[Wed Mar 28 00:29:46 2012] Detection parameters:
  Position = (290.6, 395.0) = 5 34 39.06 22 6 28.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 658.9 +/- 36.5
  Background counts = 579.9
  Rate = 0.05 +/- 0.003

[Wed Mar 28 00:29:50 2012] Off-axis axis estimate = 7.02'
[Wed Mar 28 00:39:22 2012] Using EEF radius (= 9.94 ")to estimate initial spatial extent for simple fitting
[Wed Mar 28 00:39:22 2012] Initial guess for spatial extent in simple fitting = 9.94"
[Wed Mar 28 00:39:22 2012] source mask rpix=2.3, npix_max = 31, mask sum = 16, frac = 0.516
[Wed Mar 28 00:39:22 2012] Giving source the simple spatial ID 28 for pass 0, mean size = 9.94"
[Wed Mar 28 10:34:47 2012] fullrun_mos1_xmm0412591401_pi300-10000_cl_pass0_src28.ximg exists
[Wed Mar 28 10:34:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591401_pi300-10000_cl_pass0_src28.csv
[Wed Mar 28 10:34:47 2012] fullrun_mos1_xmm0412591401_pi300-10000_cl_pass0_src28_1.ximg exists
[Wed Mar 28 10:34:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591401_pi300-10000_cl_pass0_src28.csv
[Wed Mar 28 10:34:47 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412591401_pi300-10000_cl_pass0_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412591401_pi300-10000_cl_pass0_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 28 10:34:51 2012] fullrun_mos1_xmm0412591401_pi300-10000_cl_pass0_tfrozen_src28.ximg exists
[Wed Mar 28 10:34:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591401_pi300-10000_cl_pass0_tfrozen_src28.csv
[Wed Mar 28 10:34:51 2012] fullrun_mos1_xmm0412591401_pi300-10000_cl_pass0_tfrozen_src28_1.ximg exists
[Wed Mar 28 10:34:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591401_pi300-10000_cl_pass0_tfrozen_src28.csv
[Wed Mar 28 10:34:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412591401_pi300-10000_cl_pass0_tfrozen_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412591401_pi300-10000_cl_pass0_tfrozen_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 29 00:24:53 2012] Warning, spatial fit 28 centroid is now closest to src. 78
[Thu Mar 29 00:24:54 2012] Spatial fit model total counts = 6315.640000, observed total counts = 6470.000000
[Thu Mar 29 00:24:54 2012] Offset between fit and detection position for source 36 = 2.093188 pixels
[Thu Mar 29 00:24:54 2012] Warning, changing simple spatial fit ID from 28 to 81
[Thu Mar 29 00:24:54 2012] 5991.223700 total counts/ 5918.220000 bgd. counts: snr = 0.948963
Spatial fit parameters:
  Offset between fit and detection position for source 36 = 2.093188 pixels
  Position = (289.4, 396.7) = 5 34 39.45 22 6 40.2
  Extent = 5.6 (3.5-8.6)", rotation angle = 0
  Source counts = 73.0 +/- 77.4
  Background counts = 5918.2
  Rate = 0.003 +/- 0.004
  Deleting source due to low Poisson probability