[Wed Mar 28 00:29:47 2012] Detection parameters:
  Position = (270.4, 411.8) = 5 34 45.39 22 7 43.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 152.7 +/- 31.2
  Background counts = 419.8
  Rate = 0.01 +/- 0.002

[Wed Mar 28 00:29:50 2012] Off-axis axis estimate = 8.46'
[Wed Mar 28 00:39:22 2012] Using EEF radius (= 10.66 ")to estimate initial spatial extent for simple fitting
[Wed Mar 28 00:39:22 2012] Initial guess for spatial extent in simple fitting = 10.66"
[Wed Mar 28 00:39:22 2012] source mask rpix=2.5, npix_max = 34, mask sum = 36, frac = 1.034
[Wed Mar 28 00:39:22 2012] Giving source the simple spatial ID 63 for pass 0, mean size = 10.66"
[Wed Mar 28 10:34:48 2012] fullrun_mos1_xmm0412591401_pi300-10000_cl_pass0_src63.ximg exists
[Wed Mar 28 10:34:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591401_pi300-10000_cl_pass0_src63.csv
[Wed Mar 28 10:34:48 2012] fullrun_mos1_xmm0412591401_pi300-10000_cl_pass0_src63_1.ximg exists
[Wed Mar 28 10:34:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591401_pi300-10000_cl_pass0_src63.csv
[Wed Mar 28 10:34:48 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412591401_pi300-10000_cl_pass0_src63_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412591401_pi300-10000_cl_pass0_src63.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 28 10:34:52 2012] fullrun_mos1_xmm0412591401_pi300-10000_cl_pass0_tfrozen_src63.ximg exists
[Wed Mar 28 10:34:52 2012] fullrun_mos1_xmm0412591401_pi300-10000_cl_pass0_tfrozen_src63_1.ximg exists
[Wed Mar 28 10:34:52 2012] Fit fullrun_mos1_xmm0412591401_pi300-10000_cl_pass0_tfrozen_src63 appears to have run properly
[Thu Mar 29 00:24:53 2012] Warning, spatial fit 63 centroid is now closest to src. 80
[Thu Mar 29 00:24:53 2012] Source 71 is offset by -8.215086 and -3.847532 pixels which is larger than
2 X fitted extent = 1.201876 x 1.201876, not incorporating fit results
[Thu Mar 29 00:24:54 2012] Source 71 is offset by 4.140730 and 0.326054 pixels which is larger than
2 X fitted extent = 1.965035 x 1.965035, not incorporating fit results
[Thu Mar 29 00:24:54 2012] Source 71 is offset by -1.017155 and 4.350399 pixels which is larger than
2 X fitted extent = 1.440791 x 1.440791, not incorporating fit results
[Thu Mar 29 00:24:54 2012] Vigneting correction estimate = 1.000000
[Thu Mar 29 00:24:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar 29 00:24:54 2012] Assessing source extent using major
[Thu Mar 29 00:24:54 2012] Source does appear to be extended
[Thu Mar 29 00:24:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar 29 00:26:12 2012] Using EEF radius (= 10.66 ")to estimate initial spatial extent for simple fitting
[Thu Mar 29 00:26:12 2012] Initial guess for spatial extent in simple fitting = 10.66"
[Thu Mar 29 00:26:12 2012] source mask rpix=2.5, npix_max = 34, mask sum = 36, frac = 1.034
[Thu Mar 29 00:26:12 2012] Giving source the simple spatial ID 54 for pass 1, mean size = 10.66"
[Thu Mar 29 11:04:47 2012] fullrun_mos1_xmm0412591401_pi300-10000_cl_pass1_src54.ximg exists
[Thu Mar 29 11:04:47 2012] fullrun_mos1_xmm0412591401_pi300-10000_cl_pass1_src54_1.ximg exists
[Thu Mar 29 11:04:47 2012] Fit fullrun_mos1_xmm0412591401_pi300-10000_cl_pass1_src54 appears to have run properly
[Thu Mar 29 11:04:52 2012] fullrun_mos1_xmm0412591401_pi300-10000_cl_pass1_tfrozen_src54.ximg exists
[Thu Mar 29 11:04:52 2012] fullrun_mos1_xmm0412591401_pi300-10000_cl_pass1_tfrozen_src54_1.ximg exists
[Thu Mar 29 11:04:52 2012] Fit fullrun_mos1_xmm0412591401_pi300-10000_cl_pass1_tfrozen_src54 appears to have run properly
[Fri Mar 30 21:00:59 2012] Warning, spatial fit 54 centroid is now closest to src. 89
[Fri Mar 30 21:00:59 2012] Source 71 is offset by -8.272397 and -2.793739 pixels which is larger than
2 X fitted extent = 2.555352 x 2.555352, not incorporating fit results
[Fri Mar 30 21:00:59 2012] Source 71 is offset by 4.413603 and 1.033939 pixels which is larger than
2 X fitted extent = 1.180179 x 1.180179, not incorporating fit results
[Fri Mar 30 21:00:59 2012] Source 71 is offset by -1.015201 and 4.498491 pixels which is larger than
2 X fitted extent = 1.248763 x 1.248763, not incorporating fit results
[Fri Mar 30 21:01:00 2012] Vigneting correction estimate = 1.000000
[Fri Mar 30 21:01:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 30 21:01:00 2012] Assessing source extent using major
[Fri Mar 30 21:01:00 2012] Source does appear to be extended
[Fri Mar 30 21:01:00 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar 30 21:02:42 2012] XMMSAS src. selection expression = ellipse(23476.291504, 35775.268677, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Mar 30 21:02:42 2012] Writing source region out to fullrun_mos1_xmm0412591401_pi300-10000_pass1_cl_src71_src.reg
[Fri Mar 30 21:02:42 2012] Extracting stamp from image fullrun_mos1_xmm0412591401_pi300-10000_cl_sm2.00.img.gz, (233, 374) - (308, 449)
[Fri Mar 30 21:02:42 2012] XMMSAS bgd. selection expression = annulus(23476.291504, 35775.268677, 1087.500000, 2175.000000, X, Y) && !ellipse(23136.084015, 34438.416290, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25903.938782, 34307.449005, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24925.310913, 34369.826263, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20692.485321, 33291.249817, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24333.005737, 34438.307434, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24851.891388, 34923.930878, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27784.459600, 38702.626000, 2896.784083, 2896.784083, 0.000000, X, Y) && !ellipse(24883.850000, 35480.212000, 204.073606, 204.073606, -0.000000, X, Y) && !ellipse(25578.620000, 35157.678000, 1087.016031, 1087.016031, 0.000000, X, Y) && !ellipse(21605.134384, 35093.481049, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24345.917145, 34838.770813, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23601.269043, 34833.734222, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20962.001328, 34828.941895, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25650.152000, 34676.810000, 1412.464041, 1412.464041, 0.000000, X, Y) && !ellipse(22802.808807, 34519.747803, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21761.921829, 34529.048370, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23987.394000, 34531.286000, 1632.592047, 1632.592047, 0.000000, X, Y)
[Fri Mar 30 21:02:42 2012] Writing fullrun_mos1_xmm0412591401_pi300-10000_pass1_cl_src71.gif
[Fri Mar 30 22:42:02 2012] Mean detx,y = (8290.11, -4288.47) 
[Fri Mar 30 22:42:05 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Mar 30 22:42:23 2012] Binned source spectrum to 10 counts/bin
[Fri Mar 30 22:42:24 2012] Setting source spectrum file to fullrun_mos1_xmm0412591401_pi300-10000_pass1_cl_src71_src_b10.pi.gz
[Fri Mar 30 22:42:24 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0412591401_pi300-10000_pass1_cl_src71_bgd.pi.gz
[Sat Mar 31 01:25:57 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Mar 31 01:25:57 2012] rmf not generated due to insufficient counts
[Sat Mar 31 11:26:34 2012] Updating aperture counts using extracted products
[Sat Mar 31 11:26:34 2012] Error reading totcts from fullrun_mos1_xmm0412591401_pi300-10000_pass1_cl_src71_src_b10.pi.gz
[Sat Mar 31 11:26:43 2012] Calculating source flux in energy range 0.30-8.00
[Sat Mar 31 11:26:43 2012] Using photon index=1.80, rate=0.0121, arf fullrun_mos1_xmm0412591401_pi300-10000_pass1_cl_src71.arf
[Sat Mar 31 11:26:43 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Mar 31 11:26:43 2012] Updating source flux to 2.3e-13
[Sat Mar 31 11:27:12 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting