[Wed Mar 28 00:29:46 2012] Detection parameters:
  Position = (404.3, 336.9) = 5 34 3.50 22 2 15.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 585.9 +/- 45.1
  Background counts = 760.3
  Rate = 0.05 +/- 0.004

[Wed Mar 28 00:29:50 2012] Off-axis axis estimate = 8.16'
[Wed Mar 28 00:39:22 2012] Using EEF radius (= 10.51 ")to estimate initial spatial extent for simple fitting
[Wed Mar 28 00:39:22 2012] Initial guess for spatial extent in simple fitting = 10.51"
[Wed Mar 28 00:39:22 2012] source mask rpix=2.4, npix_max = 34, mask sum = 20, frac = 0.588
[Wed Mar 28 00:39:22 2012] Giving source the simple spatial ID 40 for pass 0, mean size = 10.51"
[Wed Mar 28 10:34:47 2012] fullrun_mos1_xmm0412591401_pi300-10000_cl_pass0_src40.ximg exists
[Wed Mar 28 10:34:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591401_pi300-10000_cl_pass0_src40.csv
[Wed Mar 28 10:34:47 2012] fullrun_mos1_xmm0412591401_pi300-10000_cl_pass0_src40_1.ximg exists
[Wed Mar 28 10:34:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591401_pi300-10000_cl_pass0_src40.csv
[Wed Mar 28 10:34:47 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412591401_pi300-10000_cl_pass0_src40_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412591401_pi300-10000_cl_pass0_src40.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 28 10:34:51 2012] fullrun_mos1_xmm0412591401_pi300-10000_cl_pass0_tfrozen_src40.ximg exists
[Wed Mar 28 10:34:51 2012] fullrun_mos1_xmm0412591401_pi300-10000_cl_pass0_tfrozen_src40_1.ximg exists
[Wed Mar 28 10:34:51 2012] Fit fullrun_mos1_xmm0412591401_pi300-10000_cl_pass0_tfrozen_src40 appears to have run properly
[Thu Mar 29 00:24:53 2012] Spatial fit model total counts = 10800.700000, observed total counts = 9925.000000
[Thu Mar 29 00:24:53 2012] Offset between fit and detection position for source 48 = 1.307993 pixels
[Thu Mar 29 00:24:53 2012] Warning, changing simple spatial fit ID from 40 to 31
[Thu Mar 29 00:24:53 2012] 10553.849700 total counts/ 10525.800000 bgd. counts: snr = 0.273401
Spatial fit parameters:
  Offset between fit and detection position for source 48 = 1.307993 pixels
  Position = (403.1, 337.5) = 5 34 3.85 22 2 22.7
  Extent = 2.6" x 2.6", rotation angle = 0
  Source counts = 28.0 +/- 102.7
  Background counts = 10525.8
  Rate = 0.001 +/- 0.005
  Deleting source due to low Poisson probability