[Wed Mar 28 00:29:45 2012] Detection parameters:
  Position = (287.1, 395.6) = 5 34 40.17 22 6 33.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 688.3 +/- 38.5
  Background counts = 430.1
  Rate = 0.06 +/- 0.003

[Wed Mar 28 00:29:50 2012] Off-axis axis estimate = 7.09'
[Wed Mar 28 00:39:22 2012] Using EEF radius (= 9.98 ")to estimate initial spatial extent for simple fitting
[Wed Mar 28 00:39:22 2012] Initial guess for spatial extent in simple fitting = 9.98"
[Wed Mar 28 00:39:22 2012] source mask rpix=2.3, npix_max = 31, mask sum = 22, frac = 0.705
[Wed Mar 28 00:39:22 2012] Giving source the simple spatial ID 20 for pass 0, mean size = 9.98"
[Wed Mar 28 10:34:47 2012] fullrun_mos1_xmm0412591401_pi300-10000_cl_pass0_src20.ximg exists
[Wed Mar 28 10:34:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591401_pi300-10000_cl_pass0_src20.csv
[Wed Mar 28 10:34:47 2012] fullrun_mos1_xmm0412591401_pi300-10000_cl_pass0_src20_1.ximg exists
[Wed Mar 28 10:34:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591401_pi300-10000_cl_pass0_src20.csv
[Wed Mar 28 10:34:47 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412591401_pi300-10000_cl_pass0_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412591401_pi300-10000_cl_pass0_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 28 10:34:51 2012] fullrun_mos1_xmm0412591401_pi300-10000_cl_pass0_tfrozen_src20.ximg exists
[Wed Mar 28 10:34:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591401_pi300-10000_cl_pass0_tfrozen_src20.csv
[Wed Mar 28 10:34:51 2012] fullrun_mos1_xmm0412591401_pi300-10000_cl_pass0_tfrozen_src20_1.ximg exists
[Wed Mar 28 10:34:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591401_pi300-10000_cl_pass0_tfrozen_src20.csv
[Wed Mar 28 10:34:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412591401_pi300-10000_cl_pass0_tfrozen_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412591401_pi300-10000_cl_pass0_tfrozen_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 29 00:24:53 2012] Warning, spatial fit 20 centroid is now closest to src. 33
[Thu Mar 29 00:24:54 2012] Vigneting correction estimate = 1.000000
[Thu Mar 29 00:24:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar 29 00:24:54 2012] Assessing source extent using major
[Thu Mar 29 00:24:54 2012] Source does appear to be extended
[Thu Mar 29 00:24:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar 29 00:24:54 2012] Source is confused with source 33
[Thu Mar 29 00:24:54 2012] Source is confused with source 45
[Thu Mar 29 00:24:54 2012] Source is confused with source 96
[Thu Mar 29 00:26:12 2012] Using EEF radius (= 9.98 ")to estimate initial spatial extent for simple fitting
[Thu Mar 29 00:26:12 2012] Initial guess for spatial extent in simple fitting = 9.98"
[Thu Mar 29 00:26:12 2012] source mask rpix=2.3, npix_max = 31, mask sum = 22, frac = 0.705
[Thu Mar 29 00:26:12 2012] Giving source the simple spatial ID 20 for pass 1, mean size = 9.98"
[Thu Mar 29 11:04:46 2012] fullrun_mos1_xmm0412591401_pi300-10000_cl_pass1_src20.ximg exists
[Thu Mar 29 11:04:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591401_pi300-10000_cl_pass1_src20.csv
[Thu Mar 29 11:04:46 2012] fullrun_mos1_xmm0412591401_pi300-10000_cl_pass1_src20_1.ximg exists
[Thu Mar 29 11:04:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591401_pi300-10000_cl_pass1_src20.csv
[Thu Mar 29 11:04:46 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412591401_pi300-10000_cl_pass1_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412591401_pi300-10000_cl_pass1_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 29 11:04:50 2012] fullrun_mos1_xmm0412591401_pi300-10000_cl_pass1_tfrozen_src20.ximg exists
[Thu Mar 29 11:04:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591401_pi300-10000_cl_pass1_tfrozen_src20.csv
[Thu Mar 29 11:04:50 2012] fullrun_mos1_xmm0412591401_pi300-10000_cl_pass1_tfrozen_src20_1.ximg exists
[Thu Mar 29 11:04:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591401_pi300-10000_cl_pass1_tfrozen_src20.csv
[Thu Mar 29 11:04:50 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412591401_pi300-10000_cl_pass1_tfrozen_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412591401_pi300-10000_cl_pass1_tfrozen_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 30 21:00:59 2012] Warning, spatial fit 20 centroid is now closest to src. 96
[Fri Mar 30 21:00:59 2012] Source 27 is offset by -2.147576 and 3.562946 pixels which is larger than
2 X fitted extent = 1.161536 x 1.161536, not incorporating fit results
[Fri Mar 30 21:01:00 2012] Vigneting correction estimate = 1.000000
[Fri Mar 30 21:01:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 30 21:01:00 2012] Assessing source extent using major
[Fri Mar 30 21:01:00 2012] Source does appear to be extended
[Fri Mar 30 21:01:00 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar 30 21:02:38 2012] XMMSAS src. selection expression = ellipse(24925.310913, 34369.826263, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Mar 30 21:02:38 2012] Writing source region out to fullrun_mos1_xmm0412591401_pi300-10000_pass1_cl_src27_src.reg
[Fri Mar 30 21:02:38 2012] Extracting stamp from image fullrun_mos1_xmm0412591401_pi300-10000_cl_sm2.00.img.gz, (250, 358) - (325, 433)
[Fri Mar 30 21:02:38 2012] XMMSAS bgd. selection expression = annulus(24925.310913, 34369.826263, 1087.500000, 2175.000000, X, Y) && !ellipse(27666.990600, 35274.359800, 1341.008039, 1341.008039, 0.000000, X, Y) && !ellipse(23136.084015, 34438.416290, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25903.938782, 34307.449005, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27548.979004, 34265.443787, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28468.238000, 34025.380000, 1631.832047, 1631.832047, 0.000000, X, Y) && !ellipse(24333.005737, 34438.307434, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27866.071200, 36028.628200, 1697.768049, 1697.768049, 0.000000, X, Y) && !ellipse(24851.891388, 34923.930878, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27784.459600, 38702.626000, 2896.784083, 2896.784083, 0.000000, X, Y) && !ellipse(27864.765340, 36793.333400, 1381.712040, 1381.712040, 0.000000, X, Y) && !ellipse(23476.291504, 35775.268677, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24883.850000, 35480.212000, 204.073606, 204.073606, -0.000000, X, Y) && !ellipse(25578.620000, 35157.678000, 1087.016031, 1087.016031, 0.000000, X, Y) && !ellipse(24345.917145, 34838.770813, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23601.269043, 34833.734222, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25650.152000, 34676.810000, 1412.464041, 1412.464041, 0.000000, X, Y) && !ellipse(22802.808807, 34519.747803, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23987.394000, 34531.286000, 1632.592047, 1632.592047, 0.000000, X, Y)
[Fri Mar 30 21:02:38 2012] Writing fullrun_mos1_xmm0412591401_pi300-10000_pass1_cl_src27.gif
[Fri Mar 30 21:53:22 2012] Mean detx,y = (7085.98, -2743.52) 
[Fri Mar 30 21:53:24 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Mar 30 21:53:52 2012] Binned source spectrum to 10 counts/bin
[Fri Mar 30 21:53:52 2012] Setting source spectrum file to fullrun_mos1_xmm0412591401_pi300-10000_pass1_cl_src27_src_b10.pi.gz
[Fri Mar 30 21:53:52 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0412591401_pi300-10000_pass1_cl_src27_bgd.pi.gz
[Sat Mar 31 00:34:36 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Mar 31 00:34:36 2012] rmf not generated due to insufficient counts
[Sat Mar 31 11:26:32 2012] Updating aperture counts using extracted products
[Sat Mar 31 11:26:32 2012] Error reading totcts from fullrun_mos1_xmm0412591401_pi300-10000_pass1_cl_src27_src_b10.pi.gz
[Sat Mar 31 11:26:41 2012] Calculating source flux in energy range 0.30-8.00
[Sat Mar 31 11:26:41 2012] Using photon index=1.80, rate=0.0592, arf fullrun_mos1_xmm0412591401_pi300-10000_pass1_cl_src27.arf
[Sat Mar 31 11:26:41 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Mar 31 11:26:41 2012] Updating source flux to 1.2e-12
[Sat Mar 31 11:27:12 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting