[Mon Feb 20 09:43:55 2012] Detection parameters:
  Position = (365.7, 280.0) = 5 34 6.54 22 0 54.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 310.0 +/- 36.0
  Background counts = 436.2
  Rate = 0.03 +/- 0.004

[Mon Feb 20 09:43:56 2012] Off-axis axis estimate = 5.06'
[Mon Feb 20 19:05:59 2012] Using EEF radius (= 8.96 ")to estimate initial spatial extent for simple fitting
[Mon Feb 20 19:05:59 2012] Initial guess for spatial extent in simple fitting = 8.96"
[Mon Feb 20 19:05:59 2012] source mask rpix=2.1, npix_max = 26, mask sum = 30, frac = 1.145
[Mon Feb 20 19:05:59 2012] Giving source the simple spatial ID 53 for pass 0, mean size = 8.96"
[Tue Feb 21 07:26:32 2012] fullrun_mos2_xmm0412591201_pi300-10000_cl_pass0_src53.ximg exists
[Tue Feb 21 07:26:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591201_pi300-10000_cl_pass0_src53.csv
[Tue Feb 21 07:26:32 2012] fullrun_mos2_xmm0412591201_pi300-10000_cl_pass0_src53_1.ximg exists
[Tue Feb 21 07:26:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591201_pi300-10000_cl_pass0_src53.csv
[Tue Feb 21 07:26:32 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412591201_pi300-10000_cl_pass0_src53_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412591201_pi300-10000_cl_pass0_src53.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 21 07:26:36 2012] fullrun_mos2_xmm0412591201_pi300-10000_cl_pass0_tfrozen_src53.ximg exists
[Tue Feb 21 07:26:36 2012] fullrun_mos2_xmm0412591201_pi300-10000_cl_pass0_tfrozen_src53_1.ximg exists
[Tue Feb 21 07:26:36 2012] Fit fullrun_mos2_xmm0412591201_pi300-10000_cl_pass0_tfrozen_src53 appears to have run properly
[Tue Feb 21 07:27:20 2012] Warning, spatial fit 53 centroid is now closest to src. 97
[Tue Feb 21 07:27:20 2012] Vigneting correction estimate = 1.000000
[Tue Feb 21 07:27:20 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 21 07:27:20 2012] Assessing source extent using major
[Tue Feb 21 07:27:20 2012] Source does appear to be extended
[Tue Feb 21 07:27:20 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 21 07:27:20 2012] Source is confused with source 96
[Tue Feb 21 22:13:39 2012] Using EEF radius (= 8.96 ")to estimate initial spatial extent for simple fitting
[Tue Feb 21 22:13:39 2012] Initial guess for spatial extent in simple fitting = 8.96"
[Tue Feb 21 22:13:39 2012] source mask rpix=2.1, npix_max = 26, mask sum = 30, frac = 1.145
[Tue Feb 21 22:13:39 2012] Giving source the simple spatial ID 50 for pass 1, mean size = 8.96"
[Wed Feb 22 17:00:32 2012] fullrun_mos2_xmm0412591201_pi300-10000_cl_pass1_src50.ximg exists
[Wed Feb 22 17:00:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591201_pi300-10000_cl_pass1_src50.csv
[Wed Feb 22 17:00:32 2012] fullrun_mos2_xmm0412591201_pi300-10000_cl_pass1_src50_1.ximg exists
[Wed Feb 22 17:00:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591201_pi300-10000_cl_pass1_src50.csv
[Wed Feb 22 17:00:32 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412591201_pi300-10000_cl_pass1_src50_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412591201_pi300-10000_cl_pass1_src50.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Feb 22 17:00:36 2012] fullrun_mos2_xmm0412591201_pi300-10000_cl_pass1_tfrozen_src50.ximg exists
[Wed Feb 22 17:00:36 2012] fullrun_mos2_xmm0412591201_pi300-10000_cl_pass1_tfrozen_src50_1.ximg exists
[Wed Feb 22 17:00:36 2012] Fit fullrun_mos2_xmm0412591201_pi300-10000_cl_pass1_tfrozen_src50 appears to have run properly
[Wed Feb 22 17:01:43 2012] Warning, spatial fit 50 centroid is now closest to src. 89
[Wed Feb 22 17:01:43 2012] Vigneting correction estimate = 1.000000
[Wed Feb 22 17:01:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Feb 22 17:01:43 2012] Assessing source extent using major
[Wed Feb 22 17:01:43 2012] Source does appear to be extended
[Wed Feb 22 17:01:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Feb 22 21:58:26 2012] XMMSAS src. selection expression = ellipse(31770.295044, 24310.974304, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Feb 22 21:58:26 2012] Writing source region out to fullrun_mos2_xmm0412591201_pi300-10000_pass1_cl_src93_src.reg
[Wed Feb 22 21:58:26 2012] Extracting stamp from image fullrun_mos2_xmm0412591201_pi300-10000_cl_sm2.00.img.gz, (328, 242) - (403, 317)
[Wed Feb 22 21:58:26 2012] XMMSAS bgd. selection expression = annulus(31770.295044, 24310.974304, 1087.500000, 2175.000000, X, Y) && !ellipse(32676.062000, 27297.578000, 1460.760042, 1460.760042, 0.000000, X, Y) && !ellipse(31526.512909, 23874.126404, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31729.487244, 25787.120148, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31522.992340, 23266.817657, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31318.604000, 21029.756000, 1555.816045, 194.476806, 272.355000, X, Y) && !ellipse(31700.077484, 22056.636719, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31830.309326, 25169.878937, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31859.764000, 27035.697600, 1460.760042, 1460.760042, 0.000000, X, Y) && !ellipse(31608.147095, 21534.136246, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31813.202972, 24738.999542, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32537.362000, 23439.502000, 1401.688040, 1401.688040, 0.000000, X, Y) && !ellipse(31838.929000, 26658.451200, 1244.048036, 1244.048036, 0.000000, X, Y) && !ellipse(31680.853000, 20813.024000, 1583.488046, 1583.488046, 0.000000, X, Y) && !ellipse(31409.276000, 20222.946000, 2114.704061, 1091.272031, 96.848760, X, Y) && !ellipse(32432.231600, 28037.240000, 2921.520084, 2921.520084, 0.000000, X, Y) && !ellipse(32684.474731, 21964.958557, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32304.441803, 27014.707458, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33110.444977, 22156.188370, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32710.438263, 21283.963455, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33254.504000, 21157.933400, 1606.632046, 1606.632046, 324.851400, X, Y) && !ellipse(32911.036346, 24420.892517, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Feb 22 21:58:26 2012] Writing fullrun_mos2_xmm0412591201_pi300-10000_pass1_cl_src93.gif
[Wed Feb 22 23:49:05 2012] Mean detx,y = (7204.76, -354.92) 
[Wed Feb 22 23:49:08 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Feb 22 23:49:23 2012] Binned source spectrum to 10 counts/bin
[Wed Feb 22 23:49:23 2012] Setting source spectrum file to fullrun_mos2_xmm0412591201_pi300-10000_pass1_cl_src93_src_b10.pi.gz
[Wed Feb 22 23:49:23 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0412591201_pi300-10000_pass1_cl_src93_bgd.pi.gz
[Thu Feb 23 04:15:19 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Feb 23 04:15:19 2012] rmf not generated due to insufficient counts
[Thu Feb 23 06:23:41 2012] Updating aperture counts using extracted products
[Thu Feb 23 06:23:41 2012] Error reading totcts from fullrun_mos2_xmm0412591201_pi300-10000_pass1_cl_src93_src_b10.pi.gz
[Thu Feb 23 06:23:46 2012] Calculating source flux in energy range 0.30-8.00
[Thu Feb 23 06:23:46 2012] Using photon index=1.80, rate=0.0346, arf fullrun_mos2_xmm0412591201_pi300-10000_pass1_cl_src93.arf
[Thu Feb 23 06:23:46 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Feb 23 06:23:46 2012] Updating source flux to 6.3e-13
[Thu Feb 23 06:33:04 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting