[Mon Feb 20 09:43:54 2012] Detection parameters:
  Position = (374.6, 315.1) = 5 34 3.74 22 3 47.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 621.1 +/- 83.9
  Background counts = 415.5
  Rate = 0.09 +/- 0.01

[Mon Feb 20 09:43:56 2012] Off-axis axis estimate = 5.66'
[Mon Feb 20 19:05:59 2012] Using EEF radius (= 9.26 ")to estimate initial spatial extent for simple fitting
[Mon Feb 20 19:05:59 2012] Initial guess for spatial extent in simple fitting = 9.26"
[Mon Feb 20 19:05:59 2012] source mask rpix=2.1, npix_max = 27, mask sum = 30, frac = 1.086
[Mon Feb 20 19:05:59 2012] Giving source the simple spatial ID 7 for pass 0, mean size = 9.26"
[Tue Feb 21 07:26:31 2012] fullrun_mos2_xmm0412591201_pi300-10000_cl_pass0_src7.ximg exists
[Tue Feb 21 07:26:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591201_pi300-10000_cl_pass0_src7.csv
[Tue Feb 21 07:26:31 2012] fullrun_mos2_xmm0412591201_pi300-10000_cl_pass0_src7_1.ximg exists
[Tue Feb 21 07:26:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591201_pi300-10000_cl_pass0_src7.csv
[Tue Feb 21 07:26:31 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412591201_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412591201_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 21 07:26:34 2012] fullrun_mos2_xmm0412591201_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Tue Feb 21 07:26:34 2012] fullrun_mos2_xmm0412591201_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Tue Feb 21 07:26:34 2012] Fit fullrun_mos2_xmm0412591201_pi300-10000_cl_pass0_tfrozen_src7 appears to have run properly
[Tue Feb 21 07:27:20 2012] Warning, spatial fit 7 centroid is now closest to src. 82
[Tue Feb 21 07:27:20 2012] Spatial fit model total counts = 5769.970000, observed total counts = 5764.000000
[Tue Feb 21 07:27:20 2012] Offset between fit and detection position for source 8 = 1.702154 pixels
[Tue Feb 21 07:27:20 2012] Warning, changing simple spatial fit ID from 7 to 85
[Tue Feb 21 07:27:20 2012] 5508.900000 total counts/ 4643.120000 bgd. counts: snr = 12.705817
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 1.702154 pixels
  Position = (376.1, 314.3) = 5 34 3.28 22 3 24.9
  Extent = 18.3 (18.2-36.5)", rotation angle = 0
  Source counts = 865.8 +/- 74.2
  Background counts = 4643.1
  Rate = 0.06 +/- 0.005
[Tue Feb 21 07:27:20 2012] Vigneting correction estimate = 1.000000
[Tue Feb 21 07:27:20 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 21 07:27:20 2012] Assessing source extent using major axis lower bound
[Tue Feb 21 07:27:20 2012] Source does appear to be extended
[Tue Feb 21 07:27:20 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 21 07:27:20 2012] Source is confused with source 79
[Tue Feb 21 07:27:20 2012] Source is confused with source 81
[Tue Feb 21 07:27:20 2012] Source is confused with source 76
[Tue Feb 21 22:13:39 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Feb 21 22:13:39 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Feb 21 22:13:39 2012] Initial guess for spatial extent in simple fitting = 18.26"
[Tue Feb 21 22:13:39 2012] source mask rpix=4.2, npix_max = 88, mask sum = 82, frac = 0.929
[Tue Feb 21 22:13:39 2012] Giving source the simple spatial ID 7 for pass 1, mean size = 18.26"
[Wed Feb 22 17:00:31 2012] fullrun_mos2_xmm0412591201_pi300-10000_cl_pass1_src7.ximg exists
[Wed Feb 22 17:00:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591201_pi300-10000_cl_pass1_src7.csv
[Wed Feb 22 17:00:31 2012] fullrun_mos2_xmm0412591201_pi300-10000_cl_pass1_src7_1.ximg exists
[Wed Feb 22 17:00:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591201_pi300-10000_cl_pass1_src7.csv
[Wed Feb 22 17:00:31 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412591201_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412591201_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Feb 22 17:00:34 2012] fullrun_mos2_xmm0412591201_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Wed Feb 22 17:00:34 2012] fullrun_mos2_xmm0412591201_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Wed Feb 22 17:00:34 2012] Fit fullrun_mos2_xmm0412591201_pi300-10000_cl_pass1_tfrozen_src7 appears to have run properly
[Wed Feb 22 17:01:42 2012] Warning, spatial fit 7 centroid is now closest to src. 72
[Wed Feb 22 17:01:43 2012] Vigneting correction estimate = 1.000000
[Wed Feb 22 17:01:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Feb 22 17:01:43 2012] Assessing source extent using major axis lower bound
[Wed Feb 22 17:01:43 2012] Source does appear to be extended
[Wed Feb 22 17:01:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Feb 22 21:58:19 2012] XMMSAS src. selection expression = ellipse(32676.062000, 27297.578000, 1095.570032, 1095.570032, 0.000000, X, Y)
[Wed Feb 22 21:58:19 2012] Writing source region out to fullrun_mos2_xmm0412591201_pi300-10000_pass1_cl_src8_src.reg
[Wed Feb 22 21:58:19 2012] Extracting stamp from image fullrun_mos2_xmm0412591201_pi300-10000_cl_sm2.00.img.gz, (313, 251) - (439, 377)
[Wed Feb 22 21:58:19 2012] XMMSAS bgd. selection expression = annulus(32676.062000, 27297.578000, 1825.950053, 3651.900105, X, Y) && !ellipse(31526.512909, 23874.126404, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31729.487244, 25787.120148, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31522.992340, 23266.817657, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31830.309326, 25169.878937, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31859.764000, 27035.697600, 1460.760042, 1460.760042, 0.000000, X, Y) && !ellipse(26453.594000, 31611.798200, 2638.680076, 2638.680076, 0.000000, X, Y) && !ellipse(31813.202972, 24738.999542, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32537.362000, 23439.502000, 1401.688040, 1401.688040, 0.000000, X, Y) && !ellipse(31838.929000, 26658.451200, 1244.048036, 1244.048036, 0.000000, X, Y) && !ellipse(31770.295044, 24310.974304, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28483.490906, 31268.908691, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32432.231600, 28037.240000, 2921.520084, 2921.520084, 0.000000, X, Y) && !ellipse(27907.371400, 31363.425400, 1305.248038, 1305.248038, 0.000000, X, Y) && !ellipse(28837.205000, 31301.463000, 1446.976042, 1446.976042, 0.000000, X, Y) && !ellipse(32304.441803, 27014.707458, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32066.142303, 27502.778839, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31672.066925, 27963.399872, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32911.036346, 24420.892517, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Feb 22 21:58:19 2012] Writing fullrun_mos2_xmm0412591201_pi300-10000_pass1_cl_src8.gif
[Wed Feb 22 22:03:22 2012] Mean detx,y = (7759.54, -3350.85) 
[Wed Feb 22 22:03:24 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Feb 22 22:03:44 2012] Binned source spectrum to 10 counts/bin
[Wed Feb 22 22:03:44 2012] Setting source spectrum file to fullrun_mos2_xmm0412591201_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Wed Feb 22 22:03:44 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0412591201_pi300-10000_pass1_cl_src8_bgd.pi.gz
[Thu Feb 23 06:23:39 2012] Updating aperture counts using extracted products
[Thu Feb 23 06:23:39 2012] Error reading totcts from fullrun_mos2_xmm0412591201_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Thu Feb 23 06:23:44 2012] Calculating source flux in energy range 0.30-8.00
[Thu Feb 23 06:23:44 2012] Using photon index=1.80, rate=0.0639, arf fullrun_mos2_xmm0412591201_pi300-10000_pass1_cl_src8.arf
[Thu Feb 23 06:23:44 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Feb 23 06:23:44 2012] Updating source flux to 1.1e-12
[Thu Feb 23 06:33:04 2012] Flag c found in src. 8 procflags, skipping spectral fitting