[Mon Feb 20 09:43:55 2012] Detection parameters:
  Position = (314.2, 371.8) = 5 34 22.65 22 7 40.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 243.7 +/- 29.0
  Background counts = 426.0
  Rate = 0.03 +/- 0.003

[Mon Feb 20 09:43:56 2012] Off-axis axis estimate = 5.44'
[Mon Feb 20 19:05:59 2012] Using EEF radius (= 9.15 ")to estimate initial spatial extent for simple fitting
[Mon Feb 20 19:05:59 2012] Initial guess for spatial extent in simple fitting = 9.15"
[Mon Feb 20 19:05:59 2012] source mask rpix=2.1, npix_max = 27, mask sum = 22, frac = 0.812
[Mon Feb 20 19:05:59 2012] Giving source the simple spatial ID 67 for pass 0, mean size = 9.15"
[Tue Feb 21 07:26:33 2012] fullrun_mos2_xmm0412591201_pi300-10000_cl_pass0_src67.ximg exists
[Tue Feb 21 07:26:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591201_pi300-10000_cl_pass0_src67.csv
[Tue Feb 21 07:26:33 2012] fullrun_mos2_xmm0412591201_pi300-10000_cl_pass0_src67_1.ximg exists
[Tue Feb 21 07:26:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591201_pi300-10000_cl_pass0_src67.csv
[Tue Feb 21 07:26:33 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412591201_pi300-10000_cl_pass0_src67_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412591201_pi300-10000_cl_pass0_src67.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 21 07:26:36 2012] fullrun_mos2_xmm0412591201_pi300-10000_cl_pass0_tfrozen_src67.ximg exists
[Tue Feb 21 07:26:36 2012] fullrun_mos2_xmm0412591201_pi300-10000_cl_pass0_tfrozen_src67_1.ximg exists
[Tue Feb 21 07:26:36 2012] Fit fullrun_mos2_xmm0412591201_pi300-10000_cl_pass0_tfrozen_src67 appears to have run properly
[Tue Feb 21 07:27:20 2012] Warning, spatial fit 67 centroid is now closest to src. 62
[Tue Feb 21 07:27:20 2012] Vigneting correction estimate = 1.000000
[Tue Feb 21 07:27:20 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 21 07:27:20 2012] Assessing source extent using major
[Tue Feb 21 07:27:20 2012] Source does appear to be extended
[Tue Feb 21 07:27:20 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 21 07:27:20 2012] Source is confused with source 62
[Tue Feb 21 22:13:39 2012] Using EEF radius (= 9.15 ")to estimate initial spatial extent for simple fitting
[Tue Feb 21 22:13:39 2012] Initial guess for spatial extent in simple fitting = 9.15"
[Tue Feb 21 22:13:39 2012] source mask rpix=2.1, npix_max = 27, mask sum = 22, frac = 0.812
[Tue Feb 21 22:13:39 2012] Giving source the simple spatial ID 63 for pass 1, mean size = 9.15"
[Wed Feb 22 17:00:33 2012] fullrun_mos2_xmm0412591201_pi300-10000_cl_pass1_src63.ximg exists
[Wed Feb 22 17:00:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591201_pi300-10000_cl_pass1_src63.csv
[Wed Feb 22 17:00:33 2012] fullrun_mos2_xmm0412591201_pi300-10000_cl_pass1_src63_1.ximg exists
[Wed Feb 22 17:00:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591201_pi300-10000_cl_pass1_src63.csv
[Wed Feb 22 17:00:33 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412591201_pi300-10000_cl_pass1_src63_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412591201_pi300-10000_cl_pass1_src63.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Feb 22 17:00:37 2012] fullrun_mos2_xmm0412591201_pi300-10000_cl_pass1_tfrozen_src63.ximg exists
[Wed Feb 22 17:00:37 2012] fullrun_mos2_xmm0412591201_pi300-10000_cl_pass1_tfrozen_src63_1.ximg exists
[Wed Feb 22 17:00:37 2012] Fit fullrun_mos2_xmm0412591201_pi300-10000_cl_pass1_tfrozen_src63 appears to have run properly
[Wed Feb 22 17:01:43 2012] Warning, spatial fit 63 centroid is now closest to src. 46
[Wed Feb 22 17:01:43 2012] Vigneting correction estimate = 1.000000
[Wed Feb 22 17:01:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Feb 22 17:01:43 2012] Assessing source extent using major
[Wed Feb 22 17:01:43 2012] Source does appear to be extended
[Wed Feb 22 17:01:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Feb 22 21:58:28 2012] XMMSAS src. selection expression = ellipse(27288.204681, 32298.128143, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Feb 22 21:58:28 2012] Writing source region out to fullrun_mos2_xmm0412591201_pi300-10000_pass1_cl_src53_src.reg
[Wed Feb 22 21:58:28 2012] Extracting stamp from image fullrun_mos2_xmm0412591201_pi300-10000_cl_sm2.00.img.gz, (277, 334) - (352, 409)
[Wed Feb 22 21:58:28 2012] XMMSAS bgd. selection expression = annulus(27288.204681, 32298.128143, 1087.500000, 2175.000000, X, Y) && !ellipse(25474.394000, 31461.695200, 1026.104030, 1026.104030, 0.000000, X, Y) && !ellipse(24142.700020, 31551.406400, 1397.984040, 1397.984040, 0.000000, X, Y) && !ellipse(24367.340000, 31554.309200, 1414.800041, 1414.800041, 0.000000, X, Y) && !ellipse(26116.434800, 31368.530400, 1399.984040, 1399.984040, 0.000000, X, Y) && !ellipse(26223.455627, 32829.980957, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25370.260000, 32856.096000, 430.412012, 430.412012, 0.000000, X, Y) && !ellipse(24696.808000, 32352.930000, 525.672015, 525.672015, 0.000000, X, Y) && !ellipse(26453.594000, 31611.798200, 2638.680076, 2638.680076, 0.000000, X, Y) && !ellipse(28028.487915, 32251.391663, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24883.827300, 33961.380519, 1452.048042, 334.920181, 91.336020, X, Y) && !ellipse(27427.732000, 31431.355200, 1416.640041, 1416.640041, 0.000000, X, Y) && !ellipse(25312.005310, 33708.785034, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28483.490906, 31268.908691, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27392.539368, 32670.976562, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27907.371400, 31363.425400, 1305.248038, 1305.248038, 0.000000, X, Y) && !ellipse(28837.205000, 31301.463000, 1446.976042, 1446.976042, 0.000000, X, Y) && !ellipse(25696.142000, 33970.448600, 885.152025, 885.152025, 0.000000, X, Y) && !ellipse(24734.298000, 33602.250000, 1244.752036, 1244.752036, 0.000000, X, Y) && !ellipse(24842.281600, 34444.227200, 524.753615, 524.753615, 0.000000, X, Y) && !ellipse(25859.830780, 35070.934540, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Feb 22 21:58:28 2012] Writing fullrun_mos2_xmm0412591201_pi300-10000_pass1_cl_src53.gif
[Thu Feb 23 00:02:35 2012] Mean detx,y = (2188.25, -8026.50) 
[Thu Feb 23 00:02:36 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Feb 23 00:02:45 2012] Binned source spectrum to 10 counts/bin
[Thu Feb 23 00:02:46 2012] Setting source spectrum file to fullrun_mos2_xmm0412591201_pi300-10000_pass1_cl_src53_src_b10.pi.gz
[Thu Feb 23 00:02:46 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0412591201_pi300-10000_pass1_cl_src53_bgd.pi.gz
[Thu Feb 23 04:32:19 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Feb 23 04:32:19 2012] rmf not generated due to insufficient counts
[Thu Feb 23 06:23:41 2012] Updating aperture counts using extracted products
[Thu Feb 23 06:23:41 2012] Error reading totcts from fullrun_mos2_xmm0412591201_pi300-10000_pass1_cl_src53_src_b10.pi.gz
[Thu Feb 23 06:23:46 2012] Calculating source flux in energy range 0.30-8.00
[Thu Feb 23 06:23:46 2012] Using photon index=1.80, rate=0.0289, arf fullrun_mos2_xmm0412591201_pi300-10000_pass1_cl_src53.arf
[Thu Feb 23 06:23:46 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Feb 23 06:23:46 2012] Updating source flux to 5e-13
[Thu Feb 23 06:33:04 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting