[Mon Feb 20 09:43:55 2012] Detection parameters:
  Position = (373.2, 296.2) = 5 34 4.20 22 2 3.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 234.9 +/- 32.8
  Background counts = 394.9
  Rate = 0.03 +/- 0.004

[Mon Feb 20 09:43:56 2012] Off-axis axis estimate = 5.42'
[Mon Feb 20 19:05:59 2012] Using EEF radius (= 9.14 ")to estimate initial spatial extent for simple fitting
[Mon Feb 20 19:05:59 2012] Initial guess for spatial extent in simple fitting = 9.14"
[Mon Feb 20 19:05:59 2012] source mask rpix=2.1, npix_max = 27, mask sum = 25, frac = 0.924
[Mon Feb 20 19:05:59 2012] Giving source the simple spatial ID 72 for pass 0, mean size = 9.14"
[Tue Feb 21 07:26:33 2012] fullrun_mos2_xmm0412591201_pi300-10000_cl_pass0_src72.ximg exists
[Tue Feb 21 07:26:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591201_pi300-10000_cl_pass0_src72.csv
[Tue Feb 21 07:26:33 2012] fullrun_mos2_xmm0412591201_pi300-10000_cl_pass0_src72_1.ximg exists
[Tue Feb 21 07:26:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591201_pi300-10000_cl_pass0_src72.csv
[Tue Feb 21 07:26:33 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412591201_pi300-10000_cl_pass0_src72_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412591201_pi300-10000_cl_pass0_src72.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 21 07:26:36 2012] fullrun_mos2_xmm0412591201_pi300-10000_cl_pass0_tfrozen_src72.ximg exists
[Tue Feb 21 07:26:36 2012] fullrun_mos2_xmm0412591201_pi300-10000_cl_pass0_tfrozen_src72_1.ximg exists
[Tue Feb 21 07:26:36 2012] Fit fullrun_mos2_xmm0412591201_pi300-10000_cl_pass0_tfrozen_src72 appears to have run properly
[Tue Feb 21 07:27:20 2012] Source 86 is offset by -1.013277 and 2.005308 pixels which is larger than
2 X fitted extent = 1.026938 x 1.026938, not incorporating fit results
[Tue Feb 21 07:27:20 2012] Spatial fit model total counts = 4702.390000, observed total counts = 4761.000000
[Tue Feb 21 07:27:20 2012] Offset between fit and detection position for source 86 = 2.549025 pixels
[Tue Feb 21 07:27:20 2012] Warning, changing simple spatial fit ID from 72 to 46
[Tue Feb 21 07:27:20 2012] 4750.420024 total counts/ 4750.420000 bgd. counts: snr = 0.000000
Spatial fit parameters:
  Offset between fit and detection position for source 86 = 2.549025 pixels
  Position = (375.2, 297.8) = 5 34 3.57 22 2 13.0
  Extent = 17.9 (17.8-35.7)", rotation angle = 0
  Source counts = 0.0 +/- 68.9
  Background counts = 4750.4
  Rate = 2e-09 +/- 0.005
  Deleting source due to low Poisson probability