[Wed Mar 28 00:29:44 2012] Detection parameters:
  Position = (414.4, 307.0) = 5 34 0.32 22 0 33.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 3148.3 +/- 341.8
  Background counts = 649.9
  Rate = 0.3 +/- 0.03

[Wed Mar 28 00:29:50 2012] Off-axis axis estimate = 8.43'
[Wed Mar 28 00:39:22 2012] Using EEF radius (= 10.65 ")to estimate initial spatial extent for simple fitting
[Wed Mar 28 00:39:22 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Mar 28 00:39:22 2012] Initial guess for spatial extent in simple fitting = 10.65"
[Wed Mar 28 00:39:22 2012] source mask rpix=2.4, npix_max = 34, mask sum = 35, frac = 1.007
[Wed Mar 28 00:39:22 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 10.65"
[Wed Mar 28 10:34:46 2012] fullrun_mos1_xmm0412591401_pi300-10000_cl_pass0_src1.ximg exists
[Wed Mar 28 10:34:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591401_pi300-10000_cl_pass0_src1.csv
[Wed Mar 28 10:34:46 2012] fullrun_mos1_xmm0412591401_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed Mar 28 10:34:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591401_pi300-10000_cl_pass0_src1.csv
[Wed Mar 28 10:34:46 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412591401_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412591401_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 28 10:34:49 2012] fullrun_mos1_xmm0412591401_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed Mar 28 10:34:49 2012] fullrun_mos1_xmm0412591401_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Mar 28 10:34:50 2012] Fit fullrun_mos1_xmm0412591401_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Mar 29 00:24:53 2012] Warning, spatial fit 1 centroid is now closest to src. 14
[Thu Mar 29 00:24:53 2012] Source 3 is offset by -2.111312 and -5.590834 pixels which is larger than
2 X fitted extent = 1.194018 x 1.194018, not incorporating fit results
[Thu Mar 29 00:24:54 2012] Vigneting correction estimate = 1.000000
[Thu Mar 29 00:24:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar 29 00:24:54 2012] Assessing source extent using major
[Thu Mar 29 00:24:54 2012] Source does appear to be extended
[Thu Mar 29 00:24:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar 29 00:24:54 2012] Source is confused with source 14
[Thu Mar 29 00:24:54 2012] Source is confused with source 130
[Thu Mar 29 00:26:12 2012] Using EEF radius (= 10.65 ")to estimate initial spatial extent for simple fitting
[Thu Mar 29 00:26:12 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Mar 29 00:26:12 2012] Initial guess for spatial extent in simple fitting = 10.65"
[Thu Mar 29 00:26:12 2012] source mask rpix=2.4, npix_max = 34, mask sum = 35, frac = 1.007
[Thu Mar 29 00:26:12 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 10.65"
[Thu Mar 29 11:04:45 2012] fullrun_mos1_xmm0412591401_pi300-10000_cl_pass1_src1.ximg exists
[Thu Mar 29 11:04:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591401_pi300-10000_cl_pass1_src1.csv
[Thu Mar 29 11:04:45 2012] fullrun_mos1_xmm0412591401_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu Mar 29 11:04:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591401_pi300-10000_cl_pass1_src1.csv
[Thu Mar 29 11:04:45 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412591401_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412591401_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 29 11:04:49 2012] fullrun_mos1_xmm0412591401_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu Mar 29 11:04:49 2012] fullrun_mos1_xmm0412591401_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Mar 29 11:04:49 2012] Fit fullrun_mos1_xmm0412591401_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Mar 30 21:00:58 2012] Spatial fit model total counts = 10671.600000, observed total counts = 9976.000000
[Fri Mar 30 21:00:58 2012] Offset between fit and detection position for source 3 = 4.006957 pixels
[Fri Mar 30 21:00:58 2012] 9405.254000 total counts/ 8829.940000 bgd. counts: snr = 6.122462
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 4.006957 pixels
  Position = (410.6, 306.0) = 5 34 1.54 22 0 5.4
  Extent = 9.7 (8.2-11.9)", rotation angle = 0
  Source counts = 575.3 +/- 97.0
  Background counts = 8829.9
  Rate = 0.03 +/- 0.004
[Fri Mar 30 21:00:59 2012] Source 3 is offset by 1.250069 and -1.350448 pixels which is larger than
2 X fitted extent = 1.163853 x 1.163853, not incorporating fit results
[Fri Mar 30 21:01:00 2012] Vigneting correction estimate = 1.000000
[Fri Mar 30 21:01:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 30 21:01:00 2012] Assessing source extent using major axis lower bound
[Fri Mar 30 21:01:00 2012] Source does appear to be extended
[Fri Mar 30 21:01:00 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar 30 21:02:33 2012] XMMSAS src. selection expression = ellipse(35670.298000, 26570.053000, 579.681017, 579.681017, 0.000000, X, Y)
[Fri Mar 30 21:02:33 2012] Writing source region out to fullrun_mos1_xmm0412591401_pi300-10000_pass1_cl_src3_src.reg
[Fri Mar 30 21:02:33 2012] Extracting stamp from image fullrun_mos1_xmm0412591401_pi300-10000_cl_sm2.00.img.gz, (377, 273) - (444, 339)
[Fri Mar 30 21:02:33 2012] XMMSAS bgd. selection expression = annulus(35670.298000, 26570.053000, 966.135028, 1932.270056, X, Y) && !ellipse(35708.266000, 27599.104000, 1462.336042, 1462.336042, 0.000000, X, Y) && !ellipse(34740.934000, 26651.992000, 998.000029, 998.000029, 0.000000, X, Y) && !ellipse(34273.026000, 26451.744000, 1631.408047, 1631.408047, 0.000000, X, Y) && !ellipse(34355.093506, 25788.041443, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34131.024963, 25353.357391, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34101.827606, 24659.659302, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34048.480103, 27780.845367, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34787.605743, 25812.627014, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34093.936859, 29090.550079, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34136.812927, 28496.213806, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34045.371063, 23776.673553, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34875.123474, 25091.975067, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35194.656250, 28392.250824, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34718.800659, 24471.053986, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35412.764252, 26231.133972, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35148.904785, 26782.418945, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36134.533966, 26074.997009, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36684.430359, 25239.533630, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35652.698000, 24792.186000, 986.112028, 986.112028, 0.000000, X, Y) && !ellipse(35230.592072, 25078.222015, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36598.702118, 24338.469788, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35088.776337, 24053.497528, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35904.624359, 24046.859955, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Mar 30 21:02:33 2012] Writing fullrun_mos1_xmm0412591401_pi300-10000_pass1_cl_src3.gif
[Fri Mar 30 21:04:39 2012] Mean detx,y = (-305.19, 8339.46) 
[Fri Mar 30 21:04:42 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Mar 30 21:05:03 2012] Binned source spectrum to 10 counts/bin
[Fri Mar 30 21:05:03 2012] Setting source spectrum file to fullrun_mos1_xmm0412591401_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Fri Mar 30 21:05:03 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0412591401_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Sat Mar 31 11:26:30 2012] Updating aperture counts using extracted products
[Sat Mar 31 11:26:30 2012] Error reading totcts from fullrun_mos1_xmm0412591401_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sat Mar 31 11:26:39 2012] Calculating source flux in energy range 0.30-8.00
[Sat Mar 31 11:26:39 2012] Using photon index=1.80, rate=0.0263, arf fullrun_mos1_xmm0412591401_pi300-10000_pass1_cl_src3.arf
[Sat Mar 31 11:26:39 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Mar 31 11:26:39 2012] Updating source flux to 4.5e-13
[Sat Mar 31 11:27:11 2012] Flag b found in src. 3 procflags, skipping spectral fitting
[Sat Mar 31 11:27:11 2012] Flag c found in src. 3 procflags, skipping spectral fitting
[Sat Mar 31 11:37:36 2012] Reading fit data from xmm0412591401/analysis//spectral/fullrun_mos1_xmm0412591401_pi300-10000_pass1_cl_src3_pl.csv
[Sat Mar 31 11:37:36 2012] Spectral fit parameter nH value = 3.3137e+21
[Sat Mar 31 11:37:36 2012] Spectral fit parameter PhoIndex value = 2.67362
[Sat Mar 31 11:37:36 2012] Failed to get F(0.3-8.0) from xmm0412591401/analysis//spectral/fullrun_mos1_xmm0412591401_pi300-10000_pass1_cl_src3_pl.csv, possibly due to different flux energy range selected
[Sat Mar 31 11:37:36 2012] Calculating source flux in energy range 0.30-8.00
[Sat Mar 31 11:37:36 2012] Using Nh = 3.3e+21, photon index=2.67, rate=0.0263, arf fullrun_mos1_xmm0412591401_pi300-10000_pass1_cl_src3.arf
[Sat Mar 31 11:37:36 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Mar 31 11:37:36 2012] Updating source flux to 3.8e-13