[Wed Mar 28 00:29:45 2012] Detection parameters:
  Position = (345.2, 392.6) = 5 34 21.96 22 6 13.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 903.2 +/- 45.8
  Background counts = 695.8
  Rate = 0.07 +/- 0.004

[Wed Mar 28 00:29:50 2012] Off-axis axis estimate = 7.62'
[Wed Mar 28 00:39:22 2012] Using EEF radius (= 10.24 ")to estimate initial spatial extent for simple fitting
[Wed Mar 28 00:39:22 2012] Initial guess for spatial extent in simple fitting = 10.24"
[Wed Mar 28 00:39:22 2012] source mask rpix=2.4, npix_max = 32, mask sum = 25, frac = 0.767
[Wed Mar 28 00:39:22 2012] Giving source the simple spatial ID 9 for pass 0, mean size = 10.24"
[Wed Mar 28 10:34:46 2012] fullrun_mos1_xmm0412591401_pi300-10000_cl_pass0_src9.ximg exists
[Wed Mar 28 10:34:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591401_pi300-10000_cl_pass0_src9.csv
[Wed Mar 28 10:34:46 2012] fullrun_mos1_xmm0412591401_pi300-10000_cl_pass0_src9_1.ximg exists
[Wed Mar 28 10:34:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591401_pi300-10000_cl_pass0_src9.csv
[Wed Mar 28 10:34:46 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412591401_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412591401_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 28 10:34:50 2012] fullrun_mos1_xmm0412591401_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Wed Mar 28 10:34:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591401_pi300-10000_cl_pass0_tfrozen_src9.csv
[Wed Mar 28 10:34:50 2012] fullrun_mos1_xmm0412591401_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Wed Mar 28 10:34:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591401_pi300-10000_cl_pass0_tfrozen_src9.csv
[Wed Mar 28 10:34:50 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412591401_pi300-10000_cl_pass0_tfrozen_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412591401_pi300-10000_cl_pass0_tfrozen_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 29 00:24:53 2012] Spatial fit model total counts = 10395.600000, observed total counts = 8268.000000
[Thu Mar 29 00:24:53 2012] Poor agreement between spatial fit and data for source 12
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Mar 29 00:24:54 2012] Vigneting correction estimate = 1.000000
[Thu Mar 29 00:24:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar 29 00:24:54 2012] Assessing source extent using major
[Thu Mar 29 00:24:54 2012] Source does appear to be extended
[Thu Mar 29 00:24:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar 29 00:24:54 2012] Source is confused with source 6
[Thu Mar 29 00:26:12 2012] Using EEF radius (= 10.24 ")to estimate initial spatial extent for simple fitting
[Thu Mar 29 00:26:12 2012] Initial guess for spatial extent in simple fitting = 10.24"
[Thu Mar 29 00:26:12 2012] source mask rpix=2.4, npix_max = 32, mask sum = 25, frac = 0.767
[Thu Mar 29 00:26:12 2012] Giving source the simple spatial ID 8 for pass 1, mean size = 10.24"
[Thu Mar 29 11:04:45 2012] fullrun_mos1_xmm0412591401_pi300-10000_cl_pass1_src8.ximg exists
[Thu Mar 29 11:04:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591401_pi300-10000_cl_pass1_src8.csv
[Thu Mar 29 11:04:45 2012] fullrun_mos1_xmm0412591401_pi300-10000_cl_pass1_src8_1.ximg exists
[Thu Mar 29 11:04:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591401_pi300-10000_cl_pass1_src8.csv
[Thu Mar 29 11:04:45 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412591401_pi300-10000_cl_pass1_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412591401_pi300-10000_cl_pass1_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 29 11:04:49 2012] fullrun_mos1_xmm0412591401_pi300-10000_cl_pass1_tfrozen_src8.ximg exists
[Thu Mar 29 11:04:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591401_pi300-10000_cl_pass1_tfrozen_src8.csv
[Thu Mar 29 11:04:49 2012] fullrun_mos1_xmm0412591401_pi300-10000_cl_pass1_tfrozen_src8_1.ximg exists
[Thu Mar 29 11:04:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591401_pi300-10000_cl_pass1_tfrozen_src8.csv
[Thu Mar 29 11:04:49 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412591401_pi300-10000_cl_pass1_tfrozen_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412591401_pi300-10000_cl_pass1_tfrozen_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 30 21:00:58 2012] Source 12 is offset by 2.262731 and 4.732495 pixels which is larger than
2 X fitted extent = 1.172290 x 1.172290, not incorporating fit results
[Fri Mar 30 21:00:58 2012] Warning, spatial fit 8 centroid is now closest to src. 7
[Fri Mar 30 21:01:00 2012] Vigneting correction estimate = 1.000000
[Fri Mar 30 21:01:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 30 21:01:00 2012] Assessing source extent using major
[Fri Mar 30 21:01:00 2012] Source does appear to be extended
[Fri Mar 30 21:01:00 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar 30 21:02:35 2012] XMMSAS src. selection expression = ellipse(29986.659637, 34104.995056, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Mar 30 21:02:35 2012] Writing source region out to fullrun_mos1_xmm0412591401_pi300-10000_pass1_cl_src12_src.reg
[Fri Mar 30 21:02:35 2012] Extracting stamp from image fullrun_mos1_xmm0412591401_pi300-10000_cl_sm2.00.img.gz, (308, 355) - (383, 430)
[Fri Mar 30 21:02:35 2012] XMMSAS bgd. selection expression = annulus(29986.659637, 34104.995056, 1087.500000, 2175.000000, X, Y) && !ellipse(27666.990600, 35274.359800, 1341.008039, 1341.008039, 0.000000, X, Y) && !ellipse(29582.219025, 34487.215729, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29025.095642, 34413.281128, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27548.979004, 34265.443787, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28468.238000, 34025.380000, 1631.832047, 1631.832047, 0.000000, X, Y) && !ellipse(29478.131256, 35432.695557, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27866.071200, 36028.628200, 1697.768049, 1697.768049, 0.000000, X, Y) && !ellipse(27784.459600, 38702.626000, 2896.784083, 2896.784083, 0.000000, X, Y) && !ellipse(31966.801727, 34009.573303, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27864.765340, 36793.333400, 1381.712040, 1381.712040, 0.000000, X, Y) && !ellipse(28245.223267, 36487.594452, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32642.512000, 36483.938000, 2301.696066, 2301.696066, 0.000000, X, Y) && !ellipse(32505.716919, 35606.764587, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31838.170000, 35439.384000, 1723.496050, 1723.496050, 0.000000, X, Y) && !ellipse(30297.376000, 35673.288200, 1371.584039, 1371.584039, 0.000000, X, Y) && !ellipse(28221.484000, 34683.762000, 1075.368031, 1075.368031, 0.000000, X, Y) && !ellipse(30098.756000, 35513.850000, 1077.880031, 1077.880031, 0.000000, X, Y) && !ellipse(30804.268000, 35003.224000, 1414.624041, 435.500013, 97.094480, X, Y) && !ellipse(32797.018768, 34830.696869, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31606.376190, 34562.432709, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32531.125549, 34008.410400, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30847.294200, 35470.608000, 1850.128053, 1850.128053, 0.000000, X, Y)
[Fri Mar 30 21:02:35 2012] Writing fullrun_mos1_xmm0412591401_pi300-10000_pass1_cl_src12.gif
[Fri Mar 30 21:28:39 2012] Mean detx,y = (7082.96, 2298.82) 
[Fri Mar 30 21:28:41 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Mar 30 21:29:00 2012] Binned source spectrum to 10 counts/bin
[Fri Mar 30 21:29:00 2012] Setting source spectrum file to fullrun_mos1_xmm0412591401_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Fri Mar 30 21:29:00 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0412591401_pi300-10000_pass1_cl_src12_bgd.pi.gz
[Sat Mar 31 00:09:36 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Mar 31 00:09:36 2012] rmf not generated due to insufficient counts
[Sat Mar 31 11:26:31 2012] Updating aperture counts using extracted products
[Sat Mar 31 11:26:31 2012] Error reading totcts from fullrun_mos1_xmm0412591401_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Sat Mar 31 11:26:39 2012] Calculating source flux in energy range 0.30-8.00
[Sat Mar 31 11:26:39 2012] Using photon index=1.80, rate=0.0696, arf fullrun_mos1_xmm0412591401_pi300-10000_pass1_cl_src12.arf
[Sat Mar 31 11:26:39 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Mar 31 11:26:40 2012] Updating source flux to 1.1e-12
[Sat Mar 31 11:27:12 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting