[Wed Mar 28 00:29:47 2012] Detection parameters:
  Position = (409.9, 408.9) = 5 34 1.71 22 7 37.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 126.9 +/- 28.6
  Background counts = 326.1
  Rate = 0.01 +/- 0.002

[Wed Mar 28 00:29:50 2012] Off-axis axis estimate = 11.38'
[Wed Mar 28 00:39:22 2012] Using EEF radius (= 12.12 ")to estimate initial spatial extent for simple fitting
[Wed Mar 28 00:39:22 2012] Initial guess for spatial extent in simple fitting = 12.12"
[Wed Mar 28 00:39:22 2012] source mask rpix=2.8, npix_max = 43, mask sum = 36, frac = 0.834
[Wed Mar 28 00:39:22 2012] Giving source the simple spatial ID 65 for pass 0, mean size = 12.12"
[Wed Mar 28 10:34:48 2012] fullrun_mos1_xmm0412591401_pi300-10000_cl_pass0_src65.ximg exists
[Wed Mar 28 10:34:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591401_pi300-10000_cl_pass0_src65.csv
[Wed Mar 28 10:34:48 2012] fullrun_mos1_xmm0412591401_pi300-10000_cl_pass0_src65_1.ximg exists
[Wed Mar 28 10:34:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591401_pi300-10000_cl_pass0_src65.csv
[Wed Mar 28 10:34:48 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412591401_pi300-10000_cl_pass0_src65_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412591401_pi300-10000_cl_pass0_src65.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 28 10:34:52 2012] fullrun_mos1_xmm0412591401_pi300-10000_cl_pass0_tfrozen_src65.ximg exists
[Wed Mar 28 10:34:52 2012] fullrun_mos1_xmm0412591401_pi300-10000_cl_pass0_tfrozen_src65_1.ximg exists
[Wed Mar 28 10:34:52 2012] Fit fullrun_mos1_xmm0412591401_pi300-10000_cl_pass0_tfrozen_src65 appears to have run properly
[Thu Mar 29 00:24:53 2012] Spatial fit model total counts = 4498.950000, observed total counts = 4499.000000
[Thu Mar 29 00:24:53 2012] Offset between fit and detection position for source 73 = 6.884555 pixels
[Thu Mar 29 00:24:53 2012] 4276.543000 total counts/ 3993.930000 bgd. counts: snr = 4.471898
Spatial fit parameters:
  Offset between fit and detection position for source 73 = 6.884555 pixels
  Position = (414.9, 413.7) = 5 34 0.16 22 7 54.1
  Extent = 24.2 (24.2-48.5)", rotation angle = 0
  Source counts = 282.6 +/- 65.4
  Background counts = 3993.9
  Rate = 0.01 +/- 0.003
[Thu Mar 29 00:24:54 2012] Vigneting correction estimate = 1.000000
[Thu Mar 29 00:24:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar 29 00:24:54 2012] Assessing source extent using major axis lower bound
[Thu Mar 29 00:24:54 2012] Source does appear to be extended
[Thu Mar 29 00:24:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar 29 00:24:54 2012] Source is confused with source 75
[Thu Mar 29 00:26:12 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Mar 29 00:26:12 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Mar 29 00:26:12 2012] Initial guess for spatial extent in simple fitting = 24.24"
[Thu Mar 29 00:26:12 2012] source mask rpix=5.6, npix_max = 147, mask sum = 144, frac = 0.977
[Thu Mar 29 00:26:12 2012] Giving source the simple spatial ID 56 for pass 1, mean size = 24.24"
[Thu Mar 29 11:04:47 2012] fullrun_mos1_xmm0412591401_pi300-10000_cl_pass1_src56.ximg exists
[Thu Mar 29 11:04:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591401_pi300-10000_cl_pass1_src56.csv
[Thu Mar 29 11:04:47 2012] fullrun_mos1_xmm0412591401_pi300-10000_cl_pass1_src56_1.ximg exists
[Thu Mar 29 11:04:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591401_pi300-10000_cl_pass1_src56.csv
[Thu Mar 29 11:04:47 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412591401_pi300-10000_cl_pass1_src56_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412591401_pi300-10000_cl_pass1_src56.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 29 11:04:52 2012] fullrun_mos1_xmm0412591401_pi300-10000_cl_pass1_tfrozen_src56.ximg exists
[Thu Mar 29 11:04:52 2012] fullrun_mos1_xmm0412591401_pi300-10000_cl_pass1_tfrozen_src56_1.ximg exists
[Thu Mar 29 11:04:52 2012] Fit fullrun_mos1_xmm0412591401_pi300-10000_cl_pass1_tfrozen_src56 appears to have run properly
[Fri Mar 30 21:00:59 2012] Warning, spatial fit 56 centroid is now closest to src. 75
[Fri Mar 30 21:01:00 2012] Vigneting correction estimate = 1.000000
[Fri Mar 30 21:01:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 30 21:01:00 2012] Assessing source extent using major axis lower bound
[Fri Mar 30 21:01:00 2012] Source does appear to be extended
[Fri Mar 30 21:01:00 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar 30 21:02:42 2012] XMMSAS src. selection expression = ellipse(36043.564000, 35945.236000, 1454.178042, 1454.178042, 0.000000, X, Y)
[Fri Mar 30 21:02:42 2012] Writing source region out to fullrun_mos1_xmm0412591401_pi300-10000_pass1_cl_src73_src.reg
[Fri Mar 30 21:02:42 2012] Extracting stamp from image fullrun_mos1_xmm0412591401_pi300-10000_cl_sm2.00.img.gz, (331, 330) - (498, 497)
[Fri Mar 30 21:02:43 2012] XMMSAS bgd. selection expression = annulus(36043.564000, 35945.236000, 2423.630070, 4847.260139, X, Y) && !ellipse(34242.857452, 31083.765533, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35314.634369, 32400.208710, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31966.801727, 34009.573303, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32642.512000, 36483.938000, 2301.696066, 2301.696066, 0.000000, X, Y) && !ellipse(32505.716919, 35606.764587, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31838.170000, 35439.384000, 1723.496050, 1723.496050, 0.000000, X, Y) && !ellipse(35139.973267, 35450.351501, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33719.960052, 35645.692627, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30297.376000, 35673.288200, 1371.584039, 1371.584039, 0.000000, X, Y) && !ellipse(33481.185303, 35348.334656, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34515.181152, 35112.528229, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33711.179871, 34871.446259, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30804.268000, 35003.224000, 1414.624041, 435.500013, 97.094480, X, Y) && !ellipse(32797.018768, 34830.696869, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31606.376190, 34562.432709, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34534.000000, 34479.802887, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33284.752960, 34399.554626, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35455.889893, 34073.270111, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34273.846954, 34096.074158, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32531.125549, 34008.410400, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33604.978699, 34239.461670, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33316.761993, 34017.955231, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34597.606537, 33534.716003, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35437.851624, 33204.175476, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34479.194885, 32985.318756, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35878.867920, 32653.134766, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34419.653198, 32483.289886, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35891.123535, 32144.139099, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34441.039459, 31963.459045, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34877.112091, 31614.479340, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34915.814453, 30576.373505, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36028.308000, 30201.654000, 1089.752031, 1089.752031, 0.000000, X, Y) && !ellipse(30847.294200, 35470.608000, 1850.128053, 1850.128053, 0.000000, X, Y)
[Fri Mar 30 21:02:43 2012] Writing fullrun_mos1_xmm0412591401_pi300-10000_pass1_cl_src73.gif
[Fri Mar 30 22:43:14 2012] Mean detx,y = (9033.12, 8142.39) 
[Fri Mar 30 22:43:16 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Mar 30 22:44:19 2012] Binned source spectrum to 10 counts/bin
[Fri Mar 30 22:44:19 2012] Setting source spectrum file to fullrun_mos1_xmm0412591401_pi300-10000_pass1_cl_src73_src_b10.pi.gz
[Fri Mar 30 22:44:19 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0412591401_pi300-10000_pass1_cl_src73_bgd.pi.gz
[Sat Mar 31 11:26:34 2012] Updating aperture counts using extracted products
[Sat Mar 31 11:26:34 2012] Error reading totcts from fullrun_mos1_xmm0412591401_pi300-10000_pass1_cl_src73_src_b10.pi.gz
[Sat Mar 31 11:26:43 2012] Calculating source flux in energy range 0.30-8.00
[Sat Mar 31 11:26:43 2012] Using photon index=1.80, rate=0.0129, arf fullrun_mos1_xmm0412591401_pi300-10000_pass1_cl_src73.arf
[Sat Mar 31 11:26:43 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Mar 31 11:26:43 2012] Updating source flux to 2.4e-13
[Sat Mar 31 11:27:12 2012] Flag c found in src. 73 procflags, skipping spectral fitting