[Wed Mar 28 00:29:45 2012] Detection parameters:
  Position = (403.6, 318.8) = 5 34 3.71 22 0 59.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1092.0 +/- 283.2
  Background counts = 744.1
  Rate = 0.05 +/- 0.01

[Wed Mar 28 00:29:50 2012] Off-axis axis estimate = 7.77'
[Wed Mar 28 00:39:22 2012] Using EEF radius (= 10.31 ")to estimate initial spatial extent for simple fitting
[Wed Mar 28 00:39:22 2012] Initial guess for spatial extent in simple fitting = 10.31"
[Wed Mar 28 00:39:22 2012] source mask rpix=2.4, npix_max = 32, mask sum = 13, frac = 0.394
[Wed Mar 28 00:39:22 2012] Skipping simple spatial due to low active detector fraction
[Thu Mar 29 00:24:53 2012] Spatial fit model total counts = 10725.800000, observed total counts = 9976.000000
[Thu Mar 29 00:24:53 2012] Offset between fit and detection position for source 14 = 7.464389 pixels
[Thu Mar 29 00:24:53 2012] Warning, changing simple spatial fit ID from -1 to 1
[Thu Mar 29 00:24:53 2012] 10690.817000 total counts/ 9828.550000 bgd. counts: snr = 8.697552
Spatial fit parameters:
  Offset between fit and detection position for source 14 = 7.464389 pixels
  Position = (411.0, 317.8) = 5 34 1.40 22 0 56.8
  Extent = 18.3 (14.0-21.3)", rotation angle = 0
  Source counts = 862.3 +/- 103.4
  Background counts = 9828.5
  Rate = 0.04 +/- 0.005
[Thu Mar 29 00:24:53 2012] Source 14 is offset by 3.354874 and 3.243471 pixels which is larger than
2 X fitted extent = 2.469076 x 2.469076, not incorporating fit results
[Thu Mar 29 00:24:54 2012] Vigneting correction estimate = 1.000000
[Thu Mar 29 00:24:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar 29 00:24:54 2012] Assessing source extent using major axis lower bound
[Thu Mar 29 00:24:54 2012] Source does appear to be extended
[Thu Mar 29 00:24:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar 29 00:24:54 2012] Source is confused with source 3
[Thu Mar 29 00:26:12 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Mar 29 00:26:12 2012] Initial guess for spatial extent in simple fitting = 18.28"
[Thu Mar 29 00:26:12 2012] source mask rpix=4.2, npix_max = 88, mask sum = 54, frac = 0.611
[Thu Mar 29 00:26:12 2012] Giving source the simple spatial ID 10 for pass 1, mean size = 18.28"
[Thu Mar 29 11:04:45 2012] fullrun_mos1_xmm0412591401_pi300-10000_cl_pass1_src10.ximg exists
[Thu Mar 29 11:04:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591401_pi300-10000_cl_pass1_src10.csv
[Thu Mar 29 11:04:45 2012] fullrun_mos1_xmm0412591401_pi300-10000_cl_pass1_src10_1.ximg exists
[Thu Mar 29 11:04:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591401_pi300-10000_cl_pass1_src10.csv
[Thu Mar 29 11:04:45 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412591401_pi300-10000_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412591401_pi300-10000_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 29 11:04:49 2012] fullrun_mos1_xmm0412591401_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Thu Mar 29 11:04:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591401_pi300-10000_cl_pass1_tfrozen_src10.csv
[Thu Mar 29 11:04:49 2012] fullrun_mos1_xmm0412591401_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Thu Mar 29 11:04:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591401_pi300-10000_cl_pass1_tfrozen_src10.csv
[Thu Mar 29 11:04:49 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412591401_pi300-10000_cl_pass1_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412591401_pi300-10000_cl_pass1_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 30 21:00:58 2012] Warning, spatial fit 10 centroid is now closest to src. 121
[Fri Mar 30 21:00:59 2012] Source 14 is offset by -3.593540 and -3.919931 pixels which is larger than
2 X fitted extent = 1.779223 x 1.779223, not incorporating fit results
[Fri Mar 30 21:01:00 2012] Vigneting correction estimate = 1.000000
[Fri Mar 30 21:01:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 30 21:01:00 2012] Assessing source extent using major axis lower bound
[Fri Mar 30 21:01:00 2012] Source does appear to be extended
[Fri Mar 30 21:01:00 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar 30 21:02:35 2012] XMMSAS src. selection expression = ellipse(35708.266000, 27599.104000, 1096.752032, 1096.752032, 0.000000, X, Y)
[Fri Mar 30 21:02:35 2012] Writing source region out to fullrun_mos1_xmm0412591401_pi300-10000_pass1_cl_src14_src.reg
[Fri Mar 30 21:02:35 2012] Extracting stamp from image fullrun_mos1_xmm0412591401_pi300-10000_cl_sm2.00.img.gz, (348, 255) - (474, 381)
[Fri Mar 30 21:02:36 2012] XMMSAS bgd. selection expression = annulus(35708.266000, 27599.104000, 1827.920053, 3655.840105, X, Y) && !ellipse(35670.298000, 26570.053000, 772.908022, 772.908022, 0.000000, X, Y) && !ellipse(34740.934000, 26651.992000, 998.000029, 998.000029, 0.000000, X, Y) && !ellipse(34273.026000, 26451.744000, 1631.408047, 1631.408047, 0.000000, X, Y) && !ellipse(34355.093506, 25788.041443, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34131.024963, 25353.357391, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34101.827606, 24659.659302, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34048.480103, 27780.845367, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34787.605743, 25812.627014, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34093.936859, 29090.550079, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34136.812927, 28496.213806, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34045.371063, 23776.673553, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34875.123474, 25091.975067, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34242.857452, 31083.765533, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35194.656250, 28392.250824, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34718.800659, 24471.053986, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34286.564545, 29614.143097, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33957.871918, 23191.242249, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34285.144104, 30222.370483, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35412.764252, 26231.133972, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34794.115875, 23370.366455, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34441.039459, 31963.459045, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34877.112091, 31614.479340, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34915.814453, 30576.373505, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36028.308000, 30201.654000, 1089.752031, 1089.752031, 0.000000, X, Y) && !ellipse(35500.956000, 29795.210000, 838.432024, 838.432024, 0.000000, X, Y) && !ellipse(35148.904785, 26782.418945, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36134.533966, 26074.997009, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36684.430359, 25239.533630, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35652.698000, 24792.186000, 986.112028, 986.112028, 0.000000, X, Y) && !ellipse(35230.592072, 25078.222015, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36598.702118, 24338.469788, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35088.776337, 24053.497528, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35904.624359, 24046.859955, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35573.660000, 23173.390000, 963.664028, 963.664028, 0.000000, X, Y)
[Fri Mar 30 21:02:36 2012] Writing fullrun_mos1_xmm0412591401_pi300-10000_pass1_cl_src14.gif
[Fri Mar 30 21:30:09 2012] Mean detx,y = (812.22, 8249.05) 
[Fri Mar 30 21:30:11 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Mar 30 21:31:11 2012] Binned source spectrum to 10 counts/bin
[Fri Mar 30 21:31:12 2012] Setting source spectrum file to fullrun_mos1_xmm0412591401_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Fri Mar 30 21:31:12 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0412591401_pi300-10000_pass1_cl_src14_bgd.pi.gz
[Sat Mar 31 11:26:31 2012] Updating aperture counts using extracted products
[Sat Mar 31 11:26:31 2012] Error reading totcts from fullrun_mos1_xmm0412591401_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Sat Mar 31 11:26:40 2012] Calculating source flux in energy range 0.30-8.00
[Sat Mar 31 11:26:40 2012] Using photon index=1.80, rate=0.0395, arf fullrun_mos1_xmm0412591401_pi300-10000_pass1_cl_src14.arf
[Sat Mar 31 11:26:40 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Mar 31 11:26:40 2012] Updating source flux to 6.6e-13
[Sat Mar 31 11:27:12 2012] Flag b found in src. 14 procflags, skipping spectral fitting
[Sat Mar 31 11:27:12 2012] Flag c found in src. 14 procflags, skipping spectral fitting