[Wed Mar 28 00:29:48 2012] Detection parameters:
  Position = (273.0, 395.9) = 5 34 44.57 22 6 25.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 308.1 +/- 28.6
  Background counts = 479.3
  Rate = 0.01 +/- 0.001

[Wed Mar 28 00:29:50 2012] Off-axis axis estimate = 7.31'
[Wed Mar 28 00:39:22 2012] Using EEF radius (= 10.08 ")to estimate initial spatial extent for simple fitting
[Wed Mar 28 00:39:22 2012] Initial guess for spatial extent in simple fitting = 10.08"
[Wed Mar 28 00:39:22 2012] source mask rpix=2.3, npix_max = 31, mask sum = 30, frac = 0.945
[Wed Mar 28 00:39:22 2012] Giving source the simple spatial ID 93 for pass 0, mean size = 10.08"
[Wed Mar 28 10:34:49 2012] fullrun_mos1_xmm0412591401_pi300-10000_cl_pass0_src93.ximg exists
[Wed Mar 28 10:34:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591401_pi300-10000_cl_pass0_src93.csv
[Wed Mar 28 10:34:49 2012] fullrun_mos1_xmm0412591401_pi300-10000_cl_pass0_src93_1.ximg exists
[Wed Mar 28 10:34:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591401_pi300-10000_cl_pass0_src93.csv
[Wed Mar 28 10:34:49 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412591401_pi300-10000_cl_pass0_src93_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412591401_pi300-10000_cl_pass0_src93.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 28 10:34:53 2012] fullrun_mos1_xmm0412591401_pi300-10000_cl_pass0_tfrozen_src93.ximg exists
[Wed Mar 28 10:34:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591401_pi300-10000_cl_pass0_tfrozen_src93.csv
[Wed Mar 28 10:34:53 2012] fullrun_mos1_xmm0412591401_pi300-10000_cl_pass0_tfrozen_src93_1.ximg exists
[Wed Mar 28 10:34:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591401_pi300-10000_cl_pass0_tfrozen_src93.csv
[Wed Mar 28 10:34:53 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412591401_pi300-10000_cl_pass0_tfrozen_src93_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412591401_pi300-10000_cl_pass0_tfrozen_src93.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 29 00:24:54 2012] Warning, spatial fit 93 centroid is now closest to src. 89
[Thu Mar 29 00:24:54 2012] Vigneting correction estimate = 1.000000
[Thu Mar 29 00:24:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar 29 00:24:54 2012] Assessing source extent using major
[Thu Mar 29 00:24:54 2012] Source does appear to be extended
[Thu Mar 29 00:24:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar 29 00:24:54 2012] Source is confused with source 8
[Thu Mar 29 00:26:12 2012] Using EEF radius (= 10.08 ")to estimate initial spatial extent for simple fitting
[Thu Mar 29 00:26:12 2012] Initial guess for spatial extent in simple fitting = 10.08"
[Thu Mar 29 00:26:12 2012] source mask rpix=2.3, npix_max = 31, mask sum = 30, frac = 0.945
[Thu Mar 29 00:26:12 2012] Giving source the simple spatial ID 81 for pass 1, mean size = 10.08"
[Thu Mar 29 11:04:48 2012] fullrun_mos1_xmm0412591401_pi300-10000_cl_pass1_src81.ximg exists
[Thu Mar 29 11:04:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591401_pi300-10000_cl_pass1_src81.csv
[Thu Mar 29 11:04:48 2012] fullrun_mos1_xmm0412591401_pi300-10000_cl_pass1_src81_1.ximg exists
[Thu Mar 29 11:04:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591401_pi300-10000_cl_pass1_src81.csv
[Thu Mar 29 11:04:48 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412591401_pi300-10000_cl_pass1_src81_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412591401_pi300-10000_cl_pass1_src81.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 29 11:04:55 2012] fullrun_mos1_xmm0412591401_pi300-10000_cl_pass1_tfrozen_src81.ximg exists
[Thu Mar 29 11:04:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591401_pi300-10000_cl_pass1_tfrozen_src81.csv
[Thu Mar 29 11:04:55 2012] fullrun_mos1_xmm0412591401_pi300-10000_cl_pass1_tfrozen_src81_1.ximg exists
[Thu Mar 29 11:04:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591401_pi300-10000_cl_pass1_tfrozen_src81.csv
[Thu Mar 29 11:04:55 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412591401_pi300-10000_cl_pass1_tfrozen_src81_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412591401_pi300-10000_cl_pass1_tfrozen_src81.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 30 21:00:59 2012] Spatial fit model total counts = 8818.910000, observed total counts = 8643.000000
[Fri Mar 30 21:00:59 2012] Offset between fit and detection position for source 101 = 3.616068 pixels
[Fri Mar 30 21:00:59 2012] Warning, changing simple spatial fit ID from 81 to 70
[Fri Mar 30 21:00:59 2012] 8474.336000 total counts/ 7627.150000 bgd. counts: snr = 9.700578
Spatial fit parameters:
  Offset between fit and detection position for source 101 = 3.616068 pixels
  Position = (276.3, 397.5) = 5 34 43.55 22 6 43.7
  Extent = 20.4 (19.2-40.8)", rotation angle = 0
  Source counts = 847.2 +/- 92.1
  Background counts = 7627.1
  Rate = 0.04 +/- 0.004
[Fri Mar 30 21:01:00 2012] Vigneting correction estimate = 1.000000
[Fri Mar 30 21:01:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 30 21:01:00 2012] Assessing source extent using major axis lower bound
[Fri Mar 30 21:01:00 2012] Source does appear to be extended
[Fri Mar 30 21:01:00 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar 30 21:02:46 2012] XMMSAS src. selection expression = ellipse(23987.394000, 34531.286000, 1224.444035, 1224.444035, 0.000000, X, Y)
[Fri Mar 30 21:02:46 2012] Writing source region out to fullrun_mos1_xmm0412591401_pi300-10000_pass1_cl_src101_src.reg
[Fri Mar 30 21:02:46 2012] Extracting stamp from image fullrun_mos1_xmm0412591401_pi300-10000_cl_sm2.00.img.gz, (206, 327) - (347, 468)
[Fri Mar 30 21:02:46 2012] XMMSAS bgd. selection expression = annulus(23987.394000, 34531.286000, 2040.740059, 4081.480117, X, Y) && !ellipse(20696.340424, 31102.825989, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20699.600800, 31455.992676, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27666.990600, 35274.359800, 1341.008039, 1341.008039, 0.000000, X, Y) && !ellipse(23136.084015, 34438.416290, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25903.938782, 34307.449005, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27548.979004, 34265.443787, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28468.238000, 34025.380000, 1631.832047, 1631.832047, 0.000000, X, Y) && !ellipse(24925.310913, 34369.826263, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20692.485321, 33291.249817, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27792.296000, 40474.758000, 2022.256058, 2022.256058, 0.000000, X, Y) && !ellipse(24333.005737, 34438.307434, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28242.062660, 38696.928000, 1843.344053, 1843.344053, 0.000000, X, Y) && !ellipse(27662.834000, 38105.250000, 1544.568044, 1544.568044, 0.000000, X, Y) && !ellipse(27866.071200, 36028.628200, 1697.768049, 1697.768049, 0.000000, X, Y) && !ellipse(24851.891388, 34923.930878, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27784.459600, 38702.626000, 2896.784083, 2896.784083, 0.000000, X, Y) && !ellipse(28305.614563, 37969.945099, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27259.559570, 37622.115021, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28355.651245, 37195.831482, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27864.765340, 36793.333400, 1381.712040, 1381.712040, 0.000000, X, Y) && !ellipse(28245.223267, 36487.594452, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23476.291504, 35775.268677, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24883.850000, 35480.212000, 204.073606, 204.073606, -0.000000, X, Y) && !ellipse(28221.484000, 34683.762000, 1075.368031, 1075.368031, 0.000000, X, Y) && !ellipse(25578.620000, 35157.678000, 1087.016031, 1087.016031, 0.000000, X, Y) && !ellipse(21605.134384, 35093.481049, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24345.917145, 34838.770813, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23601.269043, 34833.734222, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20962.001328, 34828.941895, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25650.152000, 34676.810000, 1412.464041, 1412.464041, 0.000000, X, Y) && !ellipse(22802.808807, 34519.747803, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21761.921829, 34529.048370, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20526.998672, 30495.310150, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20442.036407, 29720.928375, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Mar 30 21:02:46 2012] Writing fullrun_mos1_xmm0412591401_pi300-10000_pass1_cl_src101.gif
[Fri Mar 30 23:08:59 2012] Mean detx,y = (7354.69, -3728.63) 
[Fri Mar 30 23:09:01 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Mar 30 23:10:03 2012] Binned source spectrum to 10 counts/bin
[Fri Mar 30 23:10:03 2012] Setting source spectrum file to fullrun_mos1_xmm0412591401_pi300-10000_pass1_cl_src101_src_b10.pi.gz
[Fri Mar 30 23:10:03 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0412591401_pi300-10000_pass1_cl_src101_bgd.pi.gz
[Sat Mar 31 11:26:36 2012] Updating aperture counts using extracted products
[Sat Mar 31 11:26:36 2012] Error reading totcts from fullrun_mos1_xmm0412591401_pi300-10000_pass1_cl_src101_src_b10.pi.gz
[Sat Mar 31 11:26:44 2012] Calculating source flux in energy range 0.30-8.00
[Sat Mar 31 11:26:44 2012] Using photon index=1.80, rate=0.0388, arf fullrun_mos1_xmm0412591401_pi300-10000_pass1_cl_src101.arf
[Sat Mar 31 11:26:44 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Mar 31 11:26:45 2012] Updating source flux to 6.4e-13
[Sat Mar 31 11:27:12 2012] Flag c found in src. 101 procflags, skipping spectral fitting