[Wed Mar 28 00:29:47 2012] Detection parameters:
  Position = (313.9, 433.0) = 5 34 31.77 22 9 18.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 259.7 +/- 36.0
  Background counts = 450.5
  Rate = 0.02 +/- 0.003

[Wed Mar 28 00:29:50 2012] Off-axis axis estimate = 9.82'
[Wed Mar 28 00:39:22 2012] Using EEF radius (= 11.34 ")to estimate initial spatial extent for simple fitting
[Wed Mar 28 00:39:22 2012] Initial guess for spatial extent in simple fitting = 11.34"
[Wed Mar 28 00:39:22 2012] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.933
[Wed Mar 28 00:39:22 2012] Giving source the simple spatial ID 57 for pass 0, mean size = 11.34"
[Wed Mar 28 10:34:48 2012] fullrun_mos1_xmm0412591401_pi300-10000_cl_pass0_src57.ximg exists
[Wed Mar 28 10:34:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591401_pi300-10000_cl_pass0_src57.csv
[Wed Mar 28 10:34:48 2012] fullrun_mos1_xmm0412591401_pi300-10000_cl_pass0_src57_1.ximg exists
[Wed Mar 28 10:34:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591401_pi300-10000_cl_pass0_src57.csv
[Wed Mar 28 10:34:48 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412591401_pi300-10000_cl_pass0_src57_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412591401_pi300-10000_cl_pass0_src57.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 28 10:34:52 2012] fullrun_mos1_xmm0412591401_pi300-10000_cl_pass0_tfrozen_src57.ximg exists
[Wed Mar 28 10:34:52 2012] fullrun_mos1_xmm0412591401_pi300-10000_cl_pass0_tfrozen_src57_1.ximg exists
[Wed Mar 28 10:34:52 2012] Fit fullrun_mos1_xmm0412591401_pi300-10000_cl_pass0_tfrozen_src57 appears to have run properly
[Thu Mar 29 00:24:53 2012] Warning, spatial fit 57 centroid is now closest to src. 68
[Thu Mar 29 00:24:54 2012] Vigneting correction estimate = 1.000000
[Thu Mar 29 00:24:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar 29 00:24:54 2012] Assessing source extent using major
[Thu Mar 29 00:24:54 2012] Source does appear to be extended
[Thu Mar 29 00:24:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar 29 00:24:54 2012] Source is confused with source 43
[Thu Mar 29 00:24:54 2012] Source is confused with source 68
[Thu Mar 29 00:26:12 2012] Using EEF radius (= 11.34 ")to estimate initial spatial extent for simple fitting
[Thu Mar 29 00:26:12 2012] Initial guess for spatial extent in simple fitting = 11.34"
[Thu Mar 29 00:26:12 2012] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.933
[Thu Mar 29 00:26:12 2012] Giving source the simple spatial ID 49 for pass 1, mean size = 11.34"
[Thu Mar 29 11:04:46 2012] fullrun_mos1_xmm0412591401_pi300-10000_cl_pass1_src49.ximg exists
[Thu Mar 29 11:04:47 2012] fullrun_mos1_xmm0412591401_pi300-10000_cl_pass1_src49_1.ximg exists
[Thu Mar 29 11:04:47 2012] Fit fullrun_mos1_xmm0412591401_pi300-10000_cl_pass1_src49 appears to have run properly
[Thu Mar 29 11:04:51 2012] fullrun_mos1_xmm0412591401_pi300-10000_cl_pass1_tfrozen_src49.ximg exists
[Thu Mar 29 11:04:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591401_pi300-10000_cl_pass1_tfrozen_src49.csv
[Thu Mar 29 11:04:51 2012] fullrun_mos1_xmm0412591401_pi300-10000_cl_pass1_tfrozen_src49_1.ximg exists
[Thu Mar 29 11:04:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591401_pi300-10000_cl_pass1_tfrozen_src49.csv
[Thu Mar 29 11:04:52 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412591401_pi300-10000_cl_pass1_tfrozen_src49_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412591401_pi300-10000_cl_pass1_tfrozen_src49.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 30 21:00:59 2012] Warning: source 49 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 65 at 13.836739 pixels away
[Fri Mar 30 21:01:00 2012] Vigneting correction estimate = 1.000000
[Fri Mar 30 21:01:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 30 21:01:00 2012] Assessing source extent using major
[Fri Mar 30 21:01:00 2012] Source does appear to be extended
[Fri Mar 30 21:01:00 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar 30 21:02:41 2012] XMMSAS src. selection expression = ellipse(27259.559570, 37622.115021, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Mar 30 21:02:41 2012] Writing source region out to fullrun_mos1_xmm0412591401_pi300-10000_pass1_cl_src65_src.reg
[Fri Mar 30 21:02:41 2012] Extracting stamp from image fullrun_mos1_xmm0412591401_pi300-10000_cl_sm2.00.img.gz, (276, 395) - (351, 470)
[Fri Mar 30 21:02:42 2012] XMMSAS bgd. selection expression = annulus(27259.559570, 37622.115021, 1087.500000, 2175.000000, X, Y) && !ellipse(27666.990600, 35274.359800, 1341.008039, 1341.008039, 0.000000, X, Y) && !ellipse(28468.238000, 34025.380000, 1631.832047, 1631.832047, 0.000000, X, Y) && !ellipse(29478.131256, 35432.695557, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28064.561798, 40058.351318, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27792.296000, 40474.758000, 2022.256058, 2022.256058, 0.000000, X, Y) && !ellipse(28242.062660, 38696.928000, 1843.344053, 1843.344053, 0.000000, X, Y) && !ellipse(27662.834000, 38105.250000, 1544.568044, 1544.568044, 0.000000, X, Y) && !ellipse(27866.071200, 36028.628200, 1697.768049, 1697.768049, 0.000000, X, Y) && !ellipse(24851.891388, 34923.930878, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27784.459600, 38702.626000, 2896.784083, 2896.784083, 0.000000, X, Y) && !ellipse(28305.614563, 37969.945099, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28355.651245, 37195.831482, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27864.765340, 36793.333400, 1381.712040, 1381.712040, 0.000000, X, Y) && !ellipse(28245.223267, 36487.594452, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30297.376000, 35673.288200, 1371.584039, 1371.584039, 0.000000, X, Y) && !ellipse(24883.850000, 35480.212000, 204.073606, 204.073606, -0.000000, X, Y) && !ellipse(28221.484000, 34683.762000, 1075.368031, 1075.368031, 0.000000, X, Y) && !ellipse(25578.620000, 35157.678000, 1087.016031, 1087.016031, 0.000000, X, Y) && !ellipse(30098.756000, 35513.850000, 1077.880031, 1077.880031, 0.000000, X, Y) && !ellipse(30804.268000, 35003.224000, 1414.624041, 435.500013, 97.094480, X, Y) && !ellipse(24345.917145, 34838.770813, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25650.152000, 34676.810000, 1412.464041, 1412.464041, 0.000000, X, Y) && !ellipse(23987.394000, 34531.286000, 1632.592047, 1632.592047, 0.000000, X, Y) && !ellipse(30847.294200, 35470.608000, 1850.128053, 1850.128053, 0.000000, X, Y)
[Fri Mar 30 21:02:42 2012] Writing fullrun_mos1_xmm0412591401_pi300-10000_pass1_cl_src65.gif
[Fri Mar 30 22:37:41 2012] Mean detx,y = (10341.10, -569.91) 
[Fri Mar 30 22:37:43 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Mar 30 22:38:01 2012] Binned source spectrum to 10 counts/bin
[Fri Mar 30 22:38:02 2012] Setting source spectrum file to fullrun_mos1_xmm0412591401_pi300-10000_pass1_cl_src65_src_b10.pi.gz
[Fri Mar 30 22:38:02 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0412591401_pi300-10000_pass1_cl_src65_bgd.pi.gz
[Sat Mar 31 01:15:38 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Mar 31 01:15:38 2012] rmf not generated due to insufficient counts
[Sat Mar 31 11:26:34 2012] Updating aperture counts using extracted products
[Sat Mar 31 11:26:34 2012] Error reading totcts from fullrun_mos1_xmm0412591401_pi300-10000_pass1_cl_src65_src_b10.pi.gz
[Sat Mar 31 11:26:43 2012] Calculating source flux in energy range 0.30-8.00
[Sat Mar 31 11:26:43 2012] Using photon index=1.80, rate=0.0216, arf fullrun_mos1_xmm0412591401_pi300-10000_pass1_cl_src65.arf
[Sat Mar 31 11:26:43 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Mar 31 11:26:43 2012] Updating source flux to 4.3e-13
[Sat Mar 31 11:27:12 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting