[Wed Mar 28 00:29:49 2012] Detection parameters:
  Position = (391.2, 235.9) = 5 34 7.62 21 54 58.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 234.8 +/- 31.8
  Background counts = 340.5
  Rate = 0.02 +/- 0.002

[Wed Mar 28 00:29:50 2012] Off-axis axis estimate = 8.11'
[Wed Mar 28 00:39:22 2012] Using EEF radius (= 10.48 ")to estimate initial spatial extent for simple fitting
[Wed Mar 28 00:39:22 2012] Initial guess for spatial extent in simple fitting = 10.48"
[Wed Mar 28 00:39:22 2012] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.063
[Wed Mar 28 00:39:22 2012] Giving source the simple spatial ID 114 for pass 0, mean size = 10.48"
[Thu Mar 29 00:24:54 2012] Vigneting correction estimate = 1.000000
[Thu Mar 29 00:24:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar 29 00:24:54 2012] Assessing source extent using major
[Thu Mar 29 00:24:54 2012] Source does appear to be extended
[Thu Mar 29 00:24:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar 29 00:24:54 2012] Source is confused with source 118
[Thu Mar 29 00:26:12 2012] Using EEF radius (= 10.48 ")to estimate initial spatial extent for simple fitting
[Thu Mar 29 00:26:12 2012] Initial guess for spatial extent in simple fitting = 10.48"
[Thu Mar 29 00:26:12 2012] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.063
[Thu Mar 29 00:26:12 2012] Giving source the simple spatial ID 100 for pass 1, mean size = 10.48"
[Thu Mar 29 11:04:49 2012] fullrun_mos1_xmm0412591401_pi300-10000_cl_pass1_src100.ximg exists
[Thu Mar 29 11:04:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591401_pi300-10000_cl_pass1_src100.csv
[Thu Mar 29 11:04:49 2012] fullrun_mos1_xmm0412591401_pi300-10000_cl_pass1_src100_1.ximg exists
[Thu Mar 29 11:04:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591401_pi300-10000_cl_pass1_src100.csv
[Thu Mar 29 11:04:49 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412591401_pi300-10000_cl_pass1_src100_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412591401_pi300-10000_cl_pass1_src100.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 29 11:04:58 2012] fullrun_mos1_xmm0412591401_pi300-10000_cl_pass1_tfrozen_src100.ximg exists
[Thu Mar 29 11:04:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591401_pi300-10000_cl_pass1_tfrozen_src100.csv
[Thu Mar 29 11:04:58 2012] fullrun_mos1_xmm0412591401_pi300-10000_cl_pass1_tfrozen_src100_1.ximg exists
[Thu Mar 29 11:04:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591401_pi300-10000_cl_pass1_tfrozen_src100.csv
[Thu Mar 29 11:04:58 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412591401_pi300-10000_cl_pass1_tfrozen_src100_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412591401_pi300-10000_cl_pass1_tfrozen_src100.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 30 21:00:59 2012] Spatial fit model total counts = 3981.500000, observed total counts = 3862.000000
[Fri Mar 30 21:00:59 2012] Offset between fit and detection position for source 127 = 0.933895 pixels
[Fri Mar 30 21:00:59 2012] Warning, changing simple spatial fit ID from 100 to 95
[Fri Mar 30 21:00:59 2012] 3505.124000 total counts/ 2901.690000 bgd. counts: snr = 11.202224
Spatial fit parameters:
  Offset between fit and detection position for source 127 = 0.933895 pixels
  Position = (391.0, 235.0) = 5 34 7.68 21 54 56.9
  Extent = 11.5 (9.2-18.2)", rotation angle = 0
  Source counts = 603.4 +/- 59.2
  Background counts = 2901.7
  Rate = 0.03 +/- 0.003
[Fri Mar 30 21:01:00 2012] Vigneting correction estimate = 1.000000
[Fri Mar 30 21:01:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 30 21:01:00 2012] Assessing source extent using major axis lower bound
[Fri Mar 30 21:01:00 2012] Source does appear to be extended
[Fri Mar 30 21:01:00 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar 30 21:02:48 2012] XMMSAS src. selection expression = ellipse(33968.692600, 20398.678000, 691.410020, 691.410020, 0.000000, X, Y)
[Fri Mar 30 21:02:48 2012] Writing source region out to fullrun_mos1_xmm0412591401_pi300-10000_pass1_cl_src127_src.reg
[Fri Mar 30 21:02:48 2012] Extracting stamp from image fullrun_mos1_xmm0412591401_pi300-10000_cl_sm2.00.img.gz, (351, 195) - (431, 275)
[Fri Mar 30 21:02:48 2012] XMMSAS bgd. selection expression = annulus(33968.692600, 20398.678000, 1152.350033, 2304.700066, X, Y) && !ellipse(33957.871918, 23191.242249, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34017.039246, 22658.199982, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34794.115875, 23370.366455, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33716.617371, 19152.046616, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34155.472473, 20042.673538, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35573.660000, 23173.390000, 963.664028, 963.664028, 0.000000, X, Y) && !ellipse(36174.080627, 22836.846283, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35268.328003, 22386.165680, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34595.344452, 22488.817078, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35772.340179, 21797.228409, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34763.694550, 21441.113312, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34316.438934, 21111.209991, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34456.260742, 20843.363998, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33834.290924, 21791.832062, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Mar 30 21:02:48 2012] Writing fullrun_mos1_xmm0412591401_pi300-10000_pass1_cl_src127.gif
[Fri Mar 30 23:25:08 2012] Mean detx,y = (-6500.64, 7045.62) 
[Fri Mar 30 23:25:10 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Mar 30 23:25:29 2012] Binned source spectrum to 10 counts/bin
[Fri Mar 30 23:25:29 2012] Setting source spectrum file to fullrun_mos1_xmm0412591401_pi300-10000_pass1_cl_src127_src_b10.pi.gz
[Fri Mar 30 23:25:29 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0412591401_pi300-10000_pass1_cl_src127_bgd.pi.gz
[Sat Mar 31 11:26:37 2012] Updating aperture counts using extracted products
[Sat Mar 31 11:26:37 2012] Error reading totcts from fullrun_mos1_xmm0412591401_pi300-10000_pass1_cl_src127_src_b10.pi.gz
[Sat Mar 31 11:26:46 2012] Calculating source flux in energy range 0.30-8.00
[Sat Mar 31 11:26:46 2012] Using photon index=1.80, rate=0.0276, arf fullrun_mos1_xmm0412591401_pi300-10000_pass1_cl_src127.arf
[Sat Mar 31 11:26:46 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Mar 31 11:26:46 2012] Updating source flux to 5.1e-13
[Sat Mar 31 11:27:12 2012] Flag c found in src. 127 procflags, skipping spectral fitting