[Wed Mar 28 00:29:45 2012] Detection parameters:
  Position = (323.1, 461.0) = 5 34 28.87 22 11 21.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 631.8 +/- 40.9
  Background counts = 246.4
  Rate = 0.03 +/- 0.002

[Wed Mar 28 00:29:50 2012] Off-axis axis estimate = 11.92'
[Wed Mar 28 00:39:22 2012] Using EEF radius (= 12.39 ")to estimate initial spatial extent for simple fitting
[Wed Mar 28 00:39:22 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Mar 28 00:39:22 2012] Initial guess for spatial extent in simple fitting = 12.39"
[Wed Mar 28 00:39:22 2012] source mask rpix=2.8, npix_max = 44, mask sum = 36, frac = 0.803
[Wed Mar 28 00:39:22 2012] Giving source the simple spatial ID 19 for pass 0, mean size = 12.39"
[Wed Mar 28 10:34:46 2012] fullrun_mos1_xmm0412591401_pi300-10000_cl_pass0_src19.ximg exists
[Wed Mar 28 10:34:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591401_pi300-10000_cl_pass0_src19.csv
[Wed Mar 28 10:34:46 2012] fullrun_mos1_xmm0412591401_pi300-10000_cl_pass0_src19_1.ximg exists
[Wed Mar 28 10:34:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591401_pi300-10000_cl_pass0_src19.csv
[Wed Mar 28 10:34:47 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412591401_pi300-10000_cl_pass0_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412591401_pi300-10000_cl_pass0_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 28 10:34:50 2012] fullrun_mos1_xmm0412591401_pi300-10000_cl_pass0_tfrozen_src19.ximg exists
[Wed Mar 28 10:34:50 2012] fullrun_mos1_xmm0412591401_pi300-10000_cl_pass0_tfrozen_src19_1.ximg exists
[Wed Mar 28 10:34:51 2012] Fit fullrun_mos1_xmm0412591401_pi300-10000_cl_pass0_tfrozen_src19 appears to have run properly
[Thu Mar 29 00:24:53 2012] Warning, spatial fit 19 centroid is now closest to src. 60
[Thu Mar 29 00:24:53 2012] Source 26 is offset by -2.382646 and 1.790935 pixels which is larger than
2 X fitted extent = 1.564124 x 1.564124, not incorporating fit results
[Thu Mar 29 00:24:53 2012] Spatial fit model total counts = 11116.600000, observed total counts = 7121.000000
[Thu Mar 29 00:24:53 2012] Poor agreement between spatial fit and data for source 26
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Mar 29 00:24:54 2012] Vigneting correction estimate = 1.000000
[Thu Mar 29 00:24:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar 29 00:24:54 2012] Assessing source extent using major
[Thu Mar 29 00:24:54 2012] Source does appear to be extended
[Thu Mar 29 00:24:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar 29 00:24:54 2012] Source is confused with source 32
[Thu Mar 29 00:26:12 2012] Using EEF radius (= 12.39 ")to estimate initial spatial extent for simple fitting
[Thu Mar 29 00:26:12 2012] Initial guess for spatial extent in simple fitting = 12.39"
[Thu Mar 29 00:26:12 2012] source mask rpix=2.8, npix_max = 44, mask sum = 36, frac = 0.803
[Thu Mar 29 00:26:12 2012] Giving source the simple spatial ID 19 for pass 1, mean size = 12.39"
[Thu Mar 29 11:04:46 2012] fullrun_mos1_xmm0412591401_pi300-10000_cl_pass1_src19.ximg exists
[Thu Mar 29 11:04:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591401_pi300-10000_cl_pass1_src19.csv
[Thu Mar 29 11:04:46 2012] fullrun_mos1_xmm0412591401_pi300-10000_cl_pass1_src19_1.ximg exists
[Thu Mar 29 11:04:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591401_pi300-10000_cl_pass1_src19.csv
[Thu Mar 29 11:04:46 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412591401_pi300-10000_cl_pass1_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412591401_pi300-10000_cl_pass1_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 29 11:04:50 2012] fullrun_mos1_xmm0412591401_pi300-10000_cl_pass1_tfrozen_src19.ximg exists
[Thu Mar 29 11:04:50 2012] fullrun_mos1_xmm0412591401_pi300-10000_cl_pass1_tfrozen_src19_1.ximg exists
[Thu Mar 29 11:04:50 2012] Fit fullrun_mos1_xmm0412591401_pi300-10000_cl_pass1_tfrozen_src19 appears to have run properly
[Fri Mar 30 21:00:59 2012] Warning, spatial fit 19 centroid is now closest to src. 42
[Fri Mar 30 21:00:59 2012] Source 26 is offset by -8.382186 and -0.522537 pixels which is larger than
2 X fitted extent = 1.377605 x 1.377605, not incorporating fit results
[Fri Mar 30 21:00:59 2012] Warning: source 39 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 26 at 12.548112 pixels away
[Fri Mar 30 21:01:00 2012] Vigneting correction estimate = 1.000000
[Fri Mar 30 21:01:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 30 21:01:00 2012] Assessing source extent using major
[Fri Mar 30 21:01:00 2012] Source does appear to be extended
[Fri Mar 30 21:01:00 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar 30 21:02:37 2012] XMMSAS src. selection expression = ellipse(28064.561798, 40058.351318, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Mar 30 21:02:37 2012] Writing source region out to fullrun_mos1_xmm0412591401_pi300-10000_pass1_cl_src26_src.reg
[Fri Mar 30 21:02:37 2012] Extracting stamp from image fullrun_mos1_xmm0412591401_pi300-10000_cl_sm2.00.img.gz, (286, 423) - (361, 498)
[Fri Mar 30 21:02:38 2012] XMMSAS bgd. selection expression = annulus(28064.561798, 40058.351318, 1087.500000, 2175.000000, X, Y) && !ellipse(27792.296000, 40474.758000, 2022.256058, 2022.256058, 0.000000, X, Y) && !ellipse(28395.909454, 41699.831146, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28242.062660, 38696.928000, 1843.344053, 1843.344053, 0.000000, X, Y) && !ellipse(27662.834000, 38105.250000, 1544.568044, 1544.568044, 0.000000, X, Y) && !ellipse(27784.459600, 38702.626000, 2896.784083, 2896.784083, 0.000000, X, Y) && !ellipse(28235.086365, 43097.658936, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27369.177765, 40749.683777, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28305.614563, 37969.945099, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27259.559570, 37622.115021, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28355.651245, 37195.831482, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27864.765340, 36793.333400, 1381.712040, 1381.712040, 0.000000, X, Y)
[Fri Mar 30 21:02:38 2012] Writing fullrun_mos1_xmm0412591401_pi300-10000_pass1_cl_src26.gif
[Fri Mar 30 21:52:49 2012] Mean detx,y = (12812.77, 46.98) 
[Fri Mar 30 21:52:51 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Mar 30 21:53:05 2012] Binned source spectrum to 10 counts/bin
[Fri Mar 30 21:53:05 2012] Setting source spectrum file to fullrun_mos1_xmm0412591401_pi300-10000_pass1_cl_src26_src_b10.pi.gz
[Fri Mar 30 21:53:05 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0412591401_pi300-10000_pass1_cl_src26_bgd.pi.gz
[Sat Mar 31 00:34:25 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Mar 31 00:34:25 2012] rmf not generated due to insufficient counts
[Sat Mar 31 11:26:32 2012] Updating aperture counts using extracted products
[Sat Mar 31 11:26:32 2012] Error reading totcts from fullrun_mos1_xmm0412591401_pi300-10000_pass1_cl_src26_src_b10.pi.gz
[Sat Mar 31 11:26:41 2012] Calculating source flux in energy range 0.30-8.00
[Sat Mar 31 11:26:41 2012] Using photon index=1.80, rate=0.0289, arf fullrun_mos1_xmm0412591401_pi300-10000_pass1_cl_src26.arf
[Sat Mar 31 11:26:41 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Mar 31 11:26:41 2012] Updating source flux to 6.9e-13
[Sat Mar 31 11:27:12 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting