[Wed Mar 28 00:29:46 2012] Detection parameters:
  Position = (394.7, 340.9) = 5 34 6.50 22 2 37.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 802.6 +/- 58.2
  Background counts = 730.5
  Rate = 0.05 +/- 0.004

[Wed Mar 28 00:29:50 2012] Off-axis axis estimate = 7.63'
[Wed Mar 28 00:39:22 2012] Using EEF radius (= 10.24 ")to estimate initial spatial extent for simple fitting
[Wed Mar 28 00:39:22 2012] Initial guess for spatial extent in simple fitting = 10.24"
[Wed Mar 28 00:39:22 2012] source mask rpix=2.4, npix_max = 32, mask sum = 30, frac = 0.920
[Wed Mar 28 00:39:22 2012] Giving source the simple spatial ID 39 for pass 0, mean size = 10.24"
[Wed Mar 28 10:34:47 2012] fullrun_mos1_xmm0412591401_pi300-10000_cl_pass0_src39.ximg exists
[Wed Mar 28 10:34:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591401_pi300-10000_cl_pass0_src39.csv
[Wed Mar 28 10:34:47 2012] fullrun_mos1_xmm0412591401_pi300-10000_cl_pass0_src39_1.ximg exists
[Wed Mar 28 10:34:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591401_pi300-10000_cl_pass0_src39.csv
[Wed Mar 28 10:34:47 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412591401_pi300-10000_cl_pass0_src39_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412591401_pi300-10000_cl_pass0_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 28 10:34:51 2012] fullrun_mos1_xmm0412591401_pi300-10000_cl_pass0_tfrozen_src39.ximg exists
[Wed Mar 28 10:34:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591401_pi300-10000_cl_pass0_tfrozen_src39.csv
[Wed Mar 28 10:34:51 2012] fullrun_mos1_xmm0412591401_pi300-10000_cl_pass0_tfrozen_src39_1.ximg exists
[Wed Mar 28 10:34:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591401_pi300-10000_cl_pass0_tfrozen_src39.csv
[Wed Mar 28 10:34:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412591401_pi300-10000_cl_pass0_tfrozen_src39_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412591401_pi300-10000_cl_pass0_tfrozen_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 29 00:24:53 2012] Warning, spatial fit 39 centroid is now closest to src. 29
[Thu Mar 29 00:24:54 2012] Vigneting correction estimate = 1.000000
[Thu Mar 29 00:24:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar 29 00:24:54 2012] Assessing source extent using major
[Thu Mar 29 00:24:54 2012] Source does appear to be extended
[Thu Mar 29 00:24:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar 29 00:24:54 2012] Source is confused with source 29
[Thu Mar 29 00:26:12 2012] Using EEF radius (= 10.24 ")to estimate initial spatial extent for simple fitting
[Thu Mar 29 00:26:12 2012] Initial guess for spatial extent in simple fitting = 10.24"
[Thu Mar 29 00:26:12 2012] source mask rpix=2.4, npix_max = 32, mask sum = 30, frac = 0.920
[Thu Mar 29 00:26:12 2012] Giving source the simple spatial ID 36 for pass 1, mean size = 10.24"
[Thu Mar 29 11:04:46 2012] fullrun_mos1_xmm0412591401_pi300-10000_cl_pass1_src36.ximg exists
[Thu Mar 29 11:04:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591401_pi300-10000_cl_pass1_src36.csv
[Thu Mar 29 11:04:46 2012] fullrun_mos1_xmm0412591401_pi300-10000_cl_pass1_src36_1.ximg exists
[Thu Mar 29 11:04:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591401_pi300-10000_cl_pass1_src36.csv
[Thu Mar 29 11:04:46 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412591401_pi300-10000_cl_pass1_src36_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412591401_pi300-10000_cl_pass1_src36.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 29 11:04:51 2012] fullrun_mos1_xmm0412591401_pi300-10000_cl_pass1_tfrozen_src36.ximg exists
[Thu Mar 29 11:04:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591401_pi300-10000_cl_pass1_tfrozen_src36.csv
[Thu Mar 29 11:04:51 2012] fullrun_mos1_xmm0412591401_pi300-10000_cl_pass1_tfrozen_src36_1.ximg exists
[Thu Mar 29 11:04:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591401_pi300-10000_cl_pass1_tfrozen_src36.csv
[Thu Mar 29 11:04:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412591401_pi300-10000_cl_pass1_tfrozen_src36_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412591401_pi300-10000_cl_pass1_tfrozen_src36.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 30 21:00:59 2012] Warning, spatial fit 36 centroid is now closest to src. 29
[Fri Mar 30 21:01:00 2012] Vigneting correction estimate = 1.000000
[Fri Mar 30 21:01:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 30 21:01:00 2012] Assessing source extent using major
[Fri Mar 30 21:01:00 2012] Source does appear to be extended
[Fri Mar 30 21:01:00 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar 30 21:02:40 2012] XMMSAS src. selection expression = ellipse(34286.564545, 29614.143097, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Mar 30 21:02:40 2012] Writing source region out to fullrun_mos1_xmm0412591401_pi300-10000_pass1_cl_src47_src.reg
[Fri Mar 30 21:02:40 2012] Extracting stamp from image fullrun_mos1_xmm0412591401_pi300-10000_cl_sm2.00.img.gz, (357, 303) - (432, 378)
[Fri Mar 30 21:02:40 2012] XMMSAS bgd. selection expression = annulus(34286.564545, 29614.143097, 1087.500000, 2175.000000, X, Y) && !ellipse(35708.266000, 27599.104000, 1462.336042, 1462.336042, 0.000000, X, Y) && !ellipse(34740.934000, 26651.992000, 998.000029, 998.000029, 0.000000, X, Y) && !ellipse(34273.026000, 26451.744000, 1631.408047, 1631.408047, 0.000000, X, Y) && !ellipse(34048.480103, 27780.845367, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34093.936859, 29090.550079, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34136.812927, 28496.213806, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34242.857452, 31083.765533, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35194.656250, 28392.250824, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35314.634369, 32400.208710, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34285.144104, 30222.370483, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35878.867920, 32653.134766, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34419.653198, 32483.289886, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35891.123535, 32144.139099, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34441.039459, 31963.459045, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34877.112091, 31614.479340, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34915.814453, 30576.373505, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36028.308000, 30201.654000, 1089.752031, 1089.752031, 0.000000, X, Y) && !ellipse(35500.956000, 29795.210000, 838.432024, 838.432024, 0.000000, X, Y) && !ellipse(35148.904785, 26782.418945, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Mar 30 21:02:40 2012] Writing fullrun_mos1_xmm0412591401_pi300-10000_pass1_cl_src47.gif
[Fri Mar 30 22:15:34 2012] Mean detx,y = (2698.58, 6908.08) 
[Fri Mar 30 22:15:37 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Mar 30 22:15:56 2012] Binned source spectrum to 10 counts/bin
[Fri Mar 30 22:15:56 2012] Setting source spectrum file to fullrun_mos1_xmm0412591401_pi300-10000_pass1_cl_src47_src_b10.pi.gz
[Fri Mar 30 22:15:56 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0412591401_pi300-10000_pass1_cl_src47_bgd.pi.gz
[Sat Mar 31 01:03:36 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Mar 31 01:03:36 2012] rmf not generated due to insufficient counts
[Sat Mar 31 11:26:33 2012] Updating aperture counts using extracted products
[Sat Mar 31 11:26:33 2012] Error reading totcts from fullrun_mos1_xmm0412591401_pi300-10000_pass1_cl_src47_src_b10.pi.gz
[Sat Mar 31 11:26:42 2012] Calculating source flux in energy range 0.30-8.00
[Sat Mar 31 11:26:42 2012] Using photon index=1.80, rate=0.0504, arf fullrun_mos1_xmm0412591401_pi300-10000_pass1_cl_src47.arf
[Sat Mar 31 11:26:42 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Mar 31 11:26:42 2012] Updating source flux to 7.9e-13
[Sat Mar 31 11:27:12 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting