[Mon Feb 20 09:43:55 2012] Detection parameters:
  Position = (269.4, 373.9) = 5 34 36.68 22 7 44.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 291.2 +/- 34.9
  Background counts = 408.0
  Rate = 0.03 +/- 0.003

[Mon Feb 20 09:43:56 2012] Off-axis axis estimate = 5.86'
[Mon Feb 20 19:05:59 2012] Using EEF radius (= 9.36 ")to estimate initial spatial extent for simple fitting
[Mon Feb 20 19:05:59 2012] Initial guess for spatial extent in simple fitting = 9.36"
[Mon Feb 20 19:05:59 2012] source mask rpix=2.2, npix_max = 28, mask sum = 30, frac = 1.067
[Mon Feb 20 19:05:59 2012] Giving source the simple spatial ID 69 for pass 0, mean size = 9.36"
[Tue Feb 21 07:26:33 2012] fullrun_mos2_xmm0412591201_pi300-10000_cl_pass0_src69.ximg exists
[Tue Feb 21 07:26:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591201_pi300-10000_cl_pass0_src69.csv
[Tue Feb 21 07:26:33 2012] fullrun_mos2_xmm0412591201_pi300-10000_cl_pass0_src69_1.ximg exists
[Tue Feb 21 07:26:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591201_pi300-10000_cl_pass0_src69.csv
[Tue Feb 21 07:26:33 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412591201_pi300-10000_cl_pass0_src69_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412591201_pi300-10000_cl_pass0_src69.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 21 07:26:36 2012] fullrun_mos2_xmm0412591201_pi300-10000_cl_pass0_tfrozen_src69.ximg exists
[Tue Feb 21 07:26:36 2012] fullrun_mos2_xmm0412591201_pi300-10000_cl_pass0_tfrozen_src69_1.ximg exists
[Tue Feb 21 07:26:36 2012] Fit fullrun_mos2_xmm0412591201_pi300-10000_cl_pass0_tfrozen_src69 appears to have run properly
[Tue Feb 21 07:27:20 2012] Spatial fit model total counts = 5605.620000, observed total counts = 5628.000000
[Tue Feb 21 07:27:20 2012] Offset between fit and detection position for source 49 = 3.531642 pixels
[Tue Feb 21 07:27:20 2012] 5294.281000 total counts/ 4670.180000 bgd. counts: snr = 9.132466
Spatial fit parameters:
  Offset between fit and detection position for source 49 = 3.531642 pixels
  Position = (271.8, 376.4) = 5 34 35.92 22 7 55.2
  Extent = 18.7 (18.6-37.4)", rotation angle = 0
  Source counts = 624.1 +/- 72.8
  Background counts = 4670.2
  Rate = 0.05 +/- 0.005
[Tue Feb 21 07:27:20 2012] Vigneting correction estimate = 1.000000
[Tue Feb 21 07:27:20 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 21 07:27:20 2012] Assessing source extent using major axis lower bound
[Tue Feb 21 07:27:20 2012] Source does appear to be extended
[Tue Feb 21 07:27:20 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 21 07:27:20 2012] Source is confused with source 52
[Tue Feb 21 22:13:39 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Feb 21 22:13:39 2012] Initial guess for spatial extent in simple fitting = 18.72"
[Tue Feb 21 22:13:39 2012] source mask rpix=4.3, npix_max = 92, mask sum = 90, frac = 0.975
[Tue Feb 21 22:13:39 2012] Giving source the simple spatial ID 65 for pass 1, mean size = 18.72"
[Wed Feb 22 17:00:33 2012] fullrun_mos2_xmm0412591201_pi300-10000_cl_pass1_src65.ximg exists
[Wed Feb 22 17:00:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591201_pi300-10000_cl_pass1_src65.csv
[Wed Feb 22 17:00:33 2012] fullrun_mos2_xmm0412591201_pi300-10000_cl_pass1_src65_1.ximg exists
[Wed Feb 22 17:00:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591201_pi300-10000_cl_pass1_src65.csv
[Wed Feb 22 17:00:33 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412591201_pi300-10000_cl_pass1_src65_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412591201_pi300-10000_cl_pass1_src65.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Feb 22 17:00:37 2012] fullrun_mos2_xmm0412591201_pi300-10000_cl_pass1_tfrozen_src65.ximg exists
[Wed Feb 22 17:00:37 2012] fullrun_mos2_xmm0412591201_pi300-10000_cl_pass1_tfrozen_src65_1.ximg exists
[Wed Feb 22 17:00:37 2012] Fit fullrun_mos2_xmm0412591201_pi300-10000_cl_pass1_tfrozen_src65 appears to have run properly
[Wed Feb 22 17:01:43 2012] Source 49 is offset by 2.798828 and -5.610108 pixels which is larger than
2 X fitted extent = 2.130469 x 2.130469, not incorporating fit results
[Wed Feb 22 17:01:43 2012] Warning, spatial fit 65 centroid is now closest to src. 50
[Wed Feb 22 17:01:43 2012] Source 49 is offset by 1.398023 and 2.921363 pixels which is larger than
2 X fitted extent = 1.886828 x 1.886828, not incorporating fit results
[Wed Feb 22 17:01:43 2012] Vigneting correction estimate = 1.000000
[Wed Feb 22 17:01:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Feb 22 17:01:43 2012] Assessing source extent using major axis lower bound
[Wed Feb 22 17:01:43 2012] Source does appear to be extended
[Wed Feb 22 17:01:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Feb 22 21:58:29 2012] XMMSAS src. selection expression = ellipse(23601.806000, 32701.228600, 1123.122032, 1123.122032, 0.000000, X, Y)
[Wed Feb 22 21:58:29 2012] Writing source region out to fullrun_mos2_xmm0412591201_pi300-10000_pass1_cl_src49_src.reg
[Wed Feb 22 21:58:29 2012] Extracting stamp from image fullrun_mos2_xmm0412591201_pi300-10000_cl_sm2.00.img.gz, (207, 312) - (336, 441)
[Wed Feb 22 21:58:29 2012] XMMSAS bgd. selection expression = annulus(23601.806000, 32701.228600, 1871.870054, 3743.740108, X, Y) && !ellipse(25474.394000, 31461.695200, 1026.104030, 1026.104030, 0.000000, X, Y) && !ellipse(24142.700020, 31551.406400, 1397.984040, 1397.984040, 0.000000, X, Y) && !ellipse(24367.340000, 31554.309200, 1414.800041, 1414.800041, 0.000000, X, Y) && !ellipse(23259.238000, 31629.730520, 1435.176041, 1435.176041, 0.000000, X, Y) && !ellipse(26116.434800, 31368.530400, 1399.984040, 1399.984040, 0.000000, X, Y) && !ellipse(26223.455627, 32829.980957, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25370.260000, 32856.096000, 430.412012, 430.412012, 0.000000, X, Y) && !ellipse(24696.808000, 32352.930000, 525.672015, 525.672015, 0.000000, X, Y) && !ellipse(26453.594000, 31611.798200, 2638.680076, 2638.680076, 0.000000, X, Y) && !ellipse(22853.922000, 31690.058000, 1477.936043, 1477.936043, 0.000000, X, Y) && !ellipse(28028.487915, 32251.391663, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21859.816000, 31715.703800, 1482.808043, 1482.808043, 0.000000, X, Y) && !ellipse(24883.827300, 33961.380519, 1452.048042, 334.920181, 91.336020, X, Y) && !ellipse(27427.732000, 31431.355200, 1416.640041, 1416.640041, 0.000000, X, Y) && !ellipse(25312.005310, 33708.785034, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24222.646790, 32410.090729, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22327.747070, 31707.989471, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27392.539368, 32670.976562, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20935.724001, 31685.599153, 1482.808043, 1195.037435, 3.013015, X, Y) && !ellipse(27288.204681, 32298.128143, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20326.312000, 31783.674000, 1592.512046, 1592.512046, 0.000000, X, Y) && !ellipse(27907.371400, 31363.425400, 1305.248038, 1305.248038, 0.000000, X, Y) && !ellipse(22294.510000, 32821.300000, 1519.856044, 1519.856044, 0.000000, X, Y) && !ellipse(25696.142000, 33970.448600, 885.152025, 885.152025, 0.000000, X, Y) && !ellipse(24734.298000, 33602.250000, 1244.752036, 1244.752036, 0.000000, X, Y) && !ellipse(24842.281600, 34444.227200, 524.753615, 524.753615, 0.000000, X, Y) && !ellipse(20000.463882, 31962.699707, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25965.532806, 36173.053131, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20911.960663, 32616.423676, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25859.830780, 35070.934540, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Feb 22 21:58:29 2012] Writing fullrun_mos2_xmm0412591201_pi300-10000_pass1_cl_src49.gif
[Thu Feb 23 00:11:43 2012] Mean detx,y = (-1482.91, -8149.23) 
[Thu Feb 23 00:11:46 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Feb 23 00:12:07 2012] Binned source spectrum to 10 counts/bin
[Thu Feb 23 00:12:07 2012] Setting source spectrum file to fullrun_mos2_xmm0412591201_pi300-10000_pass1_cl_src49_src_b10.pi.gz
[Thu Feb 23 00:12:07 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0412591201_pi300-10000_pass1_cl_src49_bgd.pi.gz
[Thu Feb 23 06:23:41 2012] Updating aperture counts using extracted products
[Thu Feb 23 06:23:41 2012] Error reading totcts from fullrun_mos2_xmm0412591201_pi300-10000_pass1_cl_src49_src_b10.pi.gz
[Thu Feb 23 06:23:46 2012] Calculating source flux in energy range 0.30-8.00
[Thu Feb 23 06:23:46 2012] Using photon index=1.80, rate=0.046, arf fullrun_mos2_xmm0412591201_pi300-10000_pass1_cl_src49.arf
[Thu Feb 23 06:23:46 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Feb 23 06:23:47 2012] Updating source flux to 7.4e-13
[Thu Feb 23 06:33:04 2012] Flag b found in src. 49 procflags, skipping spectral fitting
[Thu Feb 23 06:33:04 2012] Flag c found in src. 49 procflags, skipping spectral fitting