[Mon Feb 20 09:43:54 2012] Detection parameters:
  Position = (278.1, 108.0) = 5 34 33.95 21 48 27.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 823.7 +/- 41.2
  Background counts = 109.9
  Rate = 0.06 +/- 0.003

[Mon Feb 20 09:43:56 2012] Off-axis axis estimate = 13.88'
[Mon Feb 20 19:05:59 2012] Using EEF radius (= 13.37 ")to estimate initial spatial extent for simple fitting
[Mon Feb 20 19:05:59 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Feb 20 19:05:59 2012] Initial guess for spatial extent in simple fitting = 13.37"
[Mon Feb 20 19:05:59 2012] source mask rpix=3.1, npix_max = 51, mask sum = 56, frac = 1.096
[Mon Feb 20 19:05:59 2012] Giving source the simple spatial ID 20 for pass 0, mean size = 13.37"
[Tue Feb 21 07:26:32 2012] fullrun_mos2_xmm0412591201_pi300-10000_cl_pass0_src20.ximg exists
[Tue Feb 21 07:26:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591201_pi300-10000_cl_pass0_src20.csv
[Tue Feb 21 07:26:32 2012] fullrun_mos2_xmm0412591201_pi300-10000_cl_pass0_src20_1.ximg exists
[Tue Feb 21 07:26:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591201_pi300-10000_cl_pass0_src20.csv
[Tue Feb 21 07:26:32 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412591201_pi300-10000_cl_pass0_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412591201_pi300-10000_cl_pass0_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 21 07:26:35 2012] fullrun_mos2_xmm0412591201_pi300-10000_cl_pass0_tfrozen_src20.ximg exists
[Tue Feb 21 07:26:35 2012] fullrun_mos2_xmm0412591201_pi300-10000_cl_pass0_tfrozen_src20_1.ximg exists
[Tue Feb 21 07:26:35 2012] Fit fullrun_mos2_xmm0412591201_pi300-10000_cl_pass0_tfrozen_src20 appears to have run properly
[Tue Feb 21 07:27:20 2012] Warning, spatial fit 20 centroid is now closest to src. 2
[Tue Feb 21 07:27:20 2012] Source 3 is offset by 0.291348 and 4.102376 pixels which is larger than
2 X fitted extent = 2.987099 x 2.987099, not incorporating fit results
[Tue Feb 21 07:27:20 2012] Vigneting correction estimate = 1.000000
[Tue Feb 21 07:27:20 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 21 07:27:20 2012] Assessing source extent using major
[Tue Feb 21 07:27:20 2012] Source does appear to be extended
[Tue Feb 21 07:27:20 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 21 07:27:20 2012] Source is confused with source 27
[Tue Feb 21 22:13:39 2012] Using EEF radius (= 13.37 ")to estimate initial spatial extent for simple fitting
[Tue Feb 21 22:13:39 2012] Initial guess for spatial extent in simple fitting = 13.37"
[Tue Feb 21 22:13:39 2012] source mask rpix=3.1, npix_max = 51, mask sum = 56, frac = 1.096
[Tue Feb 21 22:13:39 2012] Giving source the simple spatial ID 19 for pass 1, mean size = 13.37"
[Wed Feb 22 17:00:31 2012] fullrun_mos2_xmm0412591201_pi300-10000_cl_pass1_src19.ximg exists
[Wed Feb 22 17:00:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591201_pi300-10000_cl_pass1_src19.csv
[Wed Feb 22 17:00:31 2012] fullrun_mos2_xmm0412591201_pi300-10000_cl_pass1_src19_1.ximg exists
[Wed Feb 22 17:00:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591201_pi300-10000_cl_pass1_src19.csv
[Wed Feb 22 17:00:31 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412591201_pi300-10000_cl_pass1_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412591201_pi300-10000_cl_pass1_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Feb 22 17:00:35 2012] fullrun_mos2_xmm0412591201_pi300-10000_cl_pass1_tfrozen_src19.ximg exists
[Wed Feb 22 17:00:35 2012] fullrun_mos2_xmm0412591201_pi300-10000_cl_pass1_tfrozen_src19_1.ximg exists
[Wed Feb 22 17:00:35 2012] Fit fullrun_mos2_xmm0412591201_pi300-10000_cl_pass1_tfrozen_src19 appears to have run properly
[Wed Feb 22 17:01:43 2012] Warning, spatial fit 19 centroid is now closest to src. 2
[Wed Feb 22 17:01:43 2012] Warning: source 31 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 22.537578 pixels away
[Wed Feb 22 17:01:43 2012] Warning: source 38 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 12.309317 pixels away
[Wed Feb 22 17:01:43 2012] Vigneting correction estimate = 1.000000
[Wed Feb 22 17:01:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Feb 22 17:01:43 2012] Assessing source extent using major
[Wed Feb 22 17:01:43 2012] Source does appear to be extended
[Wed Feb 22 17:01:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Feb 22 21:58:20 2012] XMMSAS src. selection expression = ellipse(24144.055267, 9348.404701, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Feb 22 21:58:20 2012] Writing source region out to fullrun_mos2_xmm0412591201_pi300-10000_pass1_cl_src3_src.reg
[Wed Feb 22 21:58:20 2012] Extracting stamp from image fullrun_mos2_xmm0412591201_pi300-10000_cl_sm2.00.img.gz, (241, 71) - (316, 146)
[Wed Feb 22 21:58:20 2012] XMMSAS bgd. selection expression = annulus(24144.055267, 9348.404701, 1087.500000, 2175.000000, X, Y) && !ellipse(24240.063782, 10303.668976, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24222.705200, 11433.723785, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24400.160000, 13143.274000, 2437.792070, 2437.792070, 0.000000, X, Y) && !ellipse(24469.858000, 10886.374000, 1291.304037, 1291.304037, 0.000000, X, Y) && !ellipse(24215.312000, 8309.780000, 2246.504065, 2246.504065, 0.000000, X, Y) && !ellipse(24605.799377, 12233.227448, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23804.992096, 10490.223282, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23724.759766, 9771.465698, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24003.675903, 12141.573181, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23674.571800, 13267.800000, 1871.960054, 743.520821, 90.936000, X, Y) && !ellipse(23549.806610, 8411.246399, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23712.260600, 12791.573200, 1871.960054, 565.832816, 90.333000, X, Y) && !ellipse(23401.215240, 7820.398834, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Feb 22 21:58:20 2012] Writing fullrun_mos2_xmm0412591201_pi300-10000_pass1_cl_src3.gif
[Wed Feb 22 22:29:08 2012] Mean detx,y = (363.00, 14999.10) 
[Wed Feb 22 22:29:10 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Feb 22 22:29:24 2012] Binned source spectrum to 10 counts/bin
[Wed Feb 22 22:29:24 2012] Setting source spectrum file to fullrun_mos2_xmm0412591201_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Wed Feb 22 22:29:24 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0412591201_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Thu Feb 23 02:34:27 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Feb 23 02:34:27 2012] rmf not generated due to insufficient counts
[Thu Feb 23 06:23:40 2012] Updating aperture counts using extracted products
[Thu Feb 23 06:23:40 2012] Error reading totcts from fullrun_mos2_xmm0412591201_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Thu Feb 23 06:23:44 2012] Calculating source flux in energy range 0.30-8.00
[Thu Feb 23 06:23:44 2012] Using photon index=1.80, rate=0.0608, arf fullrun_mos2_xmm0412591201_pi300-10000_pass1_cl_src3.arf
[Thu Feb 23 06:23:44 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Feb 23 06:23:44 2012] Updating source flux to 3e-12
[Thu Feb 23 06:33:04 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting