[Wed Mar 28 00:29:45 2012] Detection parameters:
  Position = (339.4, 407.8) = 5 34 23.79 22 7 29.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1899.7 +/- 339.0
  Background counts = 607.2
  Rate = 0.2 +/- 0.03

[Wed Mar 28 00:29:50 2012] Off-axis axis estimate = 8.47'
[Wed Mar 28 00:39:22 2012] Using EEF radius (= 10.66 ")to estimate initial spatial extent for simple fitting
[Wed Mar 28 00:39:22 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Mar 28 00:39:22 2012] Initial guess for spatial extent in simple fitting = 10.66"
[Wed Mar 28 00:39:22 2012] source mask rpix=2.5, npix_max = 34, mask sum = 27, frac = 0.775
[Wed Mar 28 00:39:22 2012] Giving source the simple spatial ID 16 for pass 0, mean size = 10.66"
[Wed Mar 28 10:34:46 2012] fullrun_mos1_xmm0412591401_pi300-10000_cl_pass0_src16.ximg exists
[Wed Mar 28 10:34:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591401_pi300-10000_cl_pass0_src16.csv
[Wed Mar 28 10:34:46 2012] fullrun_mos1_xmm0412591401_pi300-10000_cl_pass0_src16_1.ximg exists
[Wed Mar 28 10:34:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591401_pi300-10000_cl_pass0_src16.csv
[Wed Mar 28 10:34:46 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412591401_pi300-10000_cl_pass0_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412591401_pi300-10000_cl_pass0_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 28 10:34:50 2012] fullrun_mos1_xmm0412591401_pi300-10000_cl_pass0_tfrozen_src16.ximg exists
[Wed Mar 28 10:34:50 2012] fullrun_mos1_xmm0412591401_pi300-10000_cl_pass0_tfrozen_src16_1.ximg exists
[Wed Mar 28 10:34:50 2012] Fit fullrun_mos1_xmm0412591401_pi300-10000_cl_pass0_tfrozen_src16 appears to have run properly
[Thu Mar 29 00:24:53 2012] Warning, spatial fit 16 centroid is now closest to src. 77
[Thu Mar 29 00:24:54 2012] Source 23 is offset by 0.776382 and 3.866059 pixels which is larger than
2 X fitted extent = 1.224635 x 1.224635, not incorporating fit results
[Thu Mar 29 00:24:54 2012] Vigneting correction estimate = 1.000000
[Thu Mar 29 00:24:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar 29 00:24:54 2012] Assessing source extent using major
[Thu Mar 29 00:24:54 2012] Source does appear to be extended
[Thu Mar 29 00:24:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar 29 00:24:54 2012] Source is confused with source 83
[Thu Mar 29 00:26:12 2012] Using EEF radius (= 10.66 ")to estimate initial spatial extent for simple fitting
[Thu Mar 29 00:26:12 2012] Initial guess for spatial extent in simple fitting = 10.66"
[Thu Mar 29 00:26:12 2012] source mask rpix=2.5, npix_max = 34, mask sum = 27, frac = 0.775
[Thu Mar 29 00:26:12 2012] Giving source the simple spatial ID 16 for pass 1, mean size = 10.66"
[Thu Mar 29 11:04:45 2012] fullrun_mos1_xmm0412591401_pi300-10000_cl_pass1_src16.ximg exists
[Thu Mar 29 11:04:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591401_pi300-10000_cl_pass1_src16.csv
[Thu Mar 29 11:04:46 2012] fullrun_mos1_xmm0412591401_pi300-10000_cl_pass1_src16_1.ximg exists
[Thu Mar 29 11:04:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591401_pi300-10000_cl_pass1_src16.csv
[Thu Mar 29 11:04:46 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412591401_pi300-10000_cl_pass1_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412591401_pi300-10000_cl_pass1_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 29 11:04:50 2012] fullrun_mos1_xmm0412591401_pi300-10000_cl_pass1_tfrozen_src16.ximg exists
[Thu Mar 29 11:04:50 2012] fullrun_mos1_xmm0412591401_pi300-10000_cl_pass1_tfrozen_src16_1.ximg exists
[Thu Mar 29 11:04:50 2012] Fit fullrun_mos1_xmm0412591401_pi300-10000_cl_pass1_tfrozen_src16 appears to have run properly
[Fri Mar 30 21:00:59 2012] Warning, spatial fit 16 centroid is now closest to src. 77
[Fri Mar 30 21:01:00 2012] Vigneting correction estimate = 1.000000
[Fri Mar 30 21:01:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 30 21:01:00 2012] Assessing source extent using major
[Fri Mar 30 21:01:00 2012] Source does appear to be extended
[Fri Mar 30 21:01:00 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar 30 21:02:37 2012] Counts = 1899.726074, rescaling region sizes by 2.000000
[Fri Mar 30 21:02:37 2012] XMMSAS src. selection expression = ellipse(29478.131256, 35432.695557, 1305.000000, 1305.000000, 0.000000, X, Y)
[Fri Mar 30 21:02:37 2012] Writing source region out to fullrun_mos1_xmm0412591401_pi300-10000_pass1_cl_src23_src.reg
[Fri Mar 30 21:02:37 2012] Extracting stamp from image fullrun_mos1_xmm0412591401_pi300-10000_cl_sm2.00.img.gz, (264, 333) - (414, 483)
[Fri Mar 30 21:02:37 2012] XMMSAS bgd. selection expression = annulus(29478.131256, 35432.695557, 4350.000000, 8700.000000, X, Y) && !ellipse(20613.998672, 25879.910767, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20696.340424, 31102.825989, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35670.298000, 26570.053000, 772.908022, 772.908022, 0.000000, X, Y) && !ellipse(20699.600800, 31455.992676, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27666.990600, 35274.359800, 1341.008039, 1341.008039, 0.000000, X, Y) && !ellipse(29582.219025, 34487.215729, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29025.095642, 34413.281128, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23136.084015, 34438.416290, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25903.938782, 34307.449005, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27548.979004, 34265.443787, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28468.238000, 34025.380000, 1631.832047, 1631.832047, 0.000000, X, Y) && !ellipse(29986.659637, 34104.995056, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20177.845062, 27436.304871, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35708.266000, 27599.104000, 1462.336042, 1462.336042, 0.000000, X, Y) && !ellipse(34740.934000, 26651.992000, 998.000029, 998.000029, 0.000000, X, Y) && !ellipse(20522.122711, 26739.253479, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34273.026000, 26451.744000, 1631.408047, 1631.408047, 0.000000, X, Y) && !ellipse(34048.480103, 27780.845367, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28064.561798, 40058.351318, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24925.310913, 34369.826263, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20692.485321, 33291.249817, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34093.936859, 29090.550079, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34136.812927, 28496.213806, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27792.296000, 40474.758000, 2022.256058, 2022.256058, 0.000000, X, Y) && !ellipse(24333.005737, 34438.307434, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34242.857452, 31083.765533, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35194.656250, 28392.250824, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28395.909454, 41699.831146, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28242.062660, 38696.928000, 1843.344053, 1843.344053, 0.000000, X, Y) && !ellipse(27662.834000, 38105.250000, 1544.568044, 1544.568044, 0.000000, X, Y) && !ellipse(27866.071200, 36028.628200, 1697.768049, 1697.768049, 0.000000, X, Y) && !ellipse(24851.891388, 34923.930878, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35314.634369, 32400.208710, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34286.564545, 29614.143097, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27784.459600, 38702.626000, 2896.784083, 2896.784083, 0.000000, X, Y) && !ellipse(31966.801727, 34009.573303, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34285.144104, 30222.370483, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35412.764252, 26231.133972, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28235.086365, 43097.658936, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27369.177765, 40749.683777, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28305.614563, 37969.945099, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27259.559570, 37622.115021, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28355.651245, 37195.831482, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27864.765340, 36793.333400, 1381.712040, 1381.712040, 0.000000, X, Y) && !ellipse(28245.223267, 36487.594452, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32642.512000, 36483.938000, 2301.696066, 2301.696066, 0.000000, X, Y) && !ellipse(23476.291504, 35775.268677, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32505.716919, 35606.764587, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36043.564000, 35945.236000, 1938.904056, 1938.904056, 0.000000, X, Y) && !ellipse(31838.170000, 35439.384000, 1723.496050, 1723.496050, 0.000000, X, Y) && !ellipse(35139.973267, 35450.351501, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33719.960052, 35645.692627, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30297.376000, 35673.288200, 1371.584039, 1371.584039, 0.000000, X, Y) && !ellipse(24883.850000, 35480.212000, 204.073606, 204.073606, -0.000000, X, Y) && !ellipse(33481.185303, 35348.334656, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28221.484000, 34683.762000, 1075.368031, 1075.368031, 0.000000, X, Y) && !ellipse(25578.620000, 35157.678000, 1087.016031, 1087.016031, 0.000000, X, Y) && !ellipse(30098.756000, 35513.850000, 1077.880031, 1077.880031, 0.000000, X, Y) && !ellipse(34515.181152, 35112.528229, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33711.179871, 34871.446259, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21605.134384, 35093.481049, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30804.268000, 35003.224000, 1414.624041, 435.500013, 97.094480, X, Y) && !ellipse(24345.917145, 34838.770813, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32797.018768, 34830.696869, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23601.269043, 34833.734222, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31606.376190, 34562.432709, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20962.001328, 34828.941895, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25650.152000, 34676.810000, 1412.464041, 1412.464041, 0.000000, X, Y) && !ellipse(34534.000000, 34479.802887, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22802.808807, 34519.747803, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21761.921829, 34529.048370, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33284.752960, 34399.554626, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23987.394000, 34531.286000, 1632.592047, 1632.592047, 0.000000, X, Y) && !ellipse(35455.889893, 34073.270111, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34273.846954, 34096.074158, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32531.125549, 34008.410400, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33604.978699, 34239.461670, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33316.761993, 34017.955231, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34597.606537, 33534.716003, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35437.851624, 33204.175476, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34479.194885, 32985.318756, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35878.867920, 32653.134766, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34419.653198, 32483.289886, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35891.123535, 32144.139099, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34441.039459, 31963.459045, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34877.112091, 31614.479340, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34915.814453, 30576.373505, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20526.998672, 30495.310150, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36028.308000, 30201.654000, 1089.752031, 1089.752031, 0.000000, X, Y) && !ellipse(20442.036407, 29720.928375, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35500.956000, 29795.210000, 838.432024, 838.432024, 0.000000, X, Y) && !ellipse(20439.564575, 28926.081635, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20344.977829, 28319.978271, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35148.904785, 26782.418945, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36134.533966, 26074.997009, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30847.294200, 35470.608000, 1850.128053, 1850.128053, 0.000000, X, Y) && !ellipse(28047.808563, 43801.435516, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Mar 30 21:02:37 2012] Writing fullrun_mos1_xmm0412591401_pi300-10000_pass1_cl_src23.gif
[Fri Mar 30 21:49:46 2012] Mean detx,y = (8152.16, 1664.28) 
[Fri Mar 30 21:49:51 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Mar 30 21:51:14 2012] Binned source spectrum to 10 counts/bin
[Fri Mar 30 21:51:14 2012] Setting source spectrum file to fullrun_mos1_xmm0412591401_pi300-10000_pass1_cl_src23_src_b10.pi.gz
[Fri Mar 30 21:51:14 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0412591401_pi300-10000_pass1_cl_src23_bgd.pi.gz
[Sat Mar 31 00:33:27 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Mar 31 00:33:27 2012] rmf not generated due to insufficient counts
[Sat Mar 31 11:26:31 2012] Updating aperture counts using extracted products
[Sat Mar 31 11:26:31 2012] Error reading totcts from fullrun_mos1_xmm0412591401_pi300-10000_pass1_cl_src23_src_b10.pi.gz
[Sat Mar 31 11:26:40 2012] Calculating source flux in energy range 0.30-8.00
[Sat Mar 31 11:26:40 2012] Using photon index=1.80, rate=0.164, arf fullrun_mos1_xmm0412591401_pi300-10000_pass1_cl_src23.arf
[Sat Mar 31 11:26:40 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Mar 31 11:26:40 2012] Updating source flux to 2.7e-12
[Sat Mar 31 11:27:12 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting