[Wed Mar 28 00:29:46 2012] Detection parameters:
  Position = (391.6, 261.0) = 5 34 7.49 21 56 47.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 735.8 +/- 42.5
  Background counts = 447.6
  Rate = 0.05 +/- 0.003

[Wed Mar 28 00:29:50 2012] Off-axis axis estimate = 7.28'
[Wed Mar 28 00:39:22 2012] Using EEF radius (= 10.07 ")to estimate initial spatial extent for simple fitting
[Wed Mar 28 00:39:22 2012] Initial guess for spatial extent in simple fitting = 10.07"
[Wed Mar 28 00:39:22 2012] source mask rpix=2.3, npix_max = 31, mask sum = 24, frac = 0.758
[Wed Mar 28 00:39:22 2012] Giving source the simple spatial ID 42 for pass 0, mean size = 10.07"
[Wed Mar 28 10:34:47 2012] fullrun_mos1_xmm0412591401_pi300-10000_cl_pass0_src42.ximg exists
[Wed Mar 28 10:34:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591401_pi300-10000_cl_pass0_src42.csv
[Wed Mar 28 10:34:47 2012] fullrun_mos1_xmm0412591401_pi300-10000_cl_pass0_src42_1.ximg exists
[Wed Mar 28 10:34:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591401_pi300-10000_cl_pass0_src42.csv
[Wed Mar 28 10:34:47 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412591401_pi300-10000_cl_pass0_src42_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412591401_pi300-10000_cl_pass0_src42.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 28 10:34:51 2012] fullrun_mos1_xmm0412591401_pi300-10000_cl_pass0_tfrozen_src42.ximg exists
[Wed Mar 28 10:34:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591401_pi300-10000_cl_pass0_tfrozen_src42.csv
[Wed Mar 28 10:34:51 2012] fullrun_mos1_xmm0412591401_pi300-10000_cl_pass0_tfrozen_src42_1.ximg exists
[Wed Mar 28 10:34:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591401_pi300-10000_cl_pass0_tfrozen_src42.csv
[Wed Mar 28 10:34:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412591401_pi300-10000_cl_pass0_tfrozen_src42_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412591401_pi300-10000_cl_pass0_tfrozen_src42.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 29 00:24:53 2012] Source 50 is offset by 9.809738 and 0.834979 pixels which is larger than
2 X fitted extent = 2.444428 x 2.444428, not incorporating fit results
[Thu Mar 29 00:24:54 2012] Vigneting correction estimate = 1.000000
[Thu Mar 29 00:24:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar 29 00:24:54 2012] Assessing source extent using major
[Thu Mar 29 00:24:54 2012] Source does appear to be extended
[Thu Mar 29 00:24:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar 29 00:24:54 2012] Source is confused with source 49
[Thu Mar 29 00:24:54 2012] Source is confused with source 142
[Thu Mar 29 00:26:12 2012] Using EEF radius (= 10.07 ")to estimate initial spatial extent for simple fitting
[Thu Mar 29 00:26:12 2012] Initial guess for spatial extent in simple fitting = 10.07"
[Thu Mar 29 00:26:12 2012] source mask rpix=2.3, npix_max = 31, mask sum = 24, frac = 0.758
[Thu Mar 29 00:26:12 2012] Giving source the simple spatial ID 38 for pass 1, mean size = 10.07"
[Thu Mar 29 11:04:46 2012] fullrun_mos1_xmm0412591401_pi300-10000_cl_pass1_src38.ximg exists
[Thu Mar 29 11:04:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591401_pi300-10000_cl_pass1_src38.csv
[Thu Mar 29 11:04:46 2012] fullrun_mos1_xmm0412591401_pi300-10000_cl_pass1_src38_1.ximg exists
[Thu Mar 29 11:04:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591401_pi300-10000_cl_pass1_src38.csv
[Thu Mar 29 11:04:46 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412591401_pi300-10000_cl_pass1_src38_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412591401_pi300-10000_cl_pass1_src38.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 29 11:04:51 2012] fullrun_mos1_xmm0412591401_pi300-10000_cl_pass1_tfrozen_src38.ximg exists
[Thu Mar 29 11:04:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591401_pi300-10000_cl_pass1_tfrozen_src38.csv
[Thu Mar 29 11:04:51 2012] fullrun_mos1_xmm0412591401_pi300-10000_cl_pass1_tfrozen_src38_1.ximg exists
[Thu Mar 29 11:04:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591401_pi300-10000_cl_pass1_tfrozen_src38.csv
[Thu Mar 29 11:04:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412591401_pi300-10000_cl_pass1_tfrozen_src38_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412591401_pi300-10000_cl_pass1_tfrozen_src38.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 30 21:00:59 2012] Warning, spatial fit 38 centroid is now closest to src. 147
[Fri Mar 30 21:01:00 2012] Vigneting correction estimate = 1.000000
[Fri Mar 30 21:01:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 30 21:01:00 2012] Assessing source extent using major
[Fri Mar 30 21:01:00 2012] Source does appear to be extended
[Fri Mar 30 21:01:00 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar 30 21:02:40 2012] XMMSAS src. selection expression = ellipse(34017.039246, 22658.199982, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Mar 30 21:02:40 2012] Writing source region out to fullrun_mos1_xmm0412591401_pi300-10000_pass1_cl_src50_src.reg
[Fri Mar 30 21:02:40 2012] Extracting stamp from image fullrun_mos1_xmm0412591401_pi300-10000_cl_sm2.00.img.gz, (354, 223) - (429, 298)
[Fri Mar 30 21:02:40 2012] XMMSAS bgd. selection expression = annulus(34017.039246, 22658.199982, 1087.500000, 2175.000000, X, Y) && !ellipse(34273.026000, 26451.744000, 1631.408047, 1631.408047, 0.000000, X, Y) && !ellipse(34131.024963, 25353.357391, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34101.827606, 24659.659302, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34045.371063, 23776.673553, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34875.123474, 25091.975067, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34718.800659, 24471.053986, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33957.871918, 23191.242249, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34794.115875, 23370.366455, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34155.472473, 20042.673538, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33968.692600, 20398.678000, 921.880027, 921.880027, 0.000000, X, Y) && !ellipse(36684.430359, 25239.533630, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35652.698000, 24792.186000, 986.112028, 986.112028, 0.000000, X, Y) && !ellipse(35230.592072, 25078.222015, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36598.702118, 24338.469788, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35088.776337, 24053.497528, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35904.624359, 24046.859955, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35573.660000, 23173.390000, 963.664028, 963.664028, 0.000000, X, Y) && !ellipse(36174.080627, 22836.846283, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35268.328003, 22386.165680, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34595.344452, 22488.817078, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35772.340179, 21797.228409, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34763.694550, 21441.113312, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34316.438934, 21111.209991, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34456.260742, 20843.363998, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33834.290924, 21791.832062, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Mar 30 21:02:40 2012] Writing fullrun_mos1_xmm0412591401_pi300-10000_pass1_cl_src50.gif
[Fri Mar 30 22:16:58 2012] Mean detx,y = (-4226.23, 6989.56) 
[Fri Mar 30 22:17:01 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Mar 30 22:17:26 2012] Binned source spectrum to 10 counts/bin
[Fri Mar 30 22:17:26 2012] Setting source spectrum file to fullrun_mos1_xmm0412591401_pi300-10000_pass1_cl_src50_src_b10.pi.gz
[Fri Mar 30 22:17:26 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0412591401_pi300-10000_pass1_cl_src50_bgd.pi.gz
[Sat Mar 31 01:04:08 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Mar 31 01:04:08 2012] rmf not generated due to insufficient counts
[Sat Mar 31 11:26:33 2012] Updating aperture counts using extracted products
[Sat Mar 31 11:26:33 2012] Error reading totcts from fullrun_mos1_xmm0412591401_pi300-10000_pass1_cl_src50_src_b10.pi.gz
[Sat Mar 31 11:26:42 2012] Calculating source flux in energy range 0.30-8.00
[Sat Mar 31 11:26:42 2012] Using photon index=1.80, rate=0.0528, arf fullrun_mos1_xmm0412591401_pi300-10000_pass1_cl_src50.arf
[Sat Mar 31 11:26:42 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Mar 31 11:26:42 2012] Updating source flux to 9.1e-13
[Sat Mar 31 11:27:12 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting