[Mon Feb 20 09:43:55 2012] Detection parameters:
  Position = (293.4, 372.8) = 5 34 29.15 22 7 40.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 616.3 +/- 38.9
  Background counts = 421.8
  Rate = 0.07 +/- 0.004

[Mon Feb 20 09:43:56 2012] Off-axis axis estimate = 5.40'
[Mon Feb 20 19:05:59 2012] Using EEF radius (= 9.13 ")to estimate initial spatial extent for simple fitting
[Mon Feb 20 19:05:59 2012] Initial guess for spatial extent in simple fitting = 9.13"
[Mon Feb 20 19:05:59 2012] source mask rpix=2.1, npix_max = 27, mask sum = 25, frac = 0.925
[Mon Feb 20 19:05:59 2012] Giving source the simple spatial ID 17 for pass 0, mean size = 9.13"
[Tue Feb 21 07:26:31 2012] fullrun_mos2_xmm0412591201_pi300-10000_cl_pass0_src17.ximg exists
[Tue Feb 21 07:26:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591201_pi300-10000_cl_pass0_src17.csv
[Tue Feb 21 07:26:32 2012] fullrun_mos2_xmm0412591201_pi300-10000_cl_pass0_src17_1.ximg exists
[Tue Feb 21 07:26:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591201_pi300-10000_cl_pass0_src17.csv
[Tue Feb 21 07:26:32 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412591201_pi300-10000_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412591201_pi300-10000_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 21 07:26:34 2012] fullrun_mos2_xmm0412591201_pi300-10000_cl_pass0_tfrozen_src17.ximg exists
[Tue Feb 21 07:26:34 2012] fullrun_mos2_xmm0412591201_pi300-10000_cl_pass0_tfrozen_src17_1.ximg exists
[Tue Feb 21 07:26:35 2012] Fit fullrun_mos2_xmm0412591201_pi300-10000_cl_pass0_tfrozen_src17 appears to have run properly
[Tue Feb 21 07:27:20 2012] Warning, spatial fit 17 centroid is now closest to src. 51
[Tue Feb 21 07:27:20 2012] Spatial fit model total counts = 6654.120000, observed total counts = 6680.000000
[Tue Feb 21 07:27:20 2012] Offset between fit and detection position for source 48 = 1.814697 pixels
[Tue Feb 21 07:27:20 2012] Warning, changing simple spatial fit ID from 17 to 23
[Tue Feb 21 07:27:20 2012] 5474.170025 total counts/ 5474.170000 bgd. counts: snr = 0.000000
Spatial fit parameters:
  Offset between fit and detection position for source 48 = 1.814697 pixels
  Position = (293.0, 371.0) = 5 34 29.31 22 7 31.7
  Extent = 17.5 (2.2-32.8)", rotation angle = 0
  Source counts = 0.0 +/- 74.0
  Background counts = 5474.2
  Rate = 2e-09 +/- 0.005
  Deleting source due to low Poisson probability