[Wed Mar 28 00:29:45 2012] Detection parameters:
  Position = (391.9, 319.9) = 5 34 7.37 22 1 6.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 951.6 +/- 47.3
  Background counts = 722.4
  Rate = 0.06 +/- 0.003

[Wed Mar 28 00:29:50 2012] Off-axis axis estimate = 6.95'
[Wed Mar 28 00:39:22 2012] Using EEF radius (= 9.91 ")to estimate initial spatial extent for simple fitting
[Wed Mar 28 00:39:22 2012] Initial guess for spatial extent in simple fitting = 9.91"
[Wed Mar 28 00:39:22 2012] source mask rpix=2.3, npix_max = 30, mask sum = 19, frac = 0.616
[Wed Mar 28 00:39:22 2012] Giving source the simple spatial ID 17 for pass 0, mean size = 9.91"
[Wed Mar 28 10:34:46 2012] fullrun_mos1_xmm0412591401_pi300-10000_cl_pass0_src17.ximg exists
[Wed Mar 28 10:34:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591401_pi300-10000_cl_pass0_src17.csv
[Wed Mar 28 10:34:46 2012] fullrun_mos1_xmm0412591401_pi300-10000_cl_pass0_src17_1.ximg exists
[Wed Mar 28 10:34:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591401_pi300-10000_cl_pass0_src17.csv
[Wed Mar 28 10:34:46 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412591401_pi300-10000_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412591401_pi300-10000_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 28 10:34:50 2012] fullrun_mos1_xmm0412591401_pi300-10000_cl_pass0_tfrozen_src17.ximg exists
[Wed Mar 28 10:34:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591401_pi300-10000_cl_pass0_tfrozen_src17.csv
[Wed Mar 28 10:34:50 2012] fullrun_mos1_xmm0412591401_pi300-10000_cl_pass0_tfrozen_src17_1.ximg exists
[Wed Mar 28 10:34:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591401_pi300-10000_cl_pass0_tfrozen_src17.csv
[Wed Mar 28 10:34:50 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412591401_pi300-10000_cl_pass0_tfrozen_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412591401_pi300-10000_cl_pass0_tfrozen_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 29 00:24:53 2012] Warning, spatial fit 17 centroid is now closest to src. 30
[Thu Mar 29 00:24:54 2012] Vigneting correction estimate = 1.000000
[Thu Mar 29 00:24:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar 29 00:24:54 2012] Assessing source extent using major
[Thu Mar 29 00:24:54 2012] Source does appear to be extended
[Thu Mar 29 00:24:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar 29 00:26:12 2012] Using EEF radius (= 9.91 ")to estimate initial spatial extent for simple fitting
[Thu Mar 29 00:26:12 2012] Initial guess for spatial extent in simple fitting = 9.91"
[Thu Mar 29 00:26:12 2012] source mask rpix=2.3, npix_max = 30, mask sum = 19, frac = 0.616
[Thu Mar 29 00:26:12 2012] Giving source the simple spatial ID 17 for pass 1, mean size = 9.91"
[Thu Mar 29 11:04:46 2012] fullrun_mos1_xmm0412591401_pi300-10000_cl_pass1_src17.ximg exists
[Thu Mar 29 11:04:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591401_pi300-10000_cl_pass1_src17.csv
[Thu Mar 29 11:04:46 2012] fullrun_mos1_xmm0412591401_pi300-10000_cl_pass1_src17_1.ximg exists
[Thu Mar 29 11:04:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591401_pi300-10000_cl_pass1_src17.csv
[Thu Mar 29 11:04:46 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412591401_pi300-10000_cl_pass1_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412591401_pi300-10000_cl_pass1_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 29 11:04:50 2012] fullrun_mos1_xmm0412591401_pi300-10000_cl_pass1_tfrozen_src17.ximg exists
[Thu Mar 29 11:04:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591401_pi300-10000_cl_pass1_tfrozen_src17.csv
[Thu Mar 29 11:04:50 2012] fullrun_mos1_xmm0412591401_pi300-10000_cl_pass1_tfrozen_src17_1.ximg exists
[Thu Mar 29 11:04:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591401_pi300-10000_cl_pass1_tfrozen_src17.csv
[Thu Mar 29 11:04:50 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412591401_pi300-10000_cl_pass1_tfrozen_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412591401_pi300-10000_cl_pass1_tfrozen_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 30 21:00:59 2012] Warning: source 17 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 24 at 12.388499 pixels away
[Fri Mar 30 21:00:59 2012] Source 24 is offset by 8.132001 and 0.090200 pixels which is larger than
2 X fitted extent = 1.151600 x 1.151600, not incorporating fit results
[Fri Mar 30 21:01:00 2012] Vigneting correction estimate = 1.000000
[Fri Mar 30 21:01:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 30 21:01:00 2012] Assessing source extent using major
[Fri Mar 30 21:01:00 2012] Source does appear to be extended
[Fri Mar 30 21:01:00 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar 30 21:02:37 2012] XMMSAS src. selection expression = ellipse(34048.480103, 27780.845367, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Mar 30 21:02:37 2012] Writing source region out to fullrun_mos1_xmm0412591401_pi300-10000_pass1_cl_src24_src.reg
[Fri Mar 30 21:02:37 2012] Extracting stamp from image fullrun_mos1_xmm0412591401_pi300-10000_cl_sm2.00.img.gz, (354, 282) - (429, 357)
[Fri Mar 30 21:02:37 2012] XMMSAS bgd. selection expression = annulus(34048.480103, 27780.845367, 1087.500000, 2175.000000, X, Y) && !ellipse(35670.298000, 26570.053000, 772.908022, 772.908022, 0.000000, X, Y) && !ellipse(35708.266000, 27599.104000, 1462.336042, 1462.336042, 0.000000, X, Y) && !ellipse(34740.934000, 26651.992000, 998.000029, 998.000029, 0.000000, X, Y) && !ellipse(34273.026000, 26451.744000, 1631.408047, 1631.408047, 0.000000, X, Y) && !ellipse(34355.093506, 25788.041443, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34131.024963, 25353.357391, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34787.605743, 25812.627014, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34093.936859, 29090.550079, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34136.812927, 28496.213806, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34875.123474, 25091.975067, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35194.656250, 28392.250824, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34286.564545, 29614.143097, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34285.144104, 30222.370483, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35412.764252, 26231.133972, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34915.814453, 30576.373505, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36028.308000, 30201.654000, 1089.752031, 1089.752031, 0.000000, X, Y) && !ellipse(35500.956000, 29795.210000, 838.432024, 838.432024, 0.000000, X, Y) && !ellipse(35148.904785, 26782.418945, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36134.533966, 26074.997009, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36684.430359, 25239.533630, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35652.698000, 24792.186000, 986.112028, 986.112028, 0.000000, X, Y) && !ellipse(35230.592072, 25078.222015, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Mar 30 21:02:37 2012] Writing fullrun_mos1_xmm0412591401_pi300-10000_pass1_cl_src24.gif
[Fri Mar 30 21:51:32 2012] Mean detx,y = (885.25, 6844.61) 
[Fri Mar 30 21:51:34 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Mar 30 21:51:56 2012] Binned source spectrum to 10 counts/bin
[Fri Mar 30 21:51:57 2012] Setting source spectrum file to fullrun_mos1_xmm0412591401_pi300-10000_pass1_cl_src24_src_b10.pi.gz
[Fri Mar 30 21:51:57 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0412591401_pi300-10000_pass1_cl_src24_bgd.pi.gz
[Sat Mar 31 00:33:47 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Mar 31 00:33:47 2012] rmf not generated due to insufficient counts
[Sat Mar 31 11:26:31 2012] Updating aperture counts using extracted products
[Sat Mar 31 11:26:31 2012] Error reading totcts from fullrun_mos1_xmm0412591401_pi300-10000_pass1_cl_src24_src_b10.pi.gz
[Sat Mar 31 11:26:40 2012] Calculating source flux in energy range 0.30-8.00
[Sat Mar 31 11:26:40 2012] Using photon index=1.80, rate=0.0632, arf fullrun_mos1_xmm0412591401_pi300-10000_pass1_cl_src24.arf
[Sat Mar 31 11:26:40 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Mar 31 11:26:40 2012] Updating source flux to 1e-12
[Sat Mar 31 11:27:12 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting