, 35606.764587, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36043.564000, 35945.236000, 1938.904056, 1938.904056, 0.000000, X, Y) && !ellipse(31838.170000, 35439.384000, 1723.496050, 1723.496050, 0.000000, X, Y) && !ellipse(33719.960052, 35645.692627, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33481.185303, 35348.334656, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34515.181152, 35112.528229, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33711.179871, 34871.446259, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32797.018768, 34830.696869, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34534.000000, 34479.802887, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33284.752960, 34399.554626, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35455.889893, 34073.270111, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34273.846954, 34096.074158, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32531.125549, 34008.410400, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33604.978699, 34239.461670, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33316.761993, 34017.955231, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34597.606537, 33534.716003, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35437.851624, 33204.175476, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34479.194885, 32985.318756, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35878.867920, 32653.134766, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34419.653198, 32483.289886, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Mar 30 21:02:43 2012] Writing fullrun_mos1_xmm0412591401_pi300-10000_pass1_cl_src75.gif
[Fri Mar 30 22:53:15 2012] Mean detx,y = (8564.71, 7331.98) 
[Fri Mar 30 22:53:17 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Mar 30 22:53:34 2012] Binned source spectrum to 10 counts/bin
[Fri Mar 30 22:53:35 2012] Setting source spectrum file to fullrun_mos1_xmm0412591401_pi300-10000_pass1_cl_src75_src_b10.pi.gz
[Fri Mar 30 22:53:35 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0412591401_pi300-10000_pass1_cl_src75_bgd.pi.gz
[Sat Mar 31 01:38:28 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Mar 31 01:38:28 2012] rmf not generated due to insufficient counts
[Sat Mar 31 11:26:34 2012] Updating aperture counts using extracted products
[Sat Mar 31 11:26:34 2012] Error reading totcts from fullrun_mos1_xmm0412591401_pi300-10000_pass1_cl_src75_src_b10.pi.gz
[Sat Mar 31 11:26:43 2012] Calculating source flux in energy range 0.30-8.00
[Sat Mar 31 11:26:43 2012] Using photon index=1.80, rate=0.0128, arf fullrun_mos1_xmm0412591401_pi300-10000_pass1_cl_src75.arf
[Sat Mar 31 11:26:43 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Mar 31 11:26:43 2012] Updating source flux to 2.5e-13
[Sat Mar 31 11:27:12 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting